| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.DEB.2.02.1309221932590.2272@hadrien>
Date: Sun, 22 Sep 2013 19:37:45 +0200 (CEST)
From: Julia Lawall <julia.lawall@...6.fr>
To: Dirk Kraft <dirk.kraft@...il.com>
cc: netdev@...r.kernel.org
Subject: Re: Bug - regression - Via velocity interface coming up freezes
kernel
On Sun, 22 Sep 2013, Dirk Kraft wrote:
> Hi,
>
> I observe problems with my machine freezing when bringing up the
> network interface (via velocity based). Detailed report below.
>
> First message was rejected because of html. Julia Lawall, sorry about
> sending multiple copies.
>
> [1.] One line summary of the problem:
> Via_velocity interface coming up freezes kernel - WARNING: CPU: 0 PID:
> 1529 at /build/buildd/linux-3.11.0/kernel/softirq.c:159
> local_bh_enable+0x60/0x90()
>
> [2.] Full description of the problem/report:
> Bringing up the network interface (using ifup) serviced by the
> via_velocity driver the machine freezes once an ip address is assigned
> via dhcp. No further interaction, neither via the just brought up
> interface nor the serial console, is possible. A git bisect shows that
> this behaviour was introduced with
> 2fdac010bdcf10a30711b6924612dfc40daf19b8.
> During some of the freezes a kernel warning is printed to syslog. I
> was unable to see this with 3.12.0-rc1. I was able to observe this
> with v3.11-rc6 and different ubuntu kernels. The warning looks like:
> WARNING: CPU: 0 PID: 1529 at
> /build/buildd/linux-3.11.0/kernel/softirq.c:159
> local_bh_enable+0x60/0x90(). Detailed message under point 10.
> The second network interface on the board (using the via_rhine driver)
> does not show this behaviour. The board in question is a via epia
> sn18000g.
I guess that the problem is the use of netif_receive_skb instead of
netif_rx? I made the change because to my understanding netif_rx should
not be used in the NAPI poll function. Perhaps that is not correct?
The uses of netif_napi_del happen in error handling code of the probe
function and in the remove function, and it doesn't seem like that code is
being executed here?
julia
> [3.] Keywords (i.e., modules, networking, kernel):
>
> [4.] Kernel version (from /proc/version):
> Linux version 3.12.0-031200rc1-generic (apw@...eisa) (gcc version
> 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201309161735 SMP Mon Sep 16
> 21:51:46 UTC 2013
>
> [5.] Output of Oops.. message (if applicable) with symbolic
> information resolved (see Documentation/oops-tracing.txt)
>
> [6.] A small shell script or example program which triggers the
> problem (if possible)
>
> [7.] Environment
> Description: Ubuntu Saucy Salamander (development branch)
> Release: 13.10
>
> [7.1.] Software (add the output of the ver_linux script here)
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux nas 3.12.0-031200rc1-generic #201309161735 SMP Mon Sep 16
> 21:51:46 UTC 2013 i686 i686 i686 GNU/Linux
>
> Gnu C 4.8
> Gnu make 3.81
> binutils 2.23.52.20130913
> util-linux 2.20.1
> mount support
> module-init-tools 9
> e2fsprogs 1.42.8
> reiserfsprogs 3.6.21
> Linux C Library 2.17
> Dynamic linker (ldd) 2.17
> /usr/bin/ldd: line 41: printf: write error: Broken pipe
> /usr/bin/ldd: line 43: printf: write error: Broken pipe
> Procps 3.3.3
> Net-tools 1.60
> Kbd 1.15.5
> Sh-utils 8.20
> wireless-tools 30
> Modules Loaded snd_hda_codec_via snd_hda_intel snd_hda_codec
> snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event
> snd_rawmidi snd_seq snd_seq_device snd_timer snd psmouse via_cputemp
> soundcore serio_raw i2c_viapro shpchp mac_hid hwmon_vid lp parport
> binfmt_misc raid10 raid1 raid0 multipath linear dm_crypt raid456
> async_raid6_recov async_memcpy async_pq async_xor async_tx xor
> raid6_pq padlock_sha pata_acpi padlock_aes via_rhine via_rng ahci
> via_velocity mii libahci pata_via crc_ccitt
>
> [7.2.] Processor information (from /proc/cpuinfo):
> dirk@nas:~$ cat /proc/cpuinfo
> processor : 0
> vendor_id : CentaurHauls
> cpu family : 6
> model : 13
> model name : VIA C7 Processor 1800MHz
> stepping : 0
> cpu MHz : 800.000
> cache size : 128 KB
> fdiv_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> cmov pat clflush acpi mmx fxsr sse sse2 tm nx pni est tm2 xtpr rng
> rng_en ace ace_en ace2 ace2_en phe phe_en pmm pmm_en
> bogomips : 1595.96
> clflush size : 64
> cache_alignment : 64
> address sizes : 36 bits physical, 32 bits virtual
> power management:
>
> [7.3.] Module information (from /proc/modules):
> snd_hda_codec_via 23198 1 - Live 0x00000000
> snd_hda_intel 43367 0 - Live 0x00000000
> snd_hda_codec 169632 2 snd_hda_codec_via,snd_hda_intel, Live 0x00000000
> snd_hwdep 13276 1 snd_hda_codec, Live 0x00000000
> snd_pcm 90501 2 snd_hda_intel,snd_hda_codec, Live 0x00000000
> snd_page_alloc 18398 2 snd_hda_intel,snd_pcm, Live 0x00000000
> snd_seq_midi 13132 0 - Live 0x00000000
> snd_seq_midi_event 14475 1 snd_seq_midi, Live 0x00000000
> snd_rawmidi 25198 1 snd_seq_midi, Live 0x00000000
> snd_seq 55716 2 snd_seq_midi,snd_seq_midi_event, Live 0x00000000
> snd_seq_device 14137 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0x00000000
> snd_timer 28971 2 snd_pcm,snd_seq, Live 0x00000000
> snd 61311 10 snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_midi,snd_rawmidi,snd_seq,snd_seq_device,snd_timer,
> Live 0x00000000
> psmouse 92689 0 - Live 0x00000000
> via_cputemp 12995 0 - Live 0x00000000
> soundcore 12600 1 snd, Live 0x00000000
> serio_raw 13230 0 - Live 0x00000000
> i2c_viapro 13130 0 - Live 0x00000000
> shpchp 32265 0 - Live 0x00000000
> mac_hid 13077 0 - Live 0x00000000
> hwmon_vid 12723 1 via_cputemp, Live 0x00000000
> lp 13359 0 - Live 0x00000000
> parport 40945 1 lp, Live 0x00000000
> binfmt_misc 13172 1 - Live 0x00000000
> raid10 48030 0 - Live 0x00000000
> raid1 35268 0 - Live 0x00000000
> raid0 17594 0 - Live 0x00000000
> multipath 12977 0 - Live 0x00000000
> linear 12766 0 - Live 0x00000000
> dm_crypt 22524 0 - Live 0x00000000
> raid456 81541 1 - Live 0x00000000
> async_raid6_recov 13000 1 raid456, Live 0x00000000
> async_memcpy 12578 2 raid456,async_raid6_recov, Live 0x00000000
> async_pq 13082 2 raid456,async_raid6_recov, Live 0x00000000
> async_xor 12932 3 raid456,async_raid6_recov,async_pq, Live 0x00000000
> async_tx 13251 5
> raid456,async_raid6_recov,async_memcpy,async_pq,async_xor, Live
> 0x00000000
> xor 26221 1 async_xor, Live 0x00000000
> raid6_pq 97455 2 async_raid6_recov,async_pq, Live 0x00000000
> padlock_sha 13317 0 - Live 0x00000000
> pata_acpi 12886 0 - Live 0x00000000
> padlock_aes 12899 0 - Live 0x00000000
> via_rhine 27895 0 - Live 0x00000000
> via_rng 12588 0 - Live 0x00000000
> ahci 25703 8 - Live 0x00000000
> via_velocity 37949 0 - Live 0x00000000
> mii 13693 1 via_rhine, Live 0x00000000
> libahci 30834 1 ahci, Live 0x00000000
> pata_via 13439 3 - Live 0x00000000
> crc_ccitt 12627 1 via_velocity, Live 0x00000000
>
> [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
> dirk@nas:~$ cat /proc/ioports
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-0060 : keyboard
> 0064-0064 : keyboard
> 0070-0071 : rtc0
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : 0000:00:0f.1
> 0170-0177 : pata_via
> 01f0-01f7 : 0000:00:0f.1
> 01f0-01f7 : pata_via
> 02f8-02ff : serial
> 0400-041f : pnp 00:07
> 0400-0407 : vt596_smbus
> 04d0-04d1 : pnp 00:07
> 0800-0803 : ACPI PM1a_EVT_BLK
> 0804-0805 : ACPI PM1a_CNT_BLK
> 0808-080b : ACPI PM_TMR
> 0810-0815 : ACPI CPU throttle
> 0820-0823 : ACPI GPE0_BLK
> 0850-0853 : ACPI GPE1_BLK
> 0a00-0a7f : pnp 00:06
> 0cf8-0cff : PCI conf1
> 162e-162f : pnp 00:06
> 2000-2fff : PCI Bus 0000:02
> c800-c8ff : 0000:00:12.0
> c800-c8ff : via-rhine
> cc00-cc1f : 0000:00:10.0
> cc00-cc1f : uhci_hcd
> d000-d01f : 0000:00:10.1
> d000-d01f : uhci_hcd
> d080-d09f : 0000:00:10.2
> d080-d09f : uhci_hcd
> d400-d40f : 0000:00:0f.0
> d400-d40f : ahci
> d480-d483 : 0000:00:0f.0
> d480-d483 : ahci
> d800-d807 : 0000:00:0f.0
> d800-d807 : ahci
> d880-d883 : 0000:00:0f.0
> d880-d883 : ahci
> dc00-dc07 : 0000:00:0f.0
> dc00-dc07 : ahci
> e000-efff : PCI Bus 0000:03
> e800-e8ff : 0000:03:00.0
> e800-e8ff : via-velocity
> fc00-fc0f : 0000:00:0f.1
> fc00-fc0f : pata_via
>
> dirk@nas:~$ cat /proc/iomem
> 00000000-00000fff : reserved
> 00001000-0009b3ff : System RAM
> 0009b400-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000cddff : Video ROM
> 000ce000-000cefff : Adapter ROM
> 000e0000-000fffff : reserved
> 000f0000-000fffff : System ROM
> 00100000-cfeaffff : System RAM
> 01000000-0168a762 : Kernel code
> 0168a763-019f077f : Kernel data
> 01ad3000-01bc6fff : Kernel bss
> 18000000-1fffffff : Crash kernel
> cfeb0000-cfebdfff : ACPI Tables
> cfebe000-cfefffff : ACPI Non-volatile Storage
> cff00000-cfffffff : RAM buffer
> d0000000-d01fffff : PCI Bus 0000:02
> d0200000-d03fffff : PCI Bus 0000:02
> d0400000-d05fffff : PCI Bus 0000:03
> d8000000-dfffffff : PCI Bus 0000:01
> d8000000-dfffffff : 0000:01:00.0
> e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
> e0000000-efffffff : pnp 00:09
> f0000000-f7ffffff : 0000:00:00.0
> fcfff400-fcfff4ff : 0000:00:12.0
> fcfff400-fcfff4ff : via-rhine
> fcfff800-fcfff8ff : 0000:00:10.4
> fcfff800-fcfff8ff : ehci_hcd
> fcfffc00-fcffffff : 0000:00:0f.0
> fcfffc00-fcffffff : ahci
> fd000000-fe9fffff : PCI Bus 0000:01
> fd000000-fdffffff : 0000:01:00.0
> fe9f0000-fe9fffff : 0000:01:00.0
> fea00000-feafffff : PCI Bus 0000:03
> feaffc00-feaffcff : 0000:03:00.0
> feaffc00-feaffcff : via-velocity
> febfc000-febfffff : 0000:80:01.0
> febfc000-febfffff : ICH HD audio
> fec00000-fec00fff : reserved
> fec00000-fec003ff : IOAPIC 0
> fecc0000-fecc0fff : reserved
> fecc0000-fecc03ff : IOAPIC 1
> fed1c000-fed1ffff : pnp 00:07
> fee00000-fee00fff : Local APIC
> fee00000-fee00fff : reserved
> fee00000-fee00fff : pnp 00:08
> ff780000-ffffffff : reserved
>
> [7.5.] PCI information ('lspci -vvv' as root)
> dirk@nas:~$ sudo lspci -vvv
> 00:00.0 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
> Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 8
> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> Capabilities: [80] AGP version 3.5
> Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW- AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
> FW- Rate=<none>
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: agpgart-via
>
> 00:00.1 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
> Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.2 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
> Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.3 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.4 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
> Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.5 PIC: VIA Technologies, Inc. CN896/VN896/P4M900 I/O APIC
> Interrupt Controller (prog-if 20 [IO(X)-APIC])
> Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 I/O APIC
> Interrupt Controller
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.6 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Security Device
> Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Security Device
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.7 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fd000000-fe9fffff
> Prefetchable memory behind bridge: d8000000-dfffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [70] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>
> 00:02.0 PCI bridge: VIA Technologies, Inc. CN896/VN896/P4M900 PCI to
> PCI Bridge Controller (rev 80) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: d0000000-d01fffff
> Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s
> L1, Latency L0 <512ns, L1 <1us
> ClockPM- Surprise+ LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug+ Surprise+
> Slot #0, PowerLimit 150.000W; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+
> CmdCplt+ HPIrq+ LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet- Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna+ CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [68] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+
> Capabilities: [98] Subsystem: VIA Technologies, Inc. Device c323
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Capabilities: [140 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
> Status: NegoPending- InProgress-
> Capabilities: [180 v1] Root Complex Link
> Desc: PortNumber=01 ComponentID=01 EltType=Config
> Link0: Desc: TargetPort=00 TargetComponent=01
> AssocRCRB- LinkType=MemMapped LinkValid+
> Addr: 0000000000000000
> Kernel driver in use: pcieport
>
> 00:03.0 PCI bridge: VIA Technologies, Inc. CN896/VN896/P4M900 PCI to
> PCI Bridge Controller (rev 80) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fea00000-feafffff
> Prefetchable memory behind bridge: 00000000d0400000-00000000d05fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <512ns, L1 <1us
> ClockPM- Surprise+ LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
> SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug+ Surprise+
> Slot #0, PowerLimit 150.000W; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+
> CmdCplt+ HPIrq+ LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna+ CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [68] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+
> Capabilities: [98] Subsystem: VIA Technologies, Inc. Device c323
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Capabilities: [140 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
> Status: NegoPending- InProgress-
> Capabilities: [180 v1] Root Complex Link
> Desc: PortNumber=02 ComponentID=01 EltType=Config
> Link0: Desc: TargetPort=00 TargetComponent=01
> AssocRCRB- LinkType=MemMapped LinkValid+
> Addr: 0000000000000000
> Kernel driver in use: pcieport
>
> 00:0f.0 SATA controller: VIA Technologies, Inc. SATA RAID Controller
> (rev 20) (prog-if 01 [AHCI 1.0])
> Subsystem: VIA Technologies, Inc. SATA RAID Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin B routed to IRQ 21
> Region 0: I/O ports at dc00 [size=8]
> Region 1: I/O ports at d880 [size=4]
> Region 2: I/O ports at d800 [size=8]
> Region 3: I/O ports at d480 [size=4]
> Region 4: I/O ports at d400 [size=16]
> Region 5: Memory at fcfffc00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [e0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Kernel driver in use: ahci
>
> 00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
> (prog-if 8a [Master SecP PriP])
> Subsystem: VIA Technologies, Inc.
> VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Region 0: [virtual] Memory at 000001f0 (32-bit,
> non-prefetchable) [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3,
> non-prefetchable) [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit,
> non-prefetchable) [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3,
> non-prefetchable) [size=1]
> Region 4: I/O ports at fc00 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pata_via
>
> 00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 91) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 20
> Region 4: I/O ports at cc00 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
>
> 00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 91) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 22
> Region 4: I/O ports at d000 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
>
> 00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 91) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 21
> Region 4: I/O ports at d080 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
>
> 00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 90)
> (prog-if 20 [EHCI])
> Subsystem: VIA Technologies, Inc. USB 2.0 Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 22
> Region 0: Memory at fcfff800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [88] Debug port: BAR=1 offset=00a0
> Kernel driver in use: ehci-pci
>
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
> Subsystem: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>
> 00:11.7 Host bridge: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller
> Subsystem: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 128
> Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration
>
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
> Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded
> Ethernet Controller on VT8235
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 23
> Region 0: I/O ports at c800 [size=256]
> Region 1: Memory at fcfff400 (32-bit, non-prefetchable) [size=256]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: via-rhine
>
> 00:13.0 Host bridge: VIA Technologies, Inc. VT8251 Host Bridge
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
>
> 01:00.0 VGA compatible controller: VIA Technologies, Inc.
> CN896/VN896/P4M900 [Chrome 9 HC] (rev 01) (prog-if 00 [VGA
> controller])
> Subsystem: Device 0908:1975
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (500ns min)
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
> Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> Expansion ROM at fe9f0000 [disabled] [size=64K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] AGP version 3.0
> Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW- AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit-
> FW- Rate=<none>
>
> 03:00.0 Ethernet controller: VIA Technologies, Inc.
> VT6120/VT6121/VT6122 Gigabit Ethernet Adapter (rev 82)
> Subsystem: VIA Technologies, Inc. Device 0110
> Physical Slot: 0-1
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 28
> Region 0: I/O ports at e800 [size=256]
> Region 1: Memory at feaffc00 (64-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D3 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [90] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+
> AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <2us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
> SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [c0] MSI: Enable- Count=1/1 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [130 v1] Device Serial Number 00-40-45-ff-ff-78-90-08
> Kernel driver in use: via-velocity
>
> 80:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
> (prog-if 00 [Normal decode])
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 unlimited
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train-
> SlotClk- DLActive- BWMgmt- ABWMgmt-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [68] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] MSI: Enable- Count=1/1 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+
> Capabilities: [90] Subsystem: Device 0000:0000
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Capabilities: [140 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed+ WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
> Status: NegoPending- InProgress-
> Capabilities: [180 v1] Root Complex Link
> Desc: PortNumber=01 ComponentID=01 EltType=Config
> Link0: Desc: TargetPort=00 TargetComponent=01
> AssocRCRB- LinkType=MemMapped LinkValid+
> Addr: 00000000fed1c000
> Kernel driver in use: pcieport
>
> 80:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
> (prog-if 00 [Normal decode])
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 unlimited
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train-
> SlotClk- DLActive- BWMgmt- ABWMgmt-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [68] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] MSI: Enable- Count=1/1 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+
> Capabilities: [90] Subsystem: Device 0000:0000
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Capabilities: [140 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed+ WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
> Status: NegoPending- InProgress-
> Capabilities: [180 v1] Root Complex Link
> Desc: PortNumber=02 ComponentID=01 EltType=Config
> Link0: Desc: TargetPort=00 TargetComponent=01
> AssocRCRB- LinkType=MemMapped LinkValid+
> Addr: 00000000fed1c000
> Kernel driver in use: pcieport
>
> 80:01.0 Audio device: VIA Technologies, Inc. VT8237A/VT8251 HDA Controller
> Subsystem: VIA Technologies, Inc. VT8237A/VT8251 HDA Controller
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend+
> LnkCap: Port #0, Speed unknown, Width x0, ASPM
> unknown, Latency L0 <64ns, L1 <1us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train-
> SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
> Status: NegoPending- InProgress-
> Capabilities: [130 v1] Root Complex Link
> Desc: PortNumber=03 ComponentID=01 EltType=Config
> Link0: Desc: TargetPort=00 TargetComponent=01
> AssocRCRB- LinkType=MemMapped LinkValid+
> Addr: 00000000fed1c000
> Kernel driver in use: snd_hda_intel
>
> [7.6.] SCSI information (from /proc/scsi/scsi)
> dirk@nas:~$ cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: SAMSUNG HM160HC Rev: LQ10
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: ST31500341AS Rev: CC1H
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi3 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: ST31500341AS Rev: CC1H
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi4 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: ST31500341AS Rev: CC1H
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi5 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: ST31500341AS Rev: CC1H
> Type: Direct-Access ANSI SCSI revision: 05
>
> [7.7.] Other information that might be relevant to the problem (please
> look in /proc and include all information that you think to be
> relevant):
> dirk@nas:~$ ls /proc/
> 1 1223 132 1509 163 1965 2054 26 42 597 asound
> driver key-users mounts stat vmstat
> 10 1224 134 151 1656 1975 21 2609 45 65 buddyinfo
> execdomains kmsg mtrr swaps zoneinfo
> 1097 123 137 152 166 1978 2165 263 46 66 bus
> fb kpagecount net sys
> 11 1242 1383 1541 1667 1981 2198 264 473 668 cgroups
> filesystems kpageflags pagetypeinfo sysrq-trigger
> 1124 1243 14 1542 167 1983 22 27 5 7 cmdline
> fs latency_stats partitions sysvipc
> 1130 125 1423 1550 170 1985 2217 28 504 793 consoles
> interrupts loadavg sched_debug timer_list
> 1151 13 1428 159 172 1986 2285 29 534 8 cpuinfo
> iomem locks schedstat timer_stats
> 1154 130 1442 1591 18 2 23 3 552 830 crypto
> ioports mdstat scsi tty
> 1164 1303 1458 16 1828 20 24 30 564 842 devices
> irq meminfo self uptime
> 12 131 15 160 19 2034 25 407 587 9 diskstats
> kallsyms misc slabinfo version
> 122 1319 150 162 1949 2035 2572 408 588 acpi dma
> kcore modules softirqs vmallocinfo
>
> [8.]
> Downstream bug report is here:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1225571
>
> [9.]
> Bisect log:
> git bisect start
> # good: [d4e4ab86bcba5a72779c43dc1459f71fea3d89c8] Linux 3.11-rc5
> git bisect good d4e4ab86bcba5a72779c43dc1459f71fea3d89c8
> # bad: [b36f4be3de1b123d8601de062e7dbfc904f305fb] Linux 3.11-rc6
> git bisect bad b36f4be3de1b123d8601de062e7dbfc904f305fb
> # good: [1b244081af462c223cfa6a1ae881a902af64c306] Do not attempt to
> do cifs operations reading symlinks with SMB2
> git bisect good 1b244081af462c223cfa6a1ae881a902af64c306
> # good: [cde2d7a796f7e895e25b43471ed658079345636d] ext4: flush the
> extent status cache during EXT4_IOC_SWAP_BOOT
> git bisect good cde2d7a796f7e895e25b43471ed658079345636d
> # good: [c95eb3184ea1a3a2551df57190c81da695e2144b] ARM: 7809/1: perf:
> fix event validation for software group leaders
> git bisect good c95eb3184ea1a3a2551df57190c81da695e2144b
> # bad: [e180383f569e9d9247af45403d352b06444c34ca] MAINTAINERS: Change
> ownership for SGI specific modules.
> git bisect bad e180383f569e9d9247af45403d352b06444c34ca
> # good: [dfa9771a7c4784bafd0673bc7abcee3813088b77] microblaze: fix clone syscall
> git bisect good dfa9771a7c4784bafd0673bc7abcee3813088b77
> # good: [ea077b1b96e073eac5c3c5590529e964767fc5f7] m68k: Truncate base
> in do_div()
> git bisect good ea077b1b96e073eac5c3c5590529e964767fc5f7
> # bad: [89cb9ae2382b59585381c3ae619840e64df8df97] Merge tag
> 'usb-3.11-rc6' of
> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
> git bisect bad 89cb9ae2382b59585381c3ae619840e64df8df97
> # good: [2b047252d087be7f2ba088b4933cd904f92e6fce] Fix TLB gather
> virtual address range invalidation corner cases
> git bisect good 2b047252d087be7f2ba088b4933cd904f92e6fce
> # bad: [ddea368c78ff9acf45261a7c82635b98e9c1fcd6] Merge
> git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
> git bisect bad ddea368c78ff9acf45261a7c82635b98e9c1fcd6
> # good: [9d2c9488cedb666bc8206fbdcdc1575e0fbc5929] batman-adv: fix
> potential kernel paging errors for unicast transmissions
> git bisect good 9d2c9488cedb666bc8206fbdcdc1575e0fbc5929
> # good: [50f850fdf91a9ed21bfca982932520ee21a4ccb9] Merge branch 'bnx2x'
> git bisect good 50f850fdf91a9ed21bfca982932520ee21a4ccb9
> # bad: [09a8f03197d4799bc9969b35240e5606c026ded6] Merge branch 'fixes'
> of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
> git bisect bad 09a8f03197d4799bc9969b35240e5606c026ded6
> # good: [728e2ccaa3c4d20cf4d54b73a47956bf4d334a9f] Revert "cxgb3:
> Check and handle the dma mapping errors"
> git bisect good 728e2ccaa3c4d20cf4d54b73a47956bf4d334a9f
> # bad: [2fdac010bdcf10a30711b6924612dfc40daf19b8]
> drivers/net/ethernet/via/via-velocity.c: update napi implementation
> git bisect bad 2fdac010bdcf10a30711b6924612dfc40daf19b8
>
> Because this bug is shadowed by another bug
> (https://lkml.org/lkml/2013/8/3/40) I had to apply this patch
> (http://lists.freedesktop.org/archives/dri-devel/2013-August/042668.html)
> to the versions that would not compile to do the above bisect.
>
> Output of last bisect step:
> 2fdac010bdcf10a30711b6924612dfc40daf19b8 is the first bad commit
> commit 2fdac010bdcf10a30711b6924612dfc40daf19b8
> Author: Julia Lawall <Julia.Lawall@...6.fr>
> Date: Wed Aug 14 16:26:53 2013 +0200
>
> drivers/net/ethernet/via/via-velocity.c: update napi implementation
>
> Drivers supporting NAPI should use a NAPI-specific function for receiving
> packets. Hence netif_rx is changed to netif_receive_skb.
>
> Furthermore netif_napi_del should be used in the probe and remove function
> to clean up the NAPI resource information.
>
> Thanks to Francois Romieu, David Shwatrz and Rami Rosen for their help on
> this patch.
>
> Signed-off-by: Julia Lawall <Julia.Lawall@...6.fr>
> Signed-off-by: David S. Miller <davem@...emloft.net>
>
> :040000 040000 d9315455cdfe498829f11b65554c1d906911f380
> f1e8f50bfc9dd5bb71574b121160bd28a5da8114 M drivers
>
> [10.] syslog message produced for the same freeze with
> "3.11.0-7-generic #13-Ubuntu"
> Sep 15 02:25:24 nas dhclient: Internet Systems Consortium DHCP Client 4.2.4
> Sep 15 02:25:24 nas dhclient: Copyright 2004-2012 Internet Systems Consortium.
> Sep 15 02:25:24 nas dhclient: All rights reserved.
> Sep 15 02:25:24 nas dhclient: For info, please visit
> https://www.isc.org/software/dhcp/
> Sep 15 02:25:24 nas dhclient:
> Sep 15 02:25:25 nas kernel: [ 81.953639] Velocity is AUTO mode
> Sep 15 02:25:25 nas dhclient: Listening on LPF/eth0/00:40:63:f5:15:76
> Sep 15 02:25:25 nas dhclient: Sending on LPF/eth0/00:40:63:f5:15:76
> Sep 15 02:25:25 nas dhclient: Sending on Socket/fallback
> Sep 15 02:25:25 nas dhclient: DHCPDISCOVER on eth0 to 255.255.255.255
> port 67 interval 3 (xid=0x4ff0e6ad)
> Sep 15 02:25:26 nas kernel: [ 83.462216] eth0: Link auto-negotiation
> speed 100M bps full duplex
> Sep 15 02:25:28 nas dhclient: DHCPDISCOVER on eth0 to 255.255.255.255
> port 67 interval 3 (xid=0x4ff0e6ad)
> Sep 15 02:25:29 nas kernel: [ 86.675203] ------------[ cut here ]------------
> Sep 15 02:25:29 nas kernel: [ 86.675227] WARNING: CPU: 0 PID: 1529 at
> /build/buildd/linux-3.11.0/kernel/softirq.c:159
> local_bh_enable+0x60/0x90()
> Sep 15 02:25:29 nas kernel: [ 86.675231] Modules linked in:
> snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep(F) snd_pcm(F)
> snd_page_alloc(F) snd_seq_midi(F) snd_seq_midi_event(F) via_cputemp
> snd_rawmidi(F) snd_seq(F) snd_seq_device(F) snd_timer(F) i2c_viapro
> psmouse(F) serio_raw(F) snd(F) soundcore(F) shpchp mac_hid hwmon_vid
> lp(F) parport(F) binfmt_misc(F) raid10(F) raid1(F) raid0(F)
> multipath(F) linear(F) dm_crypt(F) via_rng raid456(F)
> async_raid6_recov(F) async_memcpy(F) async_pq(F) async_xor(F)
> async_tx(F) xor(F) raid6_pq(F) pata_acpi padlock_sha padlock_aes
> pata_via via_velocity via_rhine mii(F) ahci(F) libahci(F) crc_ccitt(F)
> Sep 15 02:25:29 nas kernel: [ 86.675315] CPU: 0 PID: 1529 Comm:
> SpiderOak Tainted: GF 3.11.0-7-generic #13-Ubuntu
> Sep 15 02:25:29 nas kernel: [ 86.675320] Hardware name: To Be Filled
> By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080014
> 12/18/2007
> Sep 15 02:25:29 nas kernel: [ 86.675324] 00000000 00000000 ee803ce8
> c16313c4 00000000 ee803d18 c105268e c1805af4
> Sep 15 02:25:29 nas kernel: [ 86.675336] 00000000 000005f9 c1805dc8
> 0000009f c1056b50 c1056b50 c19566c0 efbafb80
> Sep 15 02:25:29 nas kernel: [ 86.675347] 00000000 ee803d28 c1052752
> 00000009 00000000 ee803d30 c1056b50 ee803d4c
> Sep 15 02:25:29 nas kernel: [ 86.675359] Call Trace:
> Sep 15 02:25:29 nas kernel: [ 86.675371] [<c16313c4>] dump_stack+0x41/0x52
> Sep 15 02:25:29 nas kernel: [ 86.675379] [<c105268e>]
> warn_slowpath_common+0x7e/0xa0
> Sep 15 02:25:29 nas kernel: [ 86.675387] [<c1056b50>] ?
> local_bh_enable+0x60/0x90
> Sep 15 02:25:29 nas kernel: [ 86.675394] [<c1056b50>] ?
> local_bh_enable+0x60/0x90
> Sep 15 02:25:29 nas kernel: [ 86.675401] [<c1052752>]
> warn_slowpath_null+0x22/0x30
> Sep 15 02:25:29 nas kernel: [ 86.675409] [<c1056b50>] local_bh_enable+0x60/0x90
> Sep 15 02:25:29 nas kernel: [ 86.675421] [<c155f1ea>] dst_alloc+0x12a/0x140
> Sep 15 02:25:29 nas kernel: [ 86.675431] [<c158189d>] rt_dst_alloc+0x4d/0x60
> Sep 15 02:25:29 nas kernel: [ 86.675440] [<c1583fdc>]
> ip_route_input_noref+0x2bc/0xa30
> Sep 15 02:25:29 nas kernel: [ 86.675448] [<c107c504>] ? resched_task+0x24/0x70
> Sep 15 02:25:29 nas kernel: [ 86.675456] [<c107cfd8>] ?
> ttwu_do_wakeup+0x18/0x100
> Sep 15 02:25:29 nas kernel: [ 86.675464] [<c1585b4b>] ip_rcv_finish+0xbb/0x340
> Sep 15 02:25:29 nas kernel: [ 86.675471] [<c1586414>] ip_rcv+0x254/0x3c0
> Sep 15 02:25:29 nas kernel: [ 86.675479] [<c1558217>]
> __netif_receive_skb_core+0x557/0x730
> Sep 15 02:25:29 nas kernel: [ 86.675487] [<c1558406>]
> __netif_receive_skb+0x16/0x60
> Sep 15 02:25:29 nas kernel: [ 86.675494] [<c155846f>]
> netif_receive_skb+0x1f/0x80
> Sep 15 02:25:29 nas kernel: [ 86.675516] [<f845e7ab>]
> velocity_rx_srv+0x2ab/0x410 [via_velocity]
> Sep 15 02:25:29 nas kernel: [ 86.675525] [<c13dfa19>] ?
> __mix_pool_bytes+0x39/0x80
> Sep 15 02:25:29 nas kernel: [ 86.675534] [<c1014790>] ?
> alternatives_enable_smp+0x110/0x110
> Sep 15 02:25:29 nas kernel: [ 86.675547] [<f84608ac>]
> velocity_poll+0x3c/0x90 [via_velocity]
> Sep 15 02:25:29 nas kernel: [ 86.675554] [<c1558725>] net_rx_action+0xf5/0x1f0
> Sep 15 02:25:29 nas kernel: [ 86.675562] [<c10573c1>] __do_softirq+0xc1/0x1d0
> Sep 15 02:25:29 nas kernel: [ 86.675574] [<c103cd90>] ?
> ack_apic_level+0x60/0x100
> Sep 15 02:25:29 nas kernel: [ 86.675584] [<c10d7100>] ?
> handle_irq_event_percpu+0x150/0x1a0
> Sep 15 02:25:29 nas kernel: [ 86.675591] [<c1057635>] irq_exit+0x95/0xa0
> Sep 15 02:25:29 nas kernel: [ 86.675602] [<c163f1f5>] do_IRQ+0x45/0xb0
> Sep 15 02:25:29 nas kernel: [ 86.675610] [<c163efb3>] common_interrupt+0x33/0x38
> Sep 15 02:25:29 nas kernel: [ 86.675616] ---[ end trace 00a91aa3f264230a ]---
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists