netdev - Re: [PATCH v4 3/5] net: ethernet: cpsw: introduce ti,am3352-cpsw compatible string

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <52178E7B.5070508@ti.com>
Date:	Fri, 23 Aug 2013 22:01:55 +0530
From:	Sekhar Nori <nsekhar@...com>
To:	Santosh Shilimkar <santosh.shilimkar@...com>
CC:	Daniel Mack <zonque@...il.com>, <netdev@...r.kernel.org>,
	<bcousson@...libre.com>, <sergei.shtylyov@...entembedded.com>,
	<davem@...emloft.net>, <ujhelyi.m@...il.com>,
	<mugunthanvnm@...com>, <vaibhav.bedia@...com>, <d-gerlach@...com>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-omap@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH v4 3/5] net: ethernet: cpsw: introduce ti,am3352-cpsw
 compatible string

On 8/23/2013 7:53 PM, Santosh Shilimkar wrote:
> On Friday 23 August 2013 10:16 AM, Daniel Mack wrote:
>> In order to support features that are specific to the AM335x IP, we have
>> to add hardware types and another compatible string.
>>
>> Signed-off-by: Daniel Mack <zonque@...il.com>
>> ---
>>  Documentation/devicetree/bindings/net/cpsw.txt |  3 ++-
>>  drivers/net/ethernet/ti/cpsw.c                 | 32 ++++++++++++++++++++------
>>  drivers/net/ethernet/ti/cpsw.h                 |  1 +
>>  3 files changed, 28 insertions(+), 8 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
>> index 4e5ca54..b717458 100644
>> --- a/Documentation/devicetree/bindings/net/cpsw.txt
>> +++ b/Documentation/devicetree/bindings/net/cpsw.txt
>> @@ -2,7 +2,8 @@ TI SoC Ethernet Switch Controller Device Tree Bindings
>>  ------------------------------------------------------
>>  
>>  Required properties:
>> -- compatible		: Should be "ti,cpsw"
>> +- compatible		: Should be "ti,cpsw" for generic cpsw support, or
>> +			  "ti,am3352-cpsw" for AM3352 SoCs
>>  - reg			: physical base address and size of the cpsw
>>  			  registers map.
>>  			  An optional third memory region can be supplied if
>> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
>> index 7a25ff4..73c44cb6 100644
>> --- a/drivers/net/ethernet/ti/cpsw.c
>> +++ b/drivers/net/ethernet/ti/cpsw.c
>> @@ -155,6 +155,11 @@ do {								\
>>  		((priv->data.dual_emac) ? priv->emac_port :	\
>>  		priv->data.active_slave)
>>  
>> +enum {
>> +	CPSW_TYPE_GENERIC,
>> +	CPSW_TYPE_AM33XX
>> +};
>> +
>>  static int debug_level;
>>  module_param(debug_level, int, 0);
>>  MODULE_PARM_DESC(debug_level, "cpsw debug level (NETIF_MSG bits)");
>> @@ -1692,17 +1697,36 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv,
>>  	slave->port_vlan = data->dual_emac_res_vlan;
>>  }
>>  
>> +static const struct of_device_id cpsw_of_mtable[] = {
>> +	{
>> +		.compatible	= "ti,am3352-cpsw",
> I didn't notice this earlier, but can't you use the IP version
> as a compatible instead of using a SOC name. Whats really SOC specific
> on this IP ? Sorry i have missed any earlier discussion on this but
> this approach doesn't seem good. Its like adding SOC checks in the
> driver subsystem.

The objection then should not just be to the name of compatible string,
but to handling AM335x control module register in CPSW driver. What
would be the alternate method of doing what Daniel is doing? I vaguely
remember there were attempts to develop an independent control module
driver that were abandoned.

Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html