[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20131003201023.GC3142@tuxdriver.com>
Date: Thu, 3 Oct 2013 16:10:24 -0400
From: "John W. Linville" <linville@...driver.com>
To: davem@...emloft.net
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: pull request: wireless 2013-10-03
Dave,
Here is another batch of fixes intended for the 3.12 stream...
For the mac80211 bits, Johannes says:
"This time I have two fixes for IBSS (including one for wext, hah), a fix
for extended rates IEs, an active monitor checking fix and a sysfs
registration race fix."
On top of those...
Amitkumar Karwar brings an mwifiex fix for an interrupt loss issue
w/ SDIO devices. The problem was due to a command timeout issue
introduced by an earlier patch.
Felix Fietkau a stall in the ath9k driver. This patch fixes the
regression introduced in the commit "ath9k: use software queues for
un-aggregated data packets".
Stanislaw Gruszka reverts an rt2x00 patch that was found to cause
connection problems with some devices.
Please let me know if there are problems!
John
---
The following changes since commit 569943d0639c85a451ea853087cbd5f738247dd9:
Merge branch 'mv643xx' (2013-10-02 17:11:50 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem
for you to fetch changes up to 1eea72f03a139146f341e450cf56934b2e01a4d3:
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem (2013-10-03 16:00:03 -0400)
----------------------------------------------------------------
Amitkumar Karwar (1):
mwifiex: fix SDIO interrupt lost issue
Bruno Randolf (1):
cfg80211: fix warning when using WEXT for IBSS
Chun-Yeow Yeoh (1):
mac80211: fix the setting of extended supported rate IE
Felix Fietkau (2):
mac80211: drop spoofed packets in ad-hoc mode
ath9k: fix powersave response handling for BA session packets
Johannes Berg (1):
cfg80211: fix sysfs registration race
John W. Linville (2):
Merge branch 'for-john' of git://git.kernel.org/.../jberg/mac80211
Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem
Luciano Coelho (1):
cfg80211: use the correct macro to check for active monitor support
Stanislaw Gruszka (1):
Revert "rt2x00pci: Use PCI MSIs whenever possible"
drivers/net/wireless/ath/ath9k/xmit.c | 9 ++++++---
drivers/net/wireless/mwifiex/main.c | 6 ++++--
drivers/net/wireless/rt2x00/rt2x00pci.c | 9 +--------
net/mac80211/rx.c | 3 +++
net/mac80211/util.c | 5 +----
net/wireless/core.c | 21 +++++++++++++--------
net/wireless/ibss.c | 3 +++
net/wireless/nl80211.c | 4 ++--
8 files changed, 33 insertions(+), 27 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 5ac713d..dd30452 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1969,15 +1969,18 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
struct ath_atx_tid *tid, struct sk_buff *skb)
{
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ath_frame_info *fi = get_frame_info(skb);
struct list_head bf_head;
- struct ath_buf *bf;
-
- bf = fi->bf;
+ struct ath_buf *bf = fi->bf;
INIT_LIST_HEAD(&bf_head);
list_add_tail(&bf->list, &bf_head);
bf->bf_state.bf_type = 0;
+ if (tid && (tx_info->flags & IEEE80211_TX_CTL_AMPDU)) {
+ bf->bf_state.bf_type = BUF_AMPDU;
+ ath_tx_addto_baw(sc, tid, bf);
+ }
bf->bf_next = NULL;
bf->bf_lastbf = bf;
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index fd77833..c2b91f5 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -358,10 +358,12 @@ process_start:
}
} while (true);
- if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter))
+ spin_lock_irqsave(&adapter->main_proc_lock, flags);
+ if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter)) {
+ spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
goto process_start;
+ }
- spin_lock_irqsave(&adapter->main_proc_lock, flags);
adapter->mwifiex_processing = false;
spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 76d95de..dc49e52 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -105,13 +105,11 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
goto exit_release_regions;
}
- pci_enable_msi(pci_dev);
-
hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
if (!hw) {
rt2x00_probe_err("Failed to allocate hardware\n");
retval = -ENOMEM;
- goto exit_disable_msi;
+ goto exit_release_regions;
}
pci_set_drvdata(pci_dev, hw);
@@ -152,9 +150,6 @@ exit_free_reg:
exit_free_device:
ieee80211_free_hw(hw);
-exit_disable_msi:
- pci_disable_msi(pci_dev);
-
exit_release_regions:
pci_release_regions(pci_dev);
@@ -179,8 +174,6 @@ void rt2x00pci_remove(struct pci_dev *pci_dev)
rt2x00pci_free_reg(rt2x00dev);
ieee80211_free_hw(hw);
- pci_disable_msi(pci_dev);
-
/*
* Free the PCI device data.
*/
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 54395d7..674eac1 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3056,6 +3056,9 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx,
case NL80211_IFTYPE_ADHOC:
if (!bssid)
return 0;
+ if (ether_addr_equal(sdata->vif.addr, hdr->addr2) ||
+ ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2))
+ return 0;
if (ieee80211_is_beacon(hdr->frame_control)) {
return 1;
} else if (!ieee80211_bssid_match(bssid, sdata->u.ibss.bssid)) {
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index e1b34a1..9c3200b 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2103,7 +2103,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
- int rate, skip, shift;
+ int rate, shift;
u8 i, exrates, *pos;
u32 basic_rates = sdata->vif.bss_conf.basic_rates;
u32 rate_flags;
@@ -2131,14 +2131,11 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
pos = skb_put(skb, exrates + 2);
*pos++ = WLAN_EID_EXT_SUPP_RATES;
*pos++ = exrates;
- skip = 0;
for (i = 8; i < sband->n_bitrates; i++) {
u8 basic = 0;
if ((rate_flags & sband->bitrates[i].flags)
!= rate_flags)
continue;
- if (skip++ < 8)
- continue;
if (need_basic && basic_rates & BIT(i))
basic = 0x80;
rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 6715396..fe8d4f2 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -566,18 +566,13 @@ int wiphy_register(struct wiphy *wiphy)
/* check and set up bitrates */
ieee80211_set_bitrate_flags(wiphy);
-
+ rtnl_lock();
res = device_add(&rdev->wiphy.dev);
- if (res)
- return res;
-
- res = rfkill_register(rdev->rfkill);
if (res) {
- device_del(&rdev->wiphy.dev);
+ rtnl_unlock();
return res;
}
- rtnl_lock();
/* set up regulatory info */
wiphy_regulatory_register(wiphy);
@@ -606,6 +601,15 @@ int wiphy_register(struct wiphy *wiphy)
rdev->wiphy.registered = true;
rtnl_unlock();
+
+ res = rfkill_register(rdev->rfkill);
+ if (res) {
+ rfkill_destroy(rdev->rfkill);
+ rdev->rfkill = NULL;
+ wiphy_unregister(&rdev->wiphy);
+ return res;
+ }
+
return 0;
}
EXPORT_SYMBOL(wiphy_register);
@@ -640,7 +644,8 @@ void wiphy_unregister(struct wiphy *wiphy)
rtnl_unlock();
__count == 0; }));
- rfkill_unregister(rdev->rfkill);
+ if (rdev->rfkill)
+ rfkill_unregister(rdev->rfkill);
rtnl_lock();
rdev->wiphy.registered = false;
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index 39bff7d..403fe29 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -263,6 +263,8 @@ int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
if (chan->flags & IEEE80211_CHAN_DISABLED)
continue;
wdev->wext.ibss.chandef.chan = chan;
+ wdev->wext.ibss.chandef.center_freq1 =
+ chan->center_freq;
break;
}
@@ -347,6 +349,7 @@ int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
if (chan) {
wdev->wext.ibss.chandef.chan = chan;
wdev->wext.ibss.chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
+ wdev->wext.ibss.chandef.center_freq1 = freq;
wdev->wext.ibss.channel_fixed = true;
} else {
/* cfg80211_ibss_wext_join will pick one if needed */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index af8d84a..626dc3b 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2421,7 +2421,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
change = true;
}
- if (flags && (*flags & NL80211_MNTR_FLAG_ACTIVE) &&
+ if (flags && (*flags & MONITOR_FLAG_ACTIVE) &&
!(rdev->wiphy.features & NL80211_FEATURE_ACTIVE_MONITOR))
return -EOPNOTSUPP;
@@ -2483,7 +2483,7 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
info->attrs[NL80211_ATTR_MNTR_FLAGS] : NULL,
&flags);
- if (!err && (flags & NL80211_MNTR_FLAG_ACTIVE) &&
+ if (!err && (flags & MONITOR_FLAG_ACTIVE) &&
!(rdev->wiphy.features & NL80211_FEATURE_ACTIVE_MONITOR))
return -EOPNOTSUPP;
--
John W. Linville Someday the world will need a hero, and you
linville@...driver.com might be all we have. Be ready.
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists