netdev - Re: [PATCH v2 2/2] ARM: at91/dt: define phy available on sama5d3 mother board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <521B5947.6050009@overkiz.com>
Date:	Mon, 26 Aug 2013 15:33:59 +0200
From:	boris brezillon <b.brezillon@...rkiz.com>
To:	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
CC:	Rob Herring <rob.herring@...xeda.com>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Stephen Warren <swarren@...dotorg.org>,
	Ian Campbell <ian.campbell@...rix.com>,
	Russell King <linux@....linux.org.uk>,
	Nicolas Ferre <nicolas.ferre@...el.com>,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [PATCH v2 2/2] ARM: at91/dt: define phy available on sama5d3
 mother board

Hello Sergei,

On 26/08/2013 15:21, Sergei Shtylyov wrote:
> Hello.
>
> On 26-08-2013 16:35, Boris BREZILLON wrote:
>
>> This patch describe the phy used on atmel sama5d3 mother board:
>>   - phy address
>>   - phy interrupt pin
>
>> Signed-off-by: Boris BREZILLON <b.brezillon@...rkiz.com>
>> ---
>>   arch/arm/boot/dts/sama5d3xmb.dtsi |    8 ++++++++
>>   1 file changed, 8 insertions(+)
>
>> diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi 
>> b/arch/arm/boot/dts/sama5d3xmb.dtsi
>> index 8a9e05d..e9521d5 100644
>> --- a/arch/arm/boot/dts/sama5d3xmb.dtsi
>> +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
>> @@ -81,6 +81,14 @@
>>
>>               macb1: ethernet@...2c000 {
>>                   phy-mode = "rmii";
>> +
>> +                #address-cells = <1>;
>> +                #size-cells = <0>;
>> +                phy0: ethernet-phy@0 {
>
>    Address part of the node name doesn't match the "reg" property.

Indeed, I based my definition on arch/arc/boot/dts/angel4.dts where phy 
is registered like this :

             phy0: ethernet-phy@0 {
                 reg = <1>;
             };

I think it's buggy there too, because I checked other dts files and they 
all put the same address
after @ and in reg register.

I'll fix this fot the next version.

Thanks

Best Regards,
Boris



>
>> +                    interrupt-parent = <&pioE>;
>> +                    interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
>> +                    reg = <1>;
>> +                };
>
> WBR, Sergei
>

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html