[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1382296991-20289-2-git-send-email-milky-kernel@mcmilk.de>
Date: Sun, 20 Oct 2013 21:23:05 +0200
From: Tino Reichardt <milky-kernel@...ilk.de>
To: netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
Joe Perches <joe@...ches.com>, Jiri Pirko <jiri@...nulli.us>,
Bill Pemberton <wfp5p@...ginia.edu>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: [PATCH net-next v3 01/07] 8139too: Support for byte queue limits
Changes to 8139too driver to use byte queue limits.
Signed-off-by: Tino Reichardt <milky-kernel@...ilk.de>
---
drivers/net/ethernet/realtek/8139too.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index 3ccedeb..c17c12f 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -160,6 +160,8 @@ static int multicast_filter_limit = 32;
/* bitmapped message enable number */
static int debug = -1;
+static bool bql_disable;
+
/*
* Receive ring size
* Warning: 64K ring has hardware issues and may lock up.
@@ -626,10 +628,12 @@ module_param(multicast_filter_limit, int, 0);
module_param_array(media, int, NULL, 0);
module_param_array(full_duplex, int, NULL, 0);
module_param(debug, int, 0);
-MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
-MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
-MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
-MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+module_param(bql_disable, bool, 0);
+MODULE_PARM_DESC(debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC(multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC(media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC(full_duplex, "8139too: Force full duplex for board(s) (1)");
+MODULE_PARM_DESC(bql_disable, "8139too: Disable Byte Queue Limits functionality (default: false)");
static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
static int rtl8139_open (struct net_device *dev);
@@ -1409,6 +1413,8 @@ static void rtl8139_hw_start (struct net_device *dev)
}
netdev_dbg(dev, "init buffer addresses\n");
+ if (unlikely(bql_disable))
+ netdev_reset_queue(dev);
/* Lock Config[01234] and BMCR register writes */
RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1639,6 +1645,9 @@ static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
tp->cur_tx = 0;
tp->dirty_tx = 0;
+ if (unlikely(bql_disable))
+ netdev_reset_queue(tp->dev);
+
/* XXX account for unsent Tx packets in tp->stats.tx_dropped */
}
@@ -1729,10 +1738,13 @@ static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
* to make sure that the device sees the updated data.
*/
wmb();
+ len = max_t(unsigned int, len, (unsigned int)ETH_ZLEN);
RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
- tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+ tp->tx_flag | len);
tp->cur_tx++;
+ if (unlikely(bql_disable))
+ netdev_sent_queue(dev, len);
if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
netif_stop_queue (dev);
@@ -1750,6 +1762,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
void __iomem *ioaddr)
{
unsigned long dirty_tx, tx_left;
+ unsigned bytes_compl = 0, pkts_compl = 0;
assert (dev != NULL);
assert (ioaddr != NULL);
@@ -1792,6 +1805,8 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
u64_stats_update_begin(&tp->tx_stats.syncp);
tp->tx_stats.packets++;
tp->tx_stats.bytes += txstatus & 0x7ff;
+ pkts_compl++;
+ bytes_compl += txstatus & 0x7ff;
u64_stats_update_end(&tp->tx_stats.syncp);
}
@@ -1807,6 +1822,9 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
}
#endif /* RTL8139_NDEBUG */
+ if (unlikely(bql_disable))
+ netdev_completed_queue(dev, pkts_compl, bytes_compl);
+
/* only wake the queue if we did work, and the queue is stopped */
if (tp->dirty_tx != dirty_tx) {
tp->dirty_tx = dirty_tx;
--
1.8.4.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists