lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Mon,  7 Oct 2013 17:00:42 +0900
From:	Simon Horman <>
	Jesse Gross <>, Ben Pfaff <>
Cc:	Pravin B Shelar <>, Ravi K <>,
	Isaku Yamahata <>,
	Joe Stringer <>
Subject: [PATCH v2.43 0/5] MPLS actions and matches


This series implements MPLS actions and matches based on work by
Ravi K, Leo Alterman, Yamahata-san and Joe Stringer.

This series provides two changes

* Patches 1 - 3

  Provide user-space support for the VLAN/MPLS tag insertion order
  up to and including OpenFlow 1.2, and the different ordering
  specified from OpenFlow 1.3. In a nutshell the datapath always
  uses the OpenFlow 1.3 ordering, which is to always insert tags
  immediately after the L2 header, regardless of the presence of other
  tags. And ovs-vswtichd provides compatibility for the behaviour up
  to OpenFlow 1.2, which is that MPLS tags should follow VLAN tags
  if present.

  These patches have been updated since v2.42.

  Ben, these are for you to review.

* Patches 4 and 5

  Adding basic MPLS action and match support to the kernel datapath

  These patches were last updated in v2.41.

  Jesse, these are for you to review.

Differences between v2.43 and v2.42:

* As suggested by Ben Pfaff
  Move vlan state into struct xlate_ctx
  1. Add final_vlan_tci member to struct xlate_ctx instead of vlan_tci member
     struct xlate_xin.  This seems to be a better palace for it as it does
     not need to be accessible from the caller.
  2. Move local vlan_tci variable of do_xlate_actions() to be the
     next_vlan_tci member of strict xlate_ctx.  This allows for it to work
     across resubmit actions and goto table instructions.
* Code contributed by Ben Pfaff
  + Use enum for to control order of MPLS LSE insertion
    This makes the logic somewhat clearer
* Add a helper push_mpls_from_openflow() to consolidate
  the same logic that appears in three locations.

Differences between v2.42 and v2.41:

* Rebase for:
  + 0585f7a ("datapath: Simplify mega-flow APIs.")
  + a097c0b ("datapath: Restructure datapath.c and flow.c")
* As suggested by Jesse Gross
  + Take into account that push_mpls() will have freed the skb on error
  + Remove dubious !eth_p_mpls(skb->protocol) condition from push_mpls
    The !eth_p_mpls(skb->protocol) condition on setting inner_protocol
    has no effect. Its motivation was to ensure that inner_protocol was
    only set the first time that mpls_push occured. However this is already
    ensured by the !ovs_skb_get_inner_protocol(skb) condition.
  + Return -EINVAL instead of -ENOMEM from pop_mpls() if the skb is too short
  + Do not add @inner_protocol to kernel doc for struct ovs_skb_cb.
    The patch no longer adds an inner_protocol member to struct ovs_skb_cb
  + Do not add and set otherwise unsued inner_protocol variable in
* As suggested by Pravin Shelar
  + Implement compatibility code in existing rpl_skb_gso_segment
    rather than introducing to use rpl___skb_gso_segment

Differences between v2.41 and v2.40:

* As suggested by Ben Pfaff
  + Expand struct ofpact_reg_load to include a mpls_before_vlan field
    rather than using the compat field of the ofpact field of
    struct ofpact_reg_load.
  + Pass version to  ofpacts_pull_openflow11_actions and
    ofpacts_pull_openflow11_instructions.  This removes the invalid
    assumption that that these functions are passed a full message and are
    thus able to deduce the OpenFlow version.

Differences between v2.40 and v2.39:

* Rebase for:
  + New dev_queue_xmit compat code
  + Updated put_vlan()
  + Removal of mpls_depth field from struct flow
* As suggested by Jesse Gross
  + Remove bogus mac_len update from push_mpls()
  + Slightly simplify push_mpls() by using eth_hdr()
  + Remove dubious condition !eth_p_mpls(inner_protocol) on
    an skb being considered to be MPLS in netdev_send()
  + Only use compatibility code for MPLS GSO segmentation on kernels
    older than 3.11
  + Revamp setting of inner_protocol
    1. Do not unconditionally set inner_protocol to the value of
       skb->protocol in ovs_execute_actions().
    2. Initialise inner_protocol it to zero only if compatibility code is in
       use. In the case where compatibility code is not in use it will either
       be zero due since the allocation of the skb or some other value set
       by some other user.
    3. Conditionally set the inner_protocol in push_mpls() to the value of
       skb->protocol when entering push_mpls(). The condition is that
       inner_protocol is zero and the value of skb->protocol is not an MPLS
       ethernet type.
    - This new scheme:
      + Pushes logic to set inner_protocol closer to the case where it is
      + Avoids over-writing values set by other users.
* As suggested by Pravin Shelar
  + Only set and restore skb->protocol in rpl___skb_gso_segment() in the
    case of MPLS
  + Add inner_protocol field to struct ovs_gso_cb instead of ovs_skb_cb.
    This moves compatibility code closer to where it is used
    and creates fewer differences with mainline.
* Update comment on mac_len updates in datapath/actions.c
* Remove HAVE_INNER_PROCOTOL and instead just check
  against kernel version 3.11 directly.
  HAVE_INNER_PROCOTOL is a hang-over from work done prior
  to the merge of inner_protocol into the kernel.
* Remove dubious condition !eth_p_mpls(inner_protocol) on
  using inner_protocol as the type in rpl_skb_network_protocol()
* Do not update type of features in rpl_dev_queue_xmit.
  Though arguably correct this is not an inherent part of
  the changes made by this patch.
* Use skb_cow_head() in push_mpls()
  + Call skb_cow_head(skb, MPLS_HLEN) instead of
    make_writable(skb, skb->mac_len) to ensure that there is enough head
    room to push an MPLS LSE regardless of whether the skb is cloned or not.
  + This is consistent with the behaviour of rpl__vlan_put_tag().
  + This is a fix for crashes reported when performing mpls_push
    with headroom less than 4. This problem was introduced in v3.36.
* Skip popping in mpls_pop if the skb is too short to contain an MPLS LSE

Differences between v2.39 and v2.38:

* Rebase for removal of vlan, checksum and skb->mark compat code
  - This includes adding adding a new patch,
    "[PATCH v2.39 6/7] datapath: Break out deacceleration portion of
    vlan_push" to allow re-use of some existing code.

Differences between v2.38 and v2.37:

* Rebase for SCTP support
* Refactor validate_tp_port() to iterate over eth_types rather
  than open-coding the loop. With the addition of SCTP this logic
  is now used three times.

Differences between v2.37 and v2.36:

* Rebase

Differences between v2.36 and v2.35:

* Rebase

* Do not add set_ethertype() to datapath/actions.c.
  As this patch has evolved this function had devolved into
  to sets of functionality wrapped into a single function with
  only one line of common code. Refactor things to simply
  open-code setting the ether type in the two locations where
  set_ethertype() was previously used. The aim here is to improve

* Update setting skb->ethertype after mpls push and pop.
  - In the case of push_mpls it should be set unconditionally
    as in v2.35 the behaviour of this function to always push
    an MPLS LSE before any VLAN tags.
  - In the case of mpls_pop eth_p_mpls(skb->protocol) is a better
    test than skb->protocol != htons(ETH_P_8021Q) as it will give the
    correct behaviour in the presence of other VLAN ethernet types,
    for example 0x88a8 which is used by 802.1ad. Moreover, it seems
    correct to update the ethernet type if it was previously set
    according to the top-most MPLS LSE.

* Deaccelerate VLANs when pushing MPLS tags the
  - Since v2.35 MPLS push will insert an MPLS LSE before any VLAN tags.
    This means that if an accelerated tag is present it should be
    deaccelerated to ensure it ends up in the correct position.

* Update skb->mac_len in push_mpls() so that it will be correct
  when used by a subsequent call to pop_mpls().

  As things stand I do not believe this is strictly necessary as
  ovs-vswitchd will not send a pop MPLS action after a push MPLS action.
  However, I have added this in order to code more defensively as I believe
  that if such a sequence did occur it would be rather unobvious why
  it didn't work.

* Do not add skb_cow_head() call in push_mpls().
  It is unnecessary as there is a make_writable() call.
  This change was also made in v2.30 but some how the
  code regressed between then and v2.35.

Differences between v2.35 and v2.34:

* Add support for the tag ordering specified up until OpenFlow 1.2 and
  the ordering specified from OpenFlow 1.3.

* Correct error in datapath patch's handling of GSO in the presence
  of MPLS and absence of VLANs.

To aid review this series is available in git at:

git:// devel/mpls-v2.43

Patch list and overall diffstat:

Joe Stringer (3):
  odp: Allow VLAN actions after MPLS actions
  ofp-actions: Add separate OpenFlow 1.3 action parser
  lib: Support pushing of MPLS LSE before or after VLAN tag

Simon Horman (2):
  datapath: Break out deacceleration portion of vlan_push
  datapath: Add basic MPLS support to kernel

 datapath/                             |   1 +
 datapath/actions.c                              | 158 ++++++++-
 datapath/datapath.c                             |   4 +-
 datapath/flow.c                                 |  29 ++
 datapath/flow.h                                 |  17 +-
 datapath/flow_netlink.c                         | 286 +++++++++++++--
 datapath/flow_netlink.h                         |   2 +-
 datapath/linux/compat/gso.c                     |  70 +++-
 datapath/linux/compat/gso.h                     |  41 +++
 datapath/linux/compat/include/linux/netdevice.h |   6 +-
 datapath/linux/compat/netdevice.c               |  10 +-
 datapath/mpls.h                                 |  15 +
 include/linux/openvswitch.h                     |   7 +-
 lib/flow.c                                      |   2 +-
 lib/odp-util.c                                  |   9 +-
 lib/odp-util.h                                  |   2 +-
 lib/ofp-actions.c                               |  91 ++++-
 lib/ofp-actions.h                               |  16 +
 lib/ofp-print.c                                 |   2 +-
 lib/ofp-util.c                                  |  24 +-
 lib/ofp-util.h                                  |   2 +-
 lib/packets.c                                   |  10 +-
 lib/packets.h                                   |   2 +-
 ofproto/ofproto-dpif-xlate.c                    | 132 +++++--
 tests/                           | 446 ++++++++++++++++++++++++
 utilities/ovs-ofctl.c                           |   8 +-
 26 files changed, 1272 insertions(+), 120 deletions(-)
 create mode 100644 datapath/mpls.h
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to
More majordomo info at

Powered by blists - more mailing lists