| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1380983213.5187.7.camel@mattotaupa>
Date: Sat, 05 Oct 2013 16:26:53 +0200
From: Paul Menzel <paulepanter@...rs.sourceforge.net>
To: netdev@...r.kernel.org
Subject: atl2: NETDEV WATCHDOG: eth0 (atl2): transmit queue 0 timed out
Dear Linux folks,
using the ASUS Eee PC 701 4G, I experienced the first time, that I had
problems with an Ethernet connection. It was in a cooperate network
using a lot of switches and other gear I suppose. Though I do not know
the details and it should not matter. The laptop even locked up after a
while and had to be reset, but I do not have a backtrace for that.
Debian Sid/unstable is used on the system and I only now found time to
report it. Should I open a bug in Linux’ Bugzilla about that or is it
not enough information. In the latter case I do not have access to the
network anymore, so testing/debugging would be difficult.
Thanks,
Paul
Aug 20 10:50:11 myhostname kernel: [ 1029.595180] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug 20 10:51:24 myhostname kernel: [ 1103.008058] ------------[ cut here ]------------
Aug 20 10:51:24 myhostname kernel: [ 1103.008097] WARNING: at /build/linux-mt4E4Z/linux-3.10.7/net/sched/sch_generic.c:255 dev_watchdog+0xae/0x111()
Aug 20 10:51:24 myhostname kernel: [ 1103.008106] NETDEV WATCHDOG: eth0 (atl2): transmit queue 0 timed out
Aug 20 10:51:24 myhostname kernel: [ 1103.008112] Modules linked in: arc4 ath5k ath mac80211 cfg80211 cuse uinput loop fuse joydev iTCO_wdt snd_hda_codec_realtek iTCO_vendor_support mperf hid_generic snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc usb_storage snd_seq_midi snd_seq_midi_event microcode snd_rawmidi psmouse evdev serio_raw usbhid lpc_ich mfd_core hid rng_core snd_seq snd_seq_device snd_timer i915 battery snd ac video drm_kms_helper drm eeepc_laptop sparse_keymap i2c_algo_bit soundcore rfkill processor i2c_core button ext3 mbcache jbd sg sd_mod crc_t10dif ata_generic ata_piix ahci libahci libata ehci_pci uhci_hcd ehci_hcd scsi_mod usbcore usb_common atl2 thermal thermal_sys
Aug 20 10:51:24 myhostname kernel: [ 1103.008287] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10-2-686-pae #1 Debian 3.10.7-1
Aug 20 10:51:24 myhostname kernel: [ 1103.008295] Hardware name: ASUSTeK Computer INC. 701/701, BIOS 0801 01/08/2008
Aug 20 10:51:24 myhostname kernel: [ 1103.008303] 00000000 c102ff24 c1269f93 dc1a4800 00000000 00031030 dc1a4a28 c102ff9f
Aug 20 10:51:24 myhostname kernel: [ 1103.008321] 00000009 c1437eac c13fbfb6 c1437ec4 c1269f93 c13fbfef 000000ff c13fbfb6
Aug 20 10:51:24 myhostname kernel: [ 1103.008338] dc1a4800 dffc45b8 00000000 c1530840 00000100 c1269ee5 c1039ee5 c1530840
Aug 20 10:51:24 myhostname kernel: [ 1103.008356] Call Trace:
Aug 20 10:51:24 myhostname kernel: [ 1103.008375] [<c102ff24>] ? warn_slowpath_common+0x4d/0x60
Aug 20 10:51:24 myhostname kernel: [ 1103.008387] [<c1269f93>] ? dev_watchdog+0xae/0x111
Aug 20 10:51:24 myhostname kernel: [ 1103.008400] [<c102ff9f>] ? warn_slowpath_fmt+0x29/0x2d
Aug 20 10:51:24 myhostname kernel: [ 1103.008411] [<c1269f93>] ? dev_watchdog+0xae/0x111
Aug 20 10:51:24 myhostname kernel: [ 1103.008429] [<c1269ee5>] ? netif_tx_lock+0x5d/0x5d
Aug 20 10:51:24 myhostname kernel: [ 1103.008443] [<c1039ee5>] ? call_timer_fn+0x37/0xb7
Aug 20 10:51:24 myhostname kernel: [ 1103.008454] [<c1269ee5>] ? netif_tx_lock+0x5d/0x5d
Aug 20 10:51:24 myhostname kernel: [ 1103.008465] [<c103ac3e>] ? run_timer_softirq+0x15d/0x198
Aug 20 10:51:24 myhostname kernel: [ 1103.008477] [<c1035d42>] ? __do_softirq+0xc2/0x1be
Aug 20 10:51:24 myhostname kernel: [ 1103.008488] [<c1035ef1>] ? irq_exit+0x37/0x6f
Aug 20 10:51:24 myhostname kernel: [ 1103.008502] [<c100acef>] ? do_IRQ+0x65/0x76
Aug 20 10:51:24 myhostname kernel: [ 1103.008517] [<c12fff73>] ? common_interrupt+0x33/0x38
Aug 20 10:51:24 myhostname kernel: [ 1103.008533] [<c10600d8>] ? swsusp_write+0x203/0x3b1
Aug 20 10:51:24 myhostname kernel: [ 1103.008547] [<c123eba1>] ? arch_local_irq_enable+0x2/0x7
Aug 20 10:51:24 myhostname kernel: [ 1103.008559] [<c123ef00>] ? cpuidle_enter_state+0x45/0xac
Aug 20 10:51:24 myhostname kernel: [ 1103.008575] [<c123f012>] ? cpuidle_idle_call+0xab/0x10b
Aug 20 10:51:24 myhostname kernel: [ 1103.008588] [<c100eff3>] ? arch_cpu_idle+0x5/0x15
Aug 20 10:51:24 myhostname kernel: [ 1103.008600] [<c1060ce2>] ? cpu_startup_entry+0xff/0x17a
Aug 20 10:51:24 myhostname kernel: [ 1103.008613] [<c1489965>] ? start_kernel+0x356/0x35b
Aug 20 10:51:24 myhostname kernel: [ 1103.008620] ---[ end trace 28eba493396f44b7 ]---
Aug 20 10:51:25 myhostname kernel: [ 1103.024326] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
Aug 20 10:51:25 myhostname kernel: [ 1103.646328] eth0: txs packet size not consistent with txd txd_:0x06707474, txs_:0x0001004b!
Aug 20 10:51:25 myhostname kernel: [ 1103.646340] txd read ptr: 0x54
Aug 20 10:51:25 myhostname kernel: [ 1103.646346] txs-behind:0x8001004b
Aug 20 10:51:25 myhostname kernel: [ 1103.646351] txs-before:0x0001004d
Aug 20 10:51:25 myhostname kernel: [ 1103.646359] eth0: txs packet size not consistent with txd txd_:0x01400001, txs_:0x0001004b!
Aug 20 10:51:25 myhostname kernel: [ 1103.646365] txd read ptr: 0x4cc
Aug 20 10:51:25 myhostname kernel: [ 1103.646370] txs-behind:0x8001004d
Aug 20 10:51:25 myhostname kernel: [ 1103.646375] txs-before:0x0001004b
Aug 20 10:51:25 myhostname kernel: [ 1103.646383] eth0: txs packet size not consistent with txd txd_:0x070c0000, txs_:0x0001004d!
Aug 20 10:51:25 myhostname kernel: [ 1103.646388] txd read ptr: 0x4d4
Aug 20 10:51:25 myhostname kernel: [ 1103.646394] txs-behind:0x8001004d
Aug 20 10:51:25 myhostname kernel: [ 1103.646399] txs-before:0x0001004b
Aug 20 10:51:25 myhostname kernel: [ 1103.646406] eth0: txs packet size not consistent with txd txd_:0x1f0001ac, txs_:0x0001004d!
Aug 20 10:51:25 myhostname kernel: [ 1103.646412] txd read ptr: 0x4d8
Aug 20 10:51:25 myhostname kernel: [ 1103.646417] txs-behind:0x0001017b
Aug 20 10:51:25 myhostname kernel: [ 1103.646422] txs-before:0x0001004d
Aug 20 10:51:35 myhostname kernel: [ 1113.024274] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
Aug 20 10:51:35 myhostname kernel: [ 1113.032039] eth0: txs packet size not consistent with txd txd_:0x1f0001ac, txs_:0x0003002a!
Aug 20 10:51:35 myhostname kernel: [ 1113.032051] txd read ptr: 0xe0
Aug 20 10:51:35 myhostname kernel: [ 1113.032056] txs-behind:0x8001004d
Aug 20 10:51:35 myhostname kernel: [ 1113.032062] txs-before:0x00010069
Aug 20 10:51:35 myhostname kernel: [ 1113.032070] eth0: txs packet size not consistent with txd txd_:0x6f673278, txs_:0x0001004d!
Aug 20 10:51:35 myhostname kernel: [ 1113.032075] txd read ptr: 0x290
Aug 20 10:51:35 myhostname kernel: [ 1113.032081] txs-behind:0x0001004d
Aug 20 10:51:35 myhostname kernel: [ 1113.032086] txs-before:0x0003002a
Aug 20 10:51:45 myhostname kernel: [ 1123.024250] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
Aug 20 10:51:53 myhostname kernel: [ 1131.469794] eth0: txs packet size not consistent with txd txd_:0x11400040, txs_:0x00010042!
Aug 20 10:51:53 myhostname kernel: [ 1131.469808] txd read ptr: 0x2b8
Aug 20 10:51:53 myhostname kernel: [ 1131.469813] txs-behind:0x80010042x
-- Package-specific info:
** Version:
Linux version 3.10-2-686-pae (debian-kernel@...ts.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.7-1 (2013-08-17)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-2-686-pae root=UUID=b33ef3d8-b6d8-481d-a9a3-0050047ab9b9 ro quiet noisapnp pcie_aspm=force
** Not tainted
** Kernel log:
[ 2.519556] kjournald starting. Commit interval 5 seconds
[ 2.519625] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 2.621524] usb 2-5: New USB device found, idVendor=0951, idProduct=1606
[ 2.621541] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 2.621551] usb 2-5: Product: UB6225
[ 2.621560] usb 2-5: Manufacturer: ENE
[ 2.621569] usb 2-5: SerialNumber: 146030377350
[ 3.116128] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 3.292705] usb 3-1: New USB device found, idVendor=03f0, idProduct=0024
[ 3.292722] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.292733] usb 3-1: Product: HP Basic USB Keyboard
[ 3.292742] usb 3-1: Manufacturer: CHICONY
[ 3.536162] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[ 3.704681] usb 3-2: New USB device found, idVendor=0461, idProduct=4dfb
[ 3.704697] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.704708] usb 3-2: Product: USB Optical Mouse
[ 7.620912] udevd[336]: starting version 175
[ 8.071184] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 8.071793] tsc: Marking TSC unstable due to TSC halts in idle
[ 8.071840] ACPI: acpi_idle registered with cpuidle
[ 8.075548] ACPI: Lid Switch [LID]
[ 8.075874] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 8.075897] ACPI: Sleep Button [SLPB]
[ 8.076465] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.076485] ACPI: Power Button [PWRB]
[ 8.092522] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.092545] ACPI: Power Button [PWRF]
[ 8.094858] Switching to clocksource hpet
[ 8.189205] eeepc_laptop: Eee PC Hotkey Driver
[ 8.189223] eeepc_laptop: model 701 does not officially support setting cpu speed
[ 8.189229] eeepc_laptop: cpufv disabled to avoid instability
[ 8.189248] eeepc_laptop: Hotkey init flags 0x41
[ 8.190282] eeepc_laptop: Get control methods supported: 0x101711
[ 8.208768] [drm] Initialized drm 1.1.0 20060810
[ 8.272853] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.273092] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 8.537444] [drm] Memory usable by graphics device = 256M
[ 8.537474] i915 0000:00:02.0: setting latency timer to 64
[ 8.538552] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.538563] [drm] Driver supports precise vblank timestamp query.
[ 8.539682] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.556115] usb 2-8: new high-speed USB device number 5 using ehci-pci
[ 8.592761] intel_rng: FWH not detected
[ 8.603673] [drm] initialized overlay support
[ 8.610419] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.677897] usbcore: registered new interface driver usbhid
[ 8.677908] usbhid: USB HID core driver
[ 8.744099] usb 2-8: New USB device found, idVendor=eb1a, idProduct=2761
[ 8.744116] usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.856698] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 8.978580] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 9.025880] fbcon: inteldrmfb (fb0) is primary device
[ 9.041389] scsi2 : usb-storage 2-5:1.0
[ 9.041870] usbcore: registered new interface driver usb-storage
[ 9.351807] ACPI: Battery Slot [BAT0] (battery present)
[ 9.352224] ACPI: AC Adapter [AC0] (on-line)
[ 9.412154] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6
[ 9.413969] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.1-1/input0
[ 9.415362] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
[ 9.425070] hid-generic 0003:0461:4DFB.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 9.433381] platform microcode: firmware: agent aborted loading intel-ucode/06-0d-08 (not found?)
[ 9.433677] microcode: Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter Oruba
[ 10.040976] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 10.044207] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 10.047213] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 10.088176] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 409168
[ 10.172072] Console: switching to colour frame buffer device 100x30
[ 10.191916] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.191923] i915 0000:00:02.0: registered panic notifier
[ 10.199429] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.199770] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[ 10.199794] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \_SB_.PCI0.SBRG.PMS0 2 (20130328/utaddress-251)
[ 10.199813] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.199824] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130328/utaddress-251)
[ 10.199843] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.199850] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130328/utaddress-251)
[ 10.199868] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.199876] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.252346] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 10.253329] iTCO_vendor_support: vendor-support=0
[ 10.267503] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 10.271947] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 10.272193] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
[ 10.272550] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.285533] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input8
[ 10.335377] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 10.342031] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.342647] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.505827] eeepc_laptop: BIOS says wireless lan is blocked, but the pci device is present
[ 10.505841] eeepc_laptop: skipped wireless hotplug as probably inappropriate for this model
[ 10.506749] eeepc_laptop: Unable to find port
[ 11.403955] EXT3-fs (sda1): using internal journal
[ 12.193337] fuse init (API version 7.22)
[ 12.289773] loop: module loaded
[ 15.619754] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 17.283499] CUSE: failed to register chrdev region
[ 18.941624] atl2 0000:03:00.0: irq 44 for MSI/MSI-X
[ 18.941794] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 29.181783] eeepc_laptop: Unknown key 2b pressed
[ 29.252726] eeepc_laptop: Unknown key 2e pressed
** Model information
not available
** Loaded modules:
cuse
uinput
loop
fuse
snd_hda_codec_realtek
joydev
iTCO_wdt
iTCO_vendor_support
mperf
hid_generic
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
usb_storage
snd_seq_midi
snd_seq_midi_event
microcode
snd_rawmidi
psmouse
evdev
serio_raw
snd_seq
lpc_ich
usbhid
mfd_core
hid
rng_core
snd_seq_device
snd_timer
i915
ac
battery
video
snd
drm_kms_helper
eeepc_laptop
sparse_keymap
drm
rfkill
i2c_algo_bit
soundcore
button
processor
i2c_core
ext3
mbcache
jbd
sg
sd_mod
crc_t10dif
ata_generic
ata_piix
ahci
libahci
libata
ehci_pci
uhci_hcd
ehci_hcd
scsi_mod
usbcore
usb_common
atl2
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 1f900000-1fafffff
Prefetchable memory behind bridge: 000000001fb00000-000000001fcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 000000001fd00000-000000001fefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0400 [size=32]
03:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L2 Fast Ethernet [1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fbfa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl2
** USB devices:
Bus 002 Device 005: ID eb1a:2761 eMPIA Technology, Inc. EeePC 701 integrated Webcam
Bus 002 Device 004: ID 0951:1606 Kingston Technology Eee PC 701 SD Card Reader [ENE UB6225]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 0461:4dfb Primax Electronics, Ltd
Bus 003 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.10-2-686-pae (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-2-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.17-92
Versions of packages linux-image-3.10-2-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-17
pn linux-doc-3.10 <none>
Versions of packages linux-image-3.10-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
Download attachment "signature.asc" of type "application/pgp-signature" (199 bytes)
Powered by blists - more mailing lists