netdev - [net-next 08/11] ixgbe: fix rx-usecs range checks for BQL

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 24 Oct 2013 08:27:35 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Emil Tantilov <emil.s.tantilov@...el.com>, netdev@...r.kernel.org,
	gospo@...hat.com, sassmann@...hat.com,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 08/11] ixgbe: fix rx-usecs range checks for BQL

From: Emil Tantilov <emil.s.tantilov@...el.com>

This patch resolves an issue where the logic used to detect changes in rx-usecs
was incorrect and was masked by the call to ixgbe_update_rsc().

Setting rx-usecs between 0,2-9 and 1,10 and up requires a reset to allow
ixgbe_configure_tx_ring() to set the correct value for TXDCTL.WTHRESH in
order to avoid Tx hangs with BQL enabled.

Signed-off-by: Emil Tantilov <emil.s.tantilov@...el.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 90aac31..4e7c9b0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2257,13 +2257,13 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 
 #if IS_ENABLED(CONFIG_BQL)
 	/* detect ITR changes that require update of TXDCTL.WTHRESH */
-	if ((adapter->tx_itr_setting > 1) &&
+	if ((adapter->tx_itr_setting != 1) &&
 	    (adapter->tx_itr_setting < IXGBE_100K_ITR)) {
 		if ((tx_itr_prev == 1) ||
-		    (tx_itr_prev > IXGBE_100K_ITR))
+		    (tx_itr_prev >= IXGBE_100K_ITR))
 			need_reset = true;
 	} else {
-		if ((tx_itr_prev > 1) &&
+		if ((tx_itr_prev != 1) &&
 		    (tx_itr_prev < IXGBE_100K_ITR))
 			need_reset = true;
 	}
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html