netdev - [PATCH v2] net: fec_main: dma_map() only the length of the skb

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 2 Dec 2013 10:52:55 +0100
From:	Sebastian Andrzej Siewior <bigeasy@...utronix.de>
To:	Fugang Duan <fugang.duan@...escale.com>
Cc:	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"David S. Miller" <davem@...emloft.net>,
	Fabio Estevam <Fabio.Estevam@...escale.com>,
	Frank Li <frank.li@...escale.net>,
	Jim Baxter <jim_baxter@...tor.com>,
	Marek Szyprowski <m.szyprowski@...sung.com>
Subject: [PATCH v2] net: fec_main: dma_map() only the length of the skb

On tx submit the driver always dma_map_single() FEC_ENET_TX_FRSIZE (=2048)
bytes. This works because we don't overwrite any memory after the data buffer,
we remove it from cache if it was there. So we hurt performace in case the
mapping of a smaller area makes a difference.
There is also a bug: If the data area starts shortly before the end of
RAM say 0xc7fffa10 and the RAM ends at 0xc8000000 then we have enough
space to fit the data area (according to skb->len) but we would map beyond
end of ram if we are using 2048. In v2.6.31 (against which kernel this patch
made) there is the following check in dma_cache_maint():

|BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));

Since the area starting at 0xc8000000 is no longer virt_addr_valid() we
BUG() during dma_map_single(). The BUG() statement was removed in v3.5-rc1 as
per 2dc6a016 ("ARM: dma-mapping: use asm-generic/dma-mapping-common.h").

This patch was tested on v2.6.31 and then forward-ported and compile
tested only against the net tree. I think it is still worth fixing
mainline even after the BUG() statement is gone.

Tested-by: Fugang Duan <B38611@...escale.com>
Cc: Marek Szyprowski <m.szyprowski@...sung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
---
v1..v2: removed a blank line.

 drivers/net/ethernet/freescale/fec_main.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 4cbebf3..73b000d 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -385,7 +385,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	 * data.
 	 */
 	bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, bufaddr,
-			FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
+			skb->len, DMA_TO_DEVICE);
 	if (dma_mapping_error(&fep->pdev->dev, bdp->cbd_bufaddr)) {
 		bdp->cbd_bufaddr = 0;
 		fep->tx_skbuff[index] = NULL;
@@ -779,11 +779,10 @@ fec_enet_tx(struct net_device *ndev)
 		else
 			index = bdp - fep->tx_bd_base;

-		dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
-				FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
-		bdp->cbd_bufaddr = 0;
-
 		skb = fep->tx_skbuff[index];
+		dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr, skb->len,
+				DMA_TO_DEVICE);
+		bdp->cbd_bufaddr = 0;

 		/* Check for errors. */
 		if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
-- 
1.8.4.4

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html