| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1384556305-17133-4-git-send-email-Shruti@Freescale.com>
Date: Fri, 15 Nov 2013 16:58:25 -0600
From: Shruti Kanetkar <Shruti@...escale.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>
CC: Madalin Bucur <madalin.bucur@...escale.com>,
Shruti Kanetkar <Shruti@...escale.com>
Subject: [PATCH 4/4] net/phy: Add the autocross feature for forced links on VSC82x4
From: Madalin Bucur <madalin.bucur@...escale.com>
Add auto-MDI/MDI-X capability for forced (autonegotiation disabled)
10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static
function genphy_setup_forced() required by the new config_aneg handler
in the Vitesse PHY module.
Signed-off-by: Madalin Bucur <madalin.bucur@...escale.com>
Signed-off-by: Shruti Kanetkar <Shruti@...escale.com>
---
drivers/net/phy/phy_device.c | 4 +--
drivers/net/phy/vitesse.c | 75 +++++++++++++++++++++++++++++++++++++++++---
include/linux/phy.h | 1 +
3 files changed, 73 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 74630e9..d6447b3 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -697,7 +697,7 @@ static int genphy_config_advert(struct phy_device *phydev)
* to the values in phydev. Assumes that the values are valid.
* Please see phy_sanitize_settings().
*/
-static int genphy_setup_forced(struct phy_device *phydev)
+int genphy_setup_forced(struct phy_device *phydev)
{
int err;
int ctl = 0;
@@ -716,7 +716,7 @@ static int genphy_setup_forced(struct phy_device *phydev)
return err;
}
-
+EXPORT_SYMBOL(genphy_setup_forced);
/**
* genphy_restart_aneg - Enable and Restart Autonegotiation
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 40406bc..508e435 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -3,7 +3,7 @@
*
* Author: Kriston Carson
*
- * Copyright (c) 2005, 2009 Freescale Semiconductor, Inc.
+ * Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -18,6 +18,11 @@
#include <linux/ethtool.h>
#include <linux/phy.h>
+/* Vitesse Extended Page Magic Register(s) */
+#define MII_VSC82X4_EXT_PAGE_16E 0x10
+#define MII_VSC82X4_EXT_PAGE_17E 0x11
+#define MII_VSC82X4_EXT_PAGE_18E 0x12
+
/* Vitesse Extended Control Register 1 */
#define MII_VSC8244_EXT_CON1 0x17
#define MII_VSC8244_EXTCON1_INIT 0x0000
@@ -54,6 +59,9 @@
#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
+/* Vitesse Extended Page Access Register */
+#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f
+
#define PHY_ID_VSC8234 0x000fc620
#define PHY_ID_VSC8244 0x000fc6c0
#define PHY_ID_VSC8574 0x000704a0
@@ -154,6 +162,63 @@ static int vsc8221_config_init(struct phy_device *phydev)
*/
}
+/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links
+ * @phydev: target phy_device struct
+ *
+ * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing
+ * special values in the VSC8234/VSC8244 extended reserved registers
+ */
+static int vsc82x4_config_autocross_enable(struct phy_device *phydev)
+{
+ int ret;
+
+ if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100)
+ return 0;
+
+ /* map extended registers set 0x10 - 0x1e */
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa);
+ /* map standard registers set 0x10 - 0x1e */
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+ else
+ phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+
+ return ret;
+}
+
+/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ * advertising, and then restart auto-negotiation. If it is not
+ * enabled, then we write the BMCR and also start the auto
+ * MDI/MDI-X feature
+ */
+static int vsc82x4_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Enable auto MDI/MDI-X when in 10/100 forced link speeds by
+ * writing special values in the VSC8234 extended reserved registers
+ */
+ if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) {
+ ret = genphy_setup_forced(phydev);
+
+ if (ret < 0) /* error */
+ return ret;
+
+ return vsc82x4_config_autocross_enable(phydev);
+ }
+
+ return genphy_config_aneg(phydev);
+}
+
/* Vitesse 82xx */
static struct phy_driver vsc82xx_driver[] = {
{
@@ -163,7 +228,7 @@ static struct phy_driver vsc82xx_driver[] = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
- .config_aneg = &genphy_config_aneg,
+ .config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
@@ -175,7 +240,7 @@ static struct phy_driver vsc82xx_driver[] = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
- .config_aneg = &genphy_config_aneg,
+ .config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
@@ -187,7 +252,7 @@ static struct phy_driver vsc82xx_driver[] = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
- .config_aneg = &genphy_config_aneg,
+ .config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
@@ -199,7 +264,7 @@ static struct phy_driver vsc82xx_driver[] = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
- .config_aneg = &genphy_config_aneg,
+ .config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 64ab823..48a4dc3 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -559,6 +559,7 @@ static inline int phy_read_status(struct phy_device *phydev) {
return phydev->drv->read_status(phydev);
}
+int genphy_setup_forced(struct phy_device *phydev);
int genphy_restart_aneg(struct phy_device *phydev);
int genphy_config_aneg(struct phy_device *phydev);
int genphy_update_link(struct phy_device *phydev);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists