[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20131003112702.6f3210b0@jpm-OptiPlex-GX620>
Date: Thu, 3 Oct 2013 11:27:02 +0300
From: Jack Morgenstein <jackm@....mellanox.co.il>
To: Alexander Gordeev <agordeev@...hat.com>
Cc: linux-kernel@...r.kernel.org, Bjorn Helgaas <bhelgaas@...gle.com>,
Ralf Baechle <ralf@...ux-mips.org>,
Michael Ellerman <michael@...erman.id.au>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Martin Schwidefsky <schwidefsky@...ibm.com>,
Ingo Molnar <mingo@...hat.com>, Tejun Heo <tj@...nel.org>,
Dan Williams <dan.j.williams@...el.com>,
Andy King <acking@...are.com>, Jon Mason <jon.mason@...el.com>,
Matt Porter <mporter@...nel.crashing.org>,
linux-pci@...r.kernel.org, linux-mips@...ux-mips.org,
linuxppc-dev@...ts.ozlabs.org, linux390@...ibm.com,
linux-s390@...r.kernel.org, x86@...nel.org,
linux-ide@...r.kernel.org, iss_storagedev@...com,
linux-nvme@...ts.infradead.org, linux-rdma@...r.kernel.org,
netdev@...r.kernel.org, e1000-devel@...ts.sourceforge.net,
linux-driver@...gic.com,
Solarflare linux maintainers <linux-net-drivers@...arflare.com>,
"VMware, Inc." <pv-drivers@...are.com>, linux-scsi@...r.kernel.org,
ogerlitz@...lanox.com, eli@...lanox.com
Subject: Re: [PATCH RFC 46/77] mlx4: Update MSI/MSI-X interrupts enablement
code
On Wed, 2 Oct 2013 12:49:02 +0200
Alexander Gordeev <agordeev@...hat.com> wrote:
UPDATING THIS REPLY.
Your change log confused me. The change below is not from a "recent
re-design", it is required due to an earlier patch in this patch set.
>From the log, I assumed that the change you are talking about is already
upstream.
I will re-review.
-Jack
NACK. This change does not do anything logically as far as I can tell.
pci_enable_msix in the current upstream kernel itself calls
pci_msix_table_size. The current code yields the same resultswill
as the code suggested below. (i.e., the suggested code has no effect on
optimality).
BTW, pci_msix_table_size never returns a value < 0 (if msix is not
enabled, it returns 0 for the table size), so the (err < 0) check here
is not correct. (I also do not like using "err" here anyway for the
value returned by pci_msix_table_size(). There is no error here, and
it is simply confusing.
-Jack
> As result of recent re-design of the MSI/MSI-X interrupts enabling
> pattern this driver has to be updated to use the new technique to
> obtain a optimal number of MSI/MSI-X interrupts required.
>
> Signed-off-by: Alexander Gordeev <agordeev@...hat.com>
> ---
> drivers/net/ethernet/mellanox/mlx4/main.c | 17 ++++++++---------
> 1 files changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c
> b/drivers/net/ethernet/mellanox/mlx4/main.c index 60c9f4f..377a5ea
> 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c
> +++ b/drivers/net/ethernet/mellanox/mlx4/main.c
> @@ -1852,8 +1852,16 @@ static void mlx4_enable_msi_x(struct mlx4_dev
> *dev) int i;
>
> if (msi_x) {
> + err = pci_msix_table_size(dev->pdev);
> + if (err < 0)
> + goto no_msi;
> +
> + /* Try if at least 2 vectors are available */
> nreq = min_t(int, dev->caps.num_eqs -
> dev->caps.reserved_eqs, nreq);
> + nreq = min_t(int, nreq, err);
> + if (nreq < 2)
> + goto no_msi;
>
> entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
> if (!entries)
> @@ -1862,17 +1870,8 @@ static void mlx4_enable_msi_x(struct mlx4_dev
> *dev) for (i = 0; i < nreq; ++i)
> entries[i].entry = i;
>
> - retry:
> err = pci_enable_msix(dev->pdev, entries, nreq);
> if (err) {
> - /* Try again if at least 2 vectors are
> available */
> - if (err > 1) {
> - mlx4_info(dev, "Requested %d
> vectors, "
> - "but only %d MSI-X vectors
> available, "
> - "trying again\n", nreq,
> err);
> - nreq = err;
> - goto retry;
> - }
> kfree(entries);
> goto no_msi;
> }
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists