[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1379851166-11959-4-git-send-email-yanivr@broadcom.com>
Date: Sun, 22 Sep 2013 14:59:24 +0300
From: "Yaniv Rosner" <yanivr@...adcom.com>
To: "David Miller" <davem@...emloft.net>
cc: netdev <netdev@...r.kernel.org>,
"Eilon Greenstein" <eilong@...adcom.com>,
"Yaniv Rosner" <yanivr@...adcom.com>
Subject: [PATCH net 3/5] bnx2x: 57840 non-external loopback test fail on
1G
when 1G-optic module was plugged in, internal loopback test failed because the
driver used to check the optic module (with no need), and for 1G optic module,
the link speed was forced down to 1G, while the XMAC (10G MAC) was enabled.
This patch avoid accessing optic module in case internal loopback was selected,
and update the link speed in case 1G optic module was detected during init
stage.
Signed-off-by: Yaniv Rosner <yanivr@...adcom.com>
Signed-off-by: Eilon Greenstein <eilong@...adcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 17 +++++++++++++----
1 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 84798bb..5c6d46c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -4523,10 +4523,14 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy,
* enabled transmitter to avoid current leakage in case
* no module is connected
*/
- if (bnx2x_is_sfp_module_plugged(phy, params))
- bnx2x_sfp_module_detection(phy, params);
- else
- bnx2x_sfp_e3_set_transmitter(params, phy, 1);
+ if ((params->loopback_mode == LOOPBACK_NONE) ||
+ (params->loopback_mode == LOOPBACK_EXT)) {
+ if (bnx2x_is_sfp_module_plugged(phy, params))
+ bnx2x_sfp_module_detection(phy, params);
+ else
+ bnx2x_sfp_e3_set_transmitter(params,
+ phy, 1);
+ }
bnx2x_warpcore_config_sfi(phy, params);
break;
@@ -6528,6 +6532,11 @@ static int bnx2x_link_initialize(struct link_params *params,
params->phy[INT_PHY].config_init(phy, params, vars);
}
+ /* Re-read this value in case it was changed inside config_init due to
+ * limitations of optic module
+ */
+ vars->line_speed = params->phy[INT_PHY].req_line_speed;
+
/* Init external phy*/
if (non_ext_phy) {
if (params->phy[INT_PHY].supported &
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists