[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+V-a8tDUE8Ni2CbJchA0rnTY3OijBuLK6L=OtH_FDXupOn9tg@mail.gmail.com>
Date: Fri, 16 Aug 2013 09:37:31 +0530
From: Prabhakar Lad <prabhakar.csengg@...il.com>
To: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
Cc: Sekhar Nori <nsekhar@...com>,
DLOS <davinci-linux-open-source@...ux.davincidsp.com>,
LKML <linux-kernel@...r.kernel.org>,
device-tree <devicetree-discuss@...ts.ozlabs.org>,
LAK <linux-arm-kernel@...ts.infradead.org>,
netdev@...r.kernel.org
Subject: Re: [PATCH v4 4/5] ARM: davinci: da850: add DT node for eth0.
Hi Sergei,
On Fri, Aug 16, 2013 at 1:00 AM, Sergei Shtylyov
<sergei.shtylyov@...entembedded.com> wrote:
> Hello.
>
>
> On 15-08-2013 10:01, Lad, Prabhakar wrote:
>
>> From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
>
>
>> Add eth0 device tree node information and pinmux for mii to da850 by
>> providing interrupt details and local mac address of eth0.
>
>
>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@...il.com>
>
> [...]
>
>
>> @@ -226,6 +242,20 @@
>> #size-cells = <0>;
>> reg = <0x224000 0x1000>;
>> };
>> + eth0: emac@...0000 {
>
>
> According to the ePAPR spec[1] section 2.2.2, the node should be named
> "ethernet".
>
Thanks for pointing it, I'll fix and repost it.
Regards,
--Prabhakar Lad
> [1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
>
> WBR, Sergei
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists