| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1376484880-741-3-git-send-email-hayeswang@realtek.com>
Date: Wed, 14 Aug 2013 20:54:40 +0800
From: Hayes Wang <hayeswang@...ltek.com>
To: <netdev@...r.kernel.org>
CC: <nic_swsd@...ltek.com>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>, Hayes Wang <hayeswang@...ltek.com>
Subject: [PATCH net-next v2 3/3] net/usb/r8152: enable interrupt transfer
Use the interrupt transfer to replace polling link status.
Signed-off-by: Hayes Wang <hayeswang@...ltek.com>
---
drivers/net/usb/r8152.c | 140 ++++++++++++++++++++++++++++++++++++++----------
1 file changed, 113 insertions(+), 27 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 4d938a7..ef2498c 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -272,6 +272,9 @@ enum rtl_register_content {
#define RTL8152_MAX_TX 10
#define RTL8152_MAX_RX 10
+#define INTBUFSIZE 2
+
+#define INTR_LINK 0x0004
#define RTL8152_REQT_READ 0xc0
#define RTL8152_REQT_WRITE 0x40
@@ -292,7 +295,8 @@ enum rtl_register_content {
enum rtl8152_flags {
RTL8152_UNPLUG = 0,
RTL8152_SET_RX_MODE,
- WORK_ENABLE
+ WORK_ENABLE,
+ RTL8152_LINK_CHG,
};
/* Define these values to match your device */
@@ -347,7 +351,9 @@ struct r8152 {
unsigned long flags;
struct usb_device *udev;
struct tasklet_struct tl;
+ struct usb_interface *intf;
struct net_device *netdev;
+ struct urb *intr_urb;
struct tx_agg tx_info[RTL8152_MAX_TX];
struct rx_agg rx_info[RTL8152_MAX_RX];
struct list_head rx_done, tx_free;
@@ -355,8 +361,10 @@ struct r8152 {
spinlock_t rx_lock, tx_lock;
struct delayed_work schedule;
struct mii_if_info mii;
+ int intr_interval;
u32 msg_enable;
u16 ocp_base;
+ u8 *intr_buff;
u8 version;
u8 speed;
};
@@ -860,6 +868,62 @@ static void write_bulk_callback(struct urb *urb)
tasklet_schedule(&tp->tl);
}
+static void intr_callback(struct urb *urb)
+{
+ struct r8152 *tp;
+ __u16 *d;
+ int status = urb->status;
+ int res;
+
+ tp = urb->context;
+ if (!tp)
+ return;
+
+ if (!test_bit(WORK_ENABLE, &tp->flags))
+ return;
+
+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
+ return;
+
+ switch (status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ESHUTDOWN:
+ netif_device_detach(tp->netdev);
+ case -ENOENT:
+ return;
+ case -EOVERFLOW:
+ netif_info(tp, intr, tp->netdev, "intr status -EOVERFLOW\n");
+ goto resubmit;
+ /* -EPIPE: should clear the halt */
+ default:
+ netif_info(tp, intr, tp->netdev, "intr status %d\n", status);
+ goto resubmit;
+ }
+
+ d = urb->transfer_buffer;
+ if (INTR_LINK & __le16_to_cpu(d[0])) {
+ if (!(tp->speed & LINK_STATUS)) {
+ set_bit(RTL8152_LINK_CHG, &tp->flags);
+ schedule_delayed_work(&tp->schedule, 0);
+ }
+ } else {
+ if (tp->speed & LINK_STATUS) {
+ set_bit(RTL8152_LINK_CHG, &tp->flags);
+ schedule_delayed_work(&tp->schedule, 0);
+ }
+ }
+
+resubmit:
+ res = usb_submit_urb(urb, GFP_ATOMIC);
+ if (res == -ENODEV)
+ netif_device_detach(tp->netdev);
+ else if (res)
+ netif_err(tp, intr, tp->netdev,
+ "can't resubmit intr, status %d\n", res);
+}
+
static inline void *rx_agg_align(void *data)
{
return (void *)ALIGN((uintptr_t)data, 8);
@@ -899,11 +963,24 @@ static void free_all_mem(struct r8152 *tp)
tp->tx_info[i].head = NULL;
}
}
+
+ if (tp->intr_urb) {
+ usb_free_urb(tp->intr_urb);
+ tp->intr_urb = NULL;
+ }
+
+ if (tp->intr_buff) {
+ kfree(tp->intr_buff);
+ tp->intr_buff = NULL;
+ }
}
static int alloc_all_mem(struct r8152 *tp)
{
struct net_device *netdev = tp->netdev;
+ struct usb_interface *intf = tp->intf;
+ struct usb_host_interface *alt = intf->cur_altsetting;
+ struct usb_host_endpoint *ep_intr = alt->endpoint + 2;
struct urb *urb;
int node, i;
u8 *buf;
@@ -968,6 +1045,19 @@ static int alloc_all_mem(struct r8152 *tp)
list_add_tail(&tp->tx_info[i].list, &tp->tx_free);
}
+ tp->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!tp->intr_urb)
+ goto err1;
+
+ tp->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
+ if (!tp->intr_buff)
+ goto err1;
+
+ tp->intr_interval = (int)ep_intr->desc.bInterval;
+ usb_fill_int_urb(tp->intr_urb, tp->udev, usb_rcvintpipe(tp->udev, 3),
+ tp->intr_buff, INTBUFSIZE, intr_callback,
+ tp, tp->intr_interval);
+
return 0;
err1:
@@ -1228,8 +1318,10 @@ static void rtl8152_set_rx_mode(struct net_device *netdev)
{
struct r8152 *tp = netdev_priv(netdev);
- if (tp->speed & LINK_STATUS)
+ if (tp->speed & LINK_STATUS) {
set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+ schedule_delayed_work(&tp->schedule, 0);
+ }
}
static void _rtl8152_set_rx_mode(struct net_device *netdev)
@@ -1648,7 +1740,6 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
r8152_mdio_write(tp, MII_BMCR, bmcr);
out:
- schedule_delayed_work(&tp->schedule, 5 * HZ);
return ret;
}
@@ -1671,6 +1762,7 @@ static void set_carrier(struct r8152 *tp)
struct net_device *netdev = tp->netdev;
u8 speed;
+ clear_bit(RTL8152_LINK_CHG, &tp->flags);
speed = rtl8152_get_speed(tp);
if (speed & LINK_STATUS) {
@@ -1700,13 +1792,12 @@ static void rtl_work_func_t(struct work_struct *work)
if (test_bit(RTL8152_UNPLUG, &tp->flags))
goto out1;
- set_carrier(tp);
+ if (test_bit(RTL8152_LINK_CHG, &tp->flags))
+ set_carrier(tp);
if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
_rtl8152_set_rx_mode(tp->netdev);
- schedule_delayed_work(&tp->schedule, HZ);
-
out1:
return;
}
@@ -1716,28 +1807,20 @@ static int rtl8152_open(struct net_device *netdev)
struct r8152 *tp = netdev_priv(netdev);
int res = 0;
- tp->speed = rtl8152_get_speed(tp);
- if (tp->speed & LINK_STATUS) {
- res = rtl8152_enable(tp);
- if (res) {
- if (res == -ENODEV)
- netif_device_detach(tp->netdev);
-
- netif_err(tp, ifup, netdev,
- "rtl8152_open failed: %d\n", res);
- return res;
- }
-
- netif_carrier_on(netdev);
- } else {
- netif_stop_queue(netdev);
- netif_carrier_off(netdev);
+ res = usb_submit_urb(tp->intr_urb, GFP_KERNEL);
+ if (res) {
+ if (res == -ENODEV)
+ netif_device_detach(tp->netdev);
+ netif_warn(tp, ifup, netdev,
+ "intr_urb submit failed: %d\n", res);
+ return res;
}
rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL);
+ tp->speed = 0;
+ netif_carrier_off(netdev);
netif_start_queue(netdev);
set_bit(WORK_ENABLE, &tp->flags);
- schedule_delayed_work(&tp->schedule, 0);
return res;
}
@@ -1747,6 +1830,7 @@ static int rtl8152_close(struct net_device *netdev)
struct r8152 *tp = netdev_priv(netdev);
int res = 0;
+ usb_kill_urb(tp->intr_urb);
clear_bit(WORK_ENABLE, &tp->flags);
cancel_delayed_work_sync(&tp->schedule);
netif_stop_queue(netdev);
@@ -1872,6 +1956,7 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
if (netif_running(tp->netdev)) {
clear_bit(WORK_ENABLE, &tp->flags);
+ usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
tasklet_disable(&tp->tl);
}
@@ -1888,10 +1973,11 @@ static int rtl8152_resume(struct usb_interface *intf)
r8152b_init(tp);
netif_device_attach(tp->netdev);
if (netif_running(tp->netdev)) {
- rtl8152_enable(tp);
+ rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL);
+ tp->speed = 0;
+ netif_carrier_off(tp->netdev);
set_bit(WORK_ENABLE, &tp->flags);
- set_bit(RTL8152_SET_RX_MODE, &tp->flags);
- schedule_delayed_work(&tp->schedule, 0);
+ usb_submit_urb(tp->intr_urb, GFP_KERNEL);
tasklet_enable(&tp->tl);
}
@@ -2027,13 +2113,13 @@ static int rtl8152_probe(struct usb_interface *intf,
tp->udev = udev;
tp->netdev = netdev;
+ tp->intf = intf;
netdev->netdev_ops = &rtl8152_netdev_ops;
netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
netdev->features |= NETIF_F_IP_CSUM;
netdev->hw_features = NETIF_F_IP_CSUM;
SET_ETHTOOL_OPS(netdev, &ops);
- tp->speed = 0;
tp->mii.dev = netdev;
tp->mii.mdio_read = read_mii_word;
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists