| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJxxZ0Mmei9sOX0op3uU1WXqYL84_-tgbJf4TYSg7Tas6kCNdg@mail.gmail.com>
Date: Wed, 28 Aug 2013 18:25:27 +0800
From: Sonic Zhang <sonic.adi@...il.com>
To: Giuseppe CAVALLARO <peppe.cavallaro@...com>
Cc: netdev <netdev@...r.kernel.org>,
adi-buildroot-devel@...ts.sourceforge.net,
Sonic Zhang <sonic.zhang@...log.com>
Subject: Re: [PATCH v3] driver:net:stmmac: Disable DMA store and forward mode
if platform data force_thresh_dma_mode is set.
Hi Peppe,
On Wed, Aug 28, 2013 at 5:17 PM, Giuseppe CAVALLARO
<peppe.cavallaro@...com> wrote:
> hello some comments below
>
> On 8/28/2013 7:40 AM, Sonic Zhang wrote:
>>
>> From: Sonic Zhang <sonic.zhang@...log.com>
>>
>> Some synopsys ip implementation doesn't support DMA store and forward
>> mode,
>> such as BF60x. So, set force_thresh_dma_mode to use DMA thresholds only.
>> Update document and devicetree as well.
>>
>> Signed-off-by: Sonic Zhang <sonic.zhang@...log.com>
>> ---
>> Documentation/devicetree/bindings/net/stmmac.txt | 2 ++
>> Documentation/networking/stmmac.txt | 3 +++
>> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++-
>> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 +++
>> include/linux/stmmac.h | 1 +
>> 5 files changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt
>> b/Documentation/devicetree/bindings/net/stmmac.txt
>> index 261c563..56fbcb5 100644
>> --- a/Documentation/devicetree/bindings/net/stmmac.txt
>> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
>> @@ -22,6 +22,8 @@ Required properties:
>> - snps,pbl Programmable Burst Length
>> - snps,fixed-burst Program the DMA to use the fixed burst mode
>> - snps,mixed-burst Program the DMA to use the mixed burst mode
>> +- snps,force_thresh_dma_mode Force DMA to use the Shreshold mode other
>> than
>
>
> ^^^^^^^^^ typo
>
>
>
>> + the Store and Forward mode.
>
>
> if we use this approach you should document that the force_thresh_dma_mode
> and force_sf_dma_mode will force the mode for both tx and rx.
OK
>
> I am wondering now what happens if these are passed together from the
> platform? is your code covering this scenario?
Yes, in case both are set, I unset flag force_sf_dma_mode. So, only
force_thresh_dma_mode takes effect.
>
> we could have a unique force_dma_mode that can be:
>
> rx_force_threshold
> tx_force_threshold
> rx_force_sf
> tx_force_sf
> ( these can be defined in the stmmac.h platform header )
>
> but this an impact on all the platforms that already use the
> force_sf_dma_mode as we said
So, I prefer current 2-flag solution.
>
> In this case you should fix this and maybe the patch should be for net-next
> (add it in the subject next time).
I will add "for net-next" to the subject.
>
> peppe
>
>
>>
>> Optional properties:
>> - mac-address: 6 bytes, mac address
>> diff --git a/Documentation/networking/stmmac.txt
>> b/Documentation/networking/stmmac.txt
>> index 654d2e5..457b8bb 100644
>> --- a/Documentation/networking/stmmac.txt
>> +++ b/Documentation/networking/stmmac.txt
>> @@ -123,6 +123,7 @@ struct plat_stmmacenet_data {
>> int bugged_jumbo;
>> int pmt;
>> int force_sf_dma_mode;
>> + int force_thresh_dma_mode;
>> int riwt_off;
>> void (*fix_mac_speed)(void *priv, unsigned int speed);
>> void (*bus_setup)(void __iomem *ioaddr);
>> @@ -159,6 +160,8 @@ Where:
>> o pmt: core has the embedded power module (optional).
>> o force_sf_dma_mode: force DMA to use the Store and Forward mode
>> instead of the Threshold.
>> + o force_thresh_dma_mode: force DMA to use the Shreshold mode other than
>> + the Store and Forward mode.
>> o riwt_off: force to disable the RX watchdog feature and switch to NAPI
>> mode.
>> o fix_mac_speed: this callback is used for modifying some syscfg
>> registers
>> (on ST SoCs) according to the link speed negotiated by
>> the
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index be40691..8d4ccd3 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -1224,7 +1224,9 @@ static void free_dma_desc_resources(struct
>> stmmac_priv *priv)
>> */
>> static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
>> {
>> - if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
>> + if (priv->plat->force_thresh_dma_mode)
>> + priv->hw->dma->dma_mode(priv->ioaddr, tc, tc);
>> + else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
>> /*
>> * In case of GMAC, SF mode can be enabled
>> * to perform the TX COE in HW. This depends on:
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> index da8be6e..865c944 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> @@ -79,6 +79,9 @@ static int stmmac_probe_config_dt(struct platform_device
>> *pdev,
>> of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
>> dma_cfg->fixed_burst = of_property_read_bool(np,
>> "snps,fixed-burst");
>> dma_cfg->mixed_burst = of_property_read_bool(np,
>> "snps,mixed-burst");
>> + plat->force_thresh_dma_mode = of_property_read_bool(np,
>> "snps,force_thresh_dma_mode");
>> + if (plat->force_thresh_dma_mode)
>> + plat->force_sf_dma_mode = 0;
>>
>> return 0;
>> }
>> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
>> index 9e495d31..bb5deb0 100644
>> --- a/include/linux/stmmac.h
>> +++ b/include/linux/stmmac.h
>> @@ -108,6 +108,7 @@ struct plat_stmmacenet_data {
>> int bugged_jumbo;
>> int pmt;
>> int force_sf_dma_mode;
>> + int force_thresh_dma_mode;
>> int riwt_off;
>> void (*fix_mac_speed)(void *priv, unsigned int speed);
>> void (*bus_setup)(void __iomem *ioaddr);
>>
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists