| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1382711684-17080-1-git-send-email-horms@verge.net.au>
Date: Fri, 25 Oct 2013 15:34:40 +0100
From: Simon Horman <horms@...ge.net.au>
To: dev@...nvswitch.org, netdev@...r.kernel.org,
Jesse Gross <jesse@...ira.com>, Ben Pfaff <blp@...ira.com>
Cc: Pravin B Shelar <pshelar@...ira.com>, Ravi K <rkerur@...il.com>,
Isaku Yamahata <yamahata@...inux.co.jp>,
Joe Stringer <joe@...d.net.nz>
Subject: [PATCH v2.45 0/4] MPLS actions and matches
Hi,
This series implements MPLS actions and matches based on work by
Ravi K, Leo Alterman, Yamahata-san and Joe Stringer.
This series provides two changes
* Patches 1 - 2
Provide user-space support for the VLAN/MPLS tag insertion order
up to and including OpenFlow 1.2, and the different ordering
specified from OpenFlow 1.3. In a nutshell the datapath always
uses the OpenFlow 1.3 ordering, which is to always insert tags
immediately after the L2 header, regardless of the presence of other
tags. And ovs-vswtichd provides compatibility for the behaviour up
to OpenFlow 1.2, which is that MPLS tags should follow VLAN tags
if present.
Patch 1 and 2 have been updated since v3.44.
Ben, these are for you to review.
* Patches 3 and 4
Adding basic MPLS action and match support to the kernel datapath
These patches were last updated in v2.41.
Jesse, these are for you to review after patches 1 and 2 are
reviewed.
Difference between v2.45 and v2.44:
* As pointed out by Ben Pfaff and Joe Stringer
+ Update VLAN handling in the presence of MPLS push
Previously the test for committing ODP VLAN actions after MPLS actions
was that the VLAN TCI differed before and after the MPLS push action.
This results in a false negative in some cases including if a VLAN tag
is pushed after the MPLS push action in such a way that it duplicates
the VLAN tag present before the MPLS push action.
This is resolved by ensuring the VLAN_CFI bit of the value used to
track the desired VLAN TCI after an MPLS push action is zero unless
VLAN actions should be committed after MPLS actions.
+ Update tests to use ovs-ofctl monitor "-m" to allow full inspection of
MPLS LSE and VLAN tags present in packets.
Differences between v2.44 and v2.43:
* Rebase for the following changes:
f47ea02 ("Set datapath mask bits when setting a flow field.")
7fdb60a ("Add support for write-actions")
7358063 ("odp-util: Elaborate the comment for odp_flow_format() function.")
* Correct final_vlan_tci and next_vlan_tci initialisation in xlate_actions__()
Differences between v2.43 and v2.42:
* As suggested by Ben Pfaff
Move vlan state into struct xlate_ctx
1. Add final_vlan_tci member to struct xlate_ctx instead of vlan_tci member
struct xlate_xin. This seems to be a better palace for it as it does
not need to be accessible from the caller.
2. Move local vlan_tci variable of do_xlate_actions() to be the
next_vlan_tci member of strict xlate_ctx. This allows for it to work
across resubmit actions and goto table instructions.
* Code contributed by Ben Pfaff
+ Use enum for to control order of MPLS LSE insertion
This makes the logic somewhat clearer
* Add a helper push_mpls_from_openflow() to consolidate
the same logic that appears in three locations.
Differences between v2.42 and v2.41:
* Rebase for:
+ 0585f7a ("datapath: Simplify mega-flow APIs.")
+ a097c0b ("datapath: Restructure datapath.c and flow.c")
* As suggested by Jesse Gross
+ Take into account that push_mpls() will have freed the skb on error
+ Remove dubious !eth_p_mpls(skb->protocol) condition from push_mpls
The !eth_p_mpls(skb->protocol) condition on setting inner_protocol
has no effect. Its motivation was to ensure that inner_protocol was
only set the first time that mpls_push occured. However this is already
ensured by the !ovs_skb_get_inner_protocol(skb) condition.
+ Return -EINVAL instead of -ENOMEM from pop_mpls() if the skb is too short
+ Do not add @inner_protocol to kernel doc for struct ovs_skb_cb.
The patch no longer adds an inner_protocol member to struct ovs_skb_cb
+ Do not add and set otherwise unsued inner_protocol variable in
rpl_dev_queue_xmit()
* As suggested by Pravin Shelar
+ Implement compatibility code in existing rpl_skb_gso_segment
rather than introducing to use rpl___skb_gso_segment
Differences between v2.41 and v2.40:
* As suggested by Ben Pfaff
+ Expand struct ofpact_reg_load to include a mpls_before_vlan field
rather than using the compat field of the ofpact field of
struct ofpact_reg_load.
+ Pass version to ofpacts_pull_openflow11_actions and
ofpacts_pull_openflow11_instructions. This removes the invalid
assumption that that these functions are passed a full message and are
thus able to deduce the OpenFlow version.
Differences between v2.40 and v2.39:
* Rebase for:
+ New dev_queue_xmit compat code
+ Updated put_vlan()
+ Removal of mpls_depth field from struct flow
* As suggested by Jesse Gross
+ Remove bogus mac_len update from push_mpls()
+ Slightly simplify push_mpls() by using eth_hdr()
+ Remove dubious condition !eth_p_mpls(inner_protocol) on
an skb being considered to be MPLS in netdev_send()
+ Only use compatibility code for MPLS GSO segmentation on kernels
older than 3.11
+ Revamp setting of inner_protocol
1. Do not unconditionally set inner_protocol to the value of
skb->protocol in ovs_execute_actions().
2. Initialise inner_protocol it to zero only if compatibility code is in
use. In the case where compatibility code is not in use it will either
be zero due since the allocation of the skb or some other value set
by some other user.
3. Conditionally set the inner_protocol in push_mpls() to the value of
skb->protocol when entering push_mpls(). The condition is that
inner_protocol is zero and the value of skb->protocol is not an MPLS
ethernet type.
- This new scheme:
+ Pushes logic to set inner_protocol closer to the case where it is
needed.
+ Avoids over-writing values set by other users.
* As suggested by Pravin Shelar
+ Only set and restore skb->protocol in rpl___skb_gso_segment() in the
case of MPLS
+ Add inner_protocol field to struct ovs_gso_cb instead of ovs_skb_cb.
This moves compatibility code closer to where it is used
and creates fewer differences with mainline.
* Update comment on mac_len updates in datapath/actions.c
* Remove HAVE_INNER_PROCOTOL and instead just check
against kernel version 3.11 directly.
HAVE_INNER_PROCOTOL is a hang-over from work done prior
to the merge of inner_protocol into the kernel.
* Remove dubious condition !eth_p_mpls(inner_protocol) on
using inner_protocol as the type in rpl_skb_network_protocol()
* Do not update type of features in rpl_dev_queue_xmit.
Though arguably correct this is not an inherent part of
the changes made by this patch.
* Use skb_cow_head() in push_mpls()
+ Call skb_cow_head(skb, MPLS_HLEN) instead of
make_writable(skb, skb->mac_len) to ensure that there is enough head
room to push an MPLS LSE regardless of whether the skb is cloned or not.
+ This is consistent with the behaviour of rpl__vlan_put_tag().
+ This is a fix for crashes reported when performing mpls_push
with headroom less than 4. This problem was introduced in v3.36.
* Skip popping in mpls_pop if the skb is too short to contain an MPLS LSE
Differences between v2.39 and v2.38:
* Rebase for removal of vlan, checksum and skb->mark compat code
- This includes adding adding a new patch,
"[PATCH v2.39 6/7] datapath: Break out deacceleration portion of
vlan_push" to allow re-use of some existing code.
Differences between v2.38 and v2.37:
* Rebase for SCTP support
* Refactor validate_tp_port() to iterate over eth_types rather
than open-coding the loop. With the addition of SCTP this logic
is now used three times.
Differences between v2.37 and v2.36:
* Rebase
Differences between v2.36 and v2.35:
* Rebase
* Do not add set_ethertype() to datapath/actions.c.
As this patch has evolved this function had devolved into
to sets of functionality wrapped into a single function with
only one line of common code. Refactor things to simply
open-code setting the ether type in the two locations where
set_ethertype() was previously used. The aim here is to improve
readability.
* Update setting skb->ethertype after mpls push and pop.
- In the case of push_mpls it should be set unconditionally
as in v2.35 the behaviour of this function to always push
an MPLS LSE before any VLAN tags.
- In the case of mpls_pop eth_p_mpls(skb->protocol) is a better
test than skb->protocol != htons(ETH_P_8021Q) as it will give the
correct behaviour in the presence of other VLAN ethernet types,
for example 0x88a8 which is used by 802.1ad. Moreover, it seems
correct to update the ethernet type if it was previously set
according to the top-most MPLS LSE.
* Deaccelerate VLANs when pushing MPLS tags the
- Since v2.35 MPLS push will insert an MPLS LSE before any VLAN tags.
This means that if an accelerated tag is present it should be
deaccelerated to ensure it ends up in the correct position.
* Update skb->mac_len in push_mpls() so that it will be correct
when used by a subsequent call to pop_mpls().
As things stand I do not believe this is strictly necessary as
ovs-vswitchd will not send a pop MPLS action after a push MPLS action.
However, I have added this in order to code more defensively as I believe
that if such a sequence did occur it would be rather unobvious why
it didn't work.
* Do not add skb_cow_head() call in push_mpls().
It is unnecessary as there is a make_writable() call.
This change was also made in v2.30 but some how the
code regressed between then and v2.35.
Differences between v2.35 and v2.34:
* Add support for the tag ordering specified up until OpenFlow 1.2 and
the ordering specified from OpenFlow 1.3.
* Correct error in datapath patch's handling of GSO in the presence
of MPLS and absence of VLANs.
To aid review this series is available in git at:
git://github.com/horms/openvswitch.git devel/mpls-v2.45
Patch list and overall diffstat:
Joe Stringer (2):
odp: Allow VLAN actions after MPLS actions
lib: Support pushing of MPLS LSE before or after VLAN tag
Simon Horman (2):
datapath: Break out deacceleration portion of vlan_push
datapath: Add basic MPLS support to kernel
datapath/Modules.mk | 1 +
datapath/actions.c | 158 ++++-
datapath/datapath.c | 4 +-
datapath/flow.c | 29 +
datapath/flow.h | 17 +-
datapath/flow_netlink.c | 286 +++++++-
datapath/flow_netlink.h | 2 +-
datapath/linux/compat/gso.c | 70 +-
datapath/linux/compat/gso.h | 41 ++
datapath/linux/compat/include/linux/netdevice.h | 6 +-
datapath/linux/compat/netdevice.c | 10 +-
datapath/mpls.h | 15 +
include/linux/openvswitch.h | 7 +-
lib/flow.c | 2 +-
lib/odp-util.c | 12 +-
lib/odp-util.h | 3 +-
lib/packets.c | 10 +-
lib/packets.h | 2 +-
ofproto/ofproto-dpif-xlate.c | 145 ++++-
tests/ofproto-dpif.at | 830 ++++++++++++++++++++++++
20 files changed, 1555 insertions(+), 95 deletions(-)
create mode 100644 datapath/mpls.h
--
1.8.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists