| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1375709684.5454.2.camel@dcbw.foobar.com> Date: Mon, 05 Aug 2013 08:34:44 -0500 From: Dan Williams <dcbw@...hat.com> To: Enrico Mioso <mrkiko.rs@...il.com> Cc: netdev@...r.kernel.org, linux-usb@...r.kernel.org Subject: Re: Alcatel X220S HSDPA modem On Sun, 2013-08-04 at 01:59 +0200, Enrico Mioso wrote: > Hello everybody! > I'm going to investigate a little bit on an obscure Alcatel device - the > Alcatel X220s, manifactured by TCT Mobile Phones. > > It supports a NDIS network interface, as you will be able to discover looking > at the driver package, still: don't know what's the protocol used. > At a first glance, I would just like to avoid option.ko binding to non-serial > interface as it happens now. So I would appreciate it a lot if you help me > distinguish non-serial interfaces from serial ones, looking at this lsusb > listing and the driver package (see link below). > > Another strange thing is - the device interface referred as the WAN one is "06" > but here we ave from 0 to 5 interfaces! > Looking at this msdn article, it seems Windows does no elaboration regarding > the InterfaceNumber field. So - am I missing an interface or does Windows start > numbering interfaces from 1? Some devices expose different USB layouts based on the command that's sent to them to "switch" them from fake-driver-CD mode to modem mode. If you're at all able to sniff the modeswitch command maybe we could see if it's the same one as what usb_modeswitch sends on Linux? Dan > Driver package link: > http://www.gstorm.eu/dgm/alcdrv.tar.xz > (I simply decompressed the Innosetup installer to let you browse these files > with no major issues!) > > Any help and documentation would be greatly apreciated!! > > > Bus 001 Device 002: ID 1bbb:0017 T & A Mobile Phones > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x1bbb T & A Mobile Phones > idProduct 0x0017 > bcdDevice 0.00 > iManufacturer 3 USBModem > iProduct 2 HSPA Data Card > iSerial 4 1234567890ABCDEF > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 154 > bNumInterfaces 6 > bConfigurationValue 1 > iConfiguration 1 USBModem Configuration > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 500mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 255 Vendor Specific Protocol > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 255 Vendor Specific Protocol > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 255 Vendor Specific Protocol > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 255 Vendor Specific Protocol > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x84 EP 4 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x04 EP 4 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 4 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 8 Mass Storage > bInterfaceSubClass 6 SCSI > bInterfaceProtocol 80 Bulk-Only > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x05 EP 5 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 5 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 255 Vendor Specific Protocol > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x86 EP 6 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 5 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x87 EP 7 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x06 EP 6 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Device Qualifier (for other device speed): > bLength 10 > bDescriptorType 6 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > bNumConfigurations 1 > Device Status: 0x0001 > Self Powered > > > > -- > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to majordomo@...r.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists