netdev - Re: Spurious timeouts in mvmdio

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <529F14A8.3020109@freebox.fr>
Date:	Wed, 04 Dec 2013 12:40:24 +0100
From:	Nicolas Schichan <nschichan@...ebox.fr>
To:	Russell King - ARM Linux <linux@....linux.org.uk>,
	Leigh Brown <leigh@...inno.co.uk>
CC:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
	Jason Cooper <jason@...edaemon.net>, netdev@...r.kernel.org,
	LKML <linux-kernel@...r.kernel.org>,
	Florian Fainelli <florian@...nwrt.org>,
	"David S. Miller" <davem@...emloft.net>,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: Spurious timeouts in mvmdio

On 12/04/2013 12:42 AM, Russell King - ARM Linux wrote:
>> This will make it correct when using interrupts but it will make the
>> loop wait one jiffie longer than it should when polling.
>
> Alternatively, code it like this instead.
>
>   drivers/net/ethernet/marvell/mvmdio.c |   32 +++++++++++++++-----------------
>   1 files changed, 15 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
> index 7354960b583b..a6f59831fc5b 100644
> --- a/drivers/net/ethernet/marvell/mvmdio.c
> +++ b/drivers/net/ethernet/marvell/mvmdio.c
> @@ -76,31 +76,29 @@ static int orion_mdio_wait_ready(struct mii_bus *bus)
>   {
>   	struct orion_mdio_dev *dev = bus->priv;
>   	unsigned long timeout = usecs_to_jiffies(MVMDIO_SMI_TIMEOUT);
> -	unsigned long end = jiffies + timeout;
> -	int timedout = 0;
>
> -	while (1) {
> -	        if (orion_mdio_smi_is_done(dev))
> +	if (dev->err_interrupt > 0) {
> +		if (wait_event_timeout(dev->smi_busy_wait,
> +				       orion_mdio_smi_is_done(dev),
> +				       1 + timeout))
>   			return 0;
> -	        else if (timedout)
> -			break;
> +	} else {
> +		unsigned long end = jiffies + timeout;
>
> -	        if (dev->err_interrupt <= 0) {
> -			usleep_range(MVMDIO_SMI_POLL_INTERVAL_MIN,
> -				     MVMDIO_SMI_POLL_INTERVAL_MAX);
> +		while (1) {
> +	        	if (orion_mdio_smi_is_done(dev))
> +				return 0;
>
>   			if (time_is_before_jiffies(end))
> -				++timedout;
> -	        } else {
> -			wait_event_timeout(dev->smi_busy_wait,
> -				           orion_mdio_smi_is_done(dev),
> -				           timeout);
> -
> -			++timedout;
> -	        }
> +				break;
> +
> +			usleep_range(MVMDIO_SMI_POLL_INTERVAL_MIN,
> +				     MVMDIO_SMI_POLL_INTERVAL_MAX);
> +		}
>   	}
>
>   	dev_err(bus->parent, "Timeout: SMI busy for too long\n");
> +
>   	return  -ETIMEDOUT;
>   }

Hi Russell,

I have just tested your patch on MV88F6281 and MV88F6282 both in polling and 
irq mode and it works just fine.

I had a similar patch almost ready to submit but you were faster than me.

Feel free to add my:

Tested-by: Nicolas Schichan <nschichan@...ebox.fr>

Thanks,

-- 
Nicolas Schichan
Freebox SAS
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html