| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1377906694-9578-3-git-send-email-linux@roeck-us.net>
Date: Fri, 30 Aug 2013 16:51:28 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: linux-kernel@...r.kernel.org
Cc: linux-ide@...r.kernel.org, netdev@...r.kernel.org,
linux-watchdog@...r.kernel.org, Wim Van Sebroeck <wim@...ana.be>,
"David S. Miller" <davem@...emloft.net>,
Yoshinori Sato <ysato@...rs.sourceforge.jp>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Al Viro <viro@...iv.linux.org.uk>,
Eric Paris <eparis@...hat.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiang Liu <jiang.liu@...wei.com>,
David Howells <dhowells@...hat.com>,
Thomas Gleixner <tglx@...utronix.de>,
Stephen Rothwell <sfr@...b.auug.org.au>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Guenter Roeck <linux@...ck-us.net>
Subject: [PATCH v2 2/8] ide: Drop H8/300 driver
Architecture is gone, so there is no need to keep its ide driver around.
Cc: Yoshinori Sato <ysato@...rs.sourceforge.jp>
Acked-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Acked-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Guenter Roeck <linux@...ck-us.net>
---
drivers/ide/Kconfig | 7 ---
drivers/ide/Makefile | 2 -
drivers/ide/ide-h8300.c | 109 -----------------------------------------------
3 files changed, 118 deletions(-)
delete mode 100644 drivers/ide/ide-h8300.c
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 02906ca..5dba90a 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -722,13 +722,6 @@ config BLK_DEV_IDE_RAPIDE
Say Y here if you want to support the Yellowstone RapIDE controller
manufactured for use with Acorn computers.
-config IDE_H8300
- tristate "H8300 IDE support"
- depends on H8300
- default y
- help
- Enables the H8300 IDE driver.
-
config BLK_DEV_GAYLE
tristate "Amiga Gayle IDE interface support"
depends on AMIGA
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index af8d016..a04ee82 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -78,8 +78,6 @@ obj-$(CONFIG_BLK_DEV_CMD640) += cmd640.o
obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o
-obj-$(CONFIG_IDE_H8300) += ide-h8300.o
-
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
diff --git a/drivers/ide/ide-h8300.c b/drivers/ide/ide-h8300.c
deleted file mode 100644
index 520f42c..0000000
--- a/drivers/ide/ide-h8300.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * H8/300 generic IDE interface
- */
-
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define DRV_NAME "ide-h8300"
-
-#define bswap(d) \
-({ \
- u16 r; \
- __asm__("mov.b %w1,r1h\n\t" \
- "mov.b %x1,r1l\n\t" \
- "mov.w r1,%0" \
- :"=r"(r) \
- :"r"(d) \
- :"er1"); \
- (r); \
-})
-
-static void mm_outsw(unsigned long addr, void *buf, u32 len)
-{
- unsigned short *bp = (unsigned short *)buf;
- for (; len > 0; len--, bp++)
- *(volatile u16 *)addr = bswap(*bp);
-}
-
-static void mm_insw(unsigned long addr, void *buf, u32 len)
-{
- unsigned short *bp = (unsigned short *)buf;
- for (; len > 0; len--, bp++)
- *bp = bswap(*(volatile u16 *)addr);
-}
-
-static void h8300_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- mm_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
-}
-
-static void h8300_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- mm_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
-}
-
-static const struct ide_tp_ops h8300_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = h8300_input_data,
- .output_data = h8300_output_data,
-};
-
-#define H8300_IDE_GAP (2)
-
-static inline void hw_setup(struct ide_hw *hw)
-{
- int i;
-
- memset(hw, 0, sizeof(*hw));
- for (i = 0; i <= 7; i++)
- hw->io_ports_array[i] = CONFIG_H8300_IDE_BASE + H8300_IDE_GAP*i;
- hw->io_ports.ctl_addr = CONFIG_H8300_IDE_ALT;
- hw->irq = EXT_IRQ0 + CONFIG_H8300_IDE_IRQ;
-}
-
-static const struct ide_port_info h8300_port_info = {
- .tp_ops = &h8300_tp_ops,
- .host_flags = IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA,
- .chipset = ide_generic,
-};
-
-static int __init h8300_ide_init(void)
-{
- struct ide_hw hw, *hws[] = { &hw };
-
- printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n");
-
- if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300"))
- goto out_busy;
- if (!request_region(CONFIG_H8300_IDE_ALT, H8300_IDE_GAP, "ide-h8300")) {
- release_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8);
- goto out_busy;
- }
-
- hw_setup(&hw);
-
- return ide_host_add(&h8300_port_info, hws, 1, NULL);
-
-out_busy:
- printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n");
-
- return -EBUSY;
-}
-
-module_init(h8300_ide_init);
-
-MODULE_LICENSE("GPL");
--
1.7.9.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists