lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1381795140-10792-6-git-send-email-soren.brinkmann@xilinx.com>
Date:	Mon, 14 Oct 2013 16:59:00 -0700
From:	Soren Brinkmann <soren.brinkmann@...inx.com>
To:	Nicolas Ferre <nicolas.ferre@...el.com>
Cc:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	Michal Simek <michal.simek@...inx.com>,
	Soren Brinkmann <soren.brinkmann@...inx.com>
Subject: [PATCH RFC 5/5] net: macb: Adjust tx_clk when link speed changes

Adjust the ethernet clock according to the negotiated link speed.

Signed-off-by: Soren Brinkmann <soren.brinkmann@...inx.com>
---
 drivers/net/ethernet/cadence/macb.c | 66 +++++++++++++++++++++++++++++++++++++
 drivers/net/ethernet/cadence/macb.h |  1 +
 2 files changed, 67 insertions(+)

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 603844b1d483..beb9fa863811 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -204,6 +204,49 @@ static int macb_mdio_reset(struct mii_bus *bus)
 	return 0;
 }
 
+/**
+ * macb_set_tx_clk() - Set a clock to a new frequency
+ * @clk		Pointer to the clock to change
+ * @rate	New frequency in Hz
+ * @dev		Pointer to the struct net_device
+ */
+static void macb_set_tx_clk(struct clk *clk, int speed, struct net_device *dev)
+{
+	long ferr;
+	long rate;
+	long rate_rounded;
+
+	switch (speed) {
+	case SPEED_10:
+		rate = 2500000;
+		break;
+	case SPEED_100:
+		rate = 25000000;
+		break;
+	case SPEED_1000:
+		rate = 125000000;
+		break;
+	default:
+		break;
+	}
+
+	rate_rounded = clk_round_rate(clk, rate);
+	if (rate_rounded < 0)
+		return;
+
+	/* RGMII allows 50 ppm frequency error. Test and warn if this limit
+	 * are not satisfied.
+	 */
+	ferr = abs(rate_rounded - rate);
+	ferr = DIV_ROUND_UP(ferr, rate / 100000);
+	if (ferr > 5)
+		netdev_warn(dev, "unable to generate target frequency: %ld Hz\n",
+				rate);
+
+	if (clk_set_rate(clk, rate_rounded))
+		netdev_err(dev, "adjusting tx_clk failed.\n");
+}
+
 static void macb_handle_link_change(struct net_device *dev)
 {
 	struct macb *bp = netdev_priv(dev);
@@ -251,6 +294,9 @@ static void macb_handle_link_change(struct net_device *dev)
 
 	spin_unlock_irqrestore(&bp->lock, flags);
 
+	if (!IS_ERR(bp->tx_clk))
+		macb_set_tx_clk(bp->tx_clk, phydev->speed, dev);
+
 	if (status_change) {
 		if (phydev->link) {
 			netif_carrier_on(dev);
@@ -1805,6 +1851,8 @@ static int __init macb_probe(struct platform_device *pdev)
 		goto err_out_free_dev;
 	}
 
+	bp->tx_clk = devm_clk_get(&pdev->dev, "tx_clk");
+
 	err = clk_prepare_enable(bp->pclk);
 	if (err) {
 		dev_err(&pdev->dev, "failed to enable pclk (%u)\n", err);
@@ -1817,6 +1865,15 @@ static int __init macb_probe(struct platform_device *pdev)
 		goto err_out_disable_pclk;
 	}
 
+	if (!IS_ERR(bp->tx_clk)) {
+		err = clk_prepare_enable(bp->tx_clk);
+		if (err) {
+			dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n",
+					err);
+			goto err_out_disable_hclk;
+		}
+	}
+
 	bp->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
 	if (!bp->regs) {
 		dev_err(&pdev->dev, "failed to map registers, aborting.\n");
@@ -1917,6 +1974,9 @@ static int __init macb_probe(struct platform_device *pdev)
 err_out_unregister_netdev:
 	unregister_netdev(dev);
 err_out_disable_clocks:
+	if (!IS_ERR(bp->tx_clk))
+		clk_disable_unprepare(bp->tx_clk);
+err_out_disable_hclk:
 	clk_disable_unprepare(bp->hclk);
 err_out_disable_pclk:
 	clk_disable_unprepare(bp->pclk);
@@ -1941,6 +2001,8 @@ static int __exit macb_remove(struct platform_device *pdev)
 		kfree(bp->mii_bus->irq);
 		mdiobus_free(bp->mii_bus);
 		unregister_netdev(dev);
+		if (!IS_ERR(bp->tx_clk))
+			clk_disable_unprepare(bp->tx_clk);
 		clk_disable_unprepare(bp->hclk);
 		clk_disable_unprepare(bp->pclk);
 		free_netdev(dev);
@@ -1959,6 +2021,8 @@ static int macb_suspend(struct device *dev)
 	netif_carrier_off(netdev);
 	netif_device_detach(netdev);
 
+	if (!IS_ERR(bp->tx_clk))
+		clk_disable_unprepare(bp->tx_clk);
 	clk_disable_unprepare(bp->hclk);
 	clk_disable_unprepare(bp->pclk);
 
@@ -1973,6 +2037,8 @@ static int macb_resume(struct device *dev)
 
 	clk_prepare_enable(bp->pclk);
 	clk_prepare_enable(bp->hclk);
+	if (!IS_ERR(bp->tx_clk))
+		clk_prepare_enable(bp->tx_clk);
 
 	netif_device_attach(netdev);
 
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index f4076155bed7..51c02442160a 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -572,6 +572,7 @@ struct macb {
 	struct platform_device	*pdev;
 	struct clk		*pclk;
 	struct clk		*hclk;
+	struct clk		*tx_clk;
 	struct net_device	*dev;
 	struct napi_struct	napi;
 	struct work_struct	tx_error_task;
-- 
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ