Message-ID: <387552477.20131217213319@eikelenboom.it>
Date:	Tue, 17 Dec 2013 21:33:19 +0100
From:	Sander Eikelenboom <linux@...elenboom.it>
To:	Julian Calaby <julian.calaby@...il.com>
CC:	Arend van Spriel <arend@...adcom.com>,
	"Luis R. Rodriguez" <mcgrof@...not-panic.com>,
	Linus Torvalds <torvalds@...ux-foundation.org>,
	"Berg, Johannes" <johannes.berg@...el.com>,
	"Grumbach, Emmanuel" <emmanuel.grumbach@...el.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"ilw@...ux.intel.com" <ilw@...ux.intel.com>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
	"John W. Linville" <linville@...driver.com>,
	Avinash Patil <avinashapatil@...il.com>
Subject: Re: [cfg80211 / iwlwifi] setting wireless regulatory domain doesn't work.

Hello Sander,

Tuesday, December 17, 2013, 10:45:48 AM, you wrote:


> Tuesday, December 17, 2013, 3:17:50 AM, you wrote:

>> Hi Sander,

>> On Mon, Dec 16, 2013 at 11:56 PM, Sander Eikelenboom
>> <linux@...elenboom.it> wrote:
>>>
>>> Monday, December 16, 2013, 12:37:47 PM, you wrote:
>>>
>>>> On 12/16/2013 12:22 PM, Sander Eikelenboom wrote:
>>>>>
>>>>> Wednesday, December 11, 2013, 7:38:50 PM, you wrote:
>>>>>
>>>>>> On Wed, Dec 11, 2013 at 7:11 PM, Sander Eikelenboom
>>>>>> <linux@...elenboom.it> wrote:
>>>>>>>
>>>>>>> Wednesday, December 11, 2013, 6:53:07 PM, you wrote:
>>>>>>>
>>>>>>>> The best way to address all this is by automatic region awareness and
>>>>>>>> doing the right thing on devices, this however requires good
>>>>>>>> architecture / calibration data  / etc and all that needs to be
>>>>>>>> verified by the system integrators, and finally they need to be
>>>>>>>> certified. If you want to hack your firmware and software go at it,
>>>>>>>> just be aware there are reasons for things.
>>>>>>>
>>>>>>> Well the general problem seems to be "we don't trust the user" so we FORCE him to the lowest
>>>>>>> common denominator (without a way to overrule that) so he is forced to operate *well* within the law.
>>>>>
>>>>>> Its simply stupid to have the user be involved, period, the fact that
>>>>>> a user would be involved should only be for testing or helping
>>>>>> compliance for a busted device, development, research and obviously
>>>>>> hacking. Linux allows all these but by default a device with firmware
>>>>>> and a custom regdomain that will barf if you try to use a channel that
>>>>>> is not allowed is a restriction in firmware. Feel free to reverse
>>>>>> engineer that if you don't like it but it just won't be supported or
>>>>>> go upstream. Now, the common denominator is generally optimized for
>>>>>> best performance as well so you shouldn't have to do anything, and for
>>>>>> APs -- this is typically carefully crafted for a region, also highly
>>>>>> optimized.
>>>>>
>>>>>>>>>> It doesn't seem like you are getting your original requests getting
>>>>>>>>>> processed, so I don't think CRDA is passing it. Can you verify running
>>>>>>>>>> from CRDA code:
>>>>>>>>>
>>>>>>>>> They don't get processed unless i remove the return from the code as i indicated.
>>>>>>>>> If i remove that return it processes the request.
>>>>>>>>>
>>>>>>>>>> ./regdbdump /usr/lib/crda/regulatory.bin
>>>>>>>>>
>>>>>>>>> Although it's in a different location on Debian, /lib/crda/regulatory.bin
>>>>>>>>> the dump seems fine.
>>>>>>>
>>>>>>>> OK thanks. Can you send a patch of what exact change you made, it was
>>>>>>>> unclear from the paste you made.
>>>>>>>
>>>>>>>> diff -u file.c.orig file.c
>>>>>>>
>>>>>>> Well i just did a pull from wireless-next, to try Avinash Patil's patch.
>>>>>>> net/wireless/reg.c had already changed much so i couldn't apply his patch without.
>>>>>>>
>>>>>>> With his patch it sets the regulatory domain, although as now expected i still can not use channels 12 and 13 yet,
>>>>>>> probably due to those firmware restrictions.
>>>>>
>>>>>> Its unclear what results you got, and yeah if the device is restricted
>>>>>> then its just the fw telling the driver its channels and you can't use
>>>>>> them. That's it. You won't be able to override information then unless
>>>>>> you hack the firmware
>>>>>
>>>>> Ping ?
>>>>>
>>>>> Is there anymore information you need to *fix* the problem ?
>>>
>>>> Maybe you did not get the essence of the response from Luis: There is
>>>> *no* problem to be fixed.
>>>
>>> *sigh* ..
>>>
>>> Let's start from scratch then ...
>>>
>>>
>>> a) Isn't the point of the whole regulatory domain system that i can select (and restrict) the channels/frequencies my devices transmits on, so i can abide the law ?
>>> b) If so, does it set a regulatory domain from firmware  ?
>>> c) If so, should it let me *restrict* the available channels even more by setting the regulatory domain to the region in which de device is currently being used ?
>>> d) If so, why am i not  able to do so with my intel driver for a long time (for over a month now).
>>> # iw reg get
>>> country 00:
>>>         (2402 - 2472 @ 40), (6, 20)
>>>         (2457 - 2482 @ 40), (6, 20), PASSIVE-SCAN
>>>         (2474 - 2494 @ 20), (6, 20), NO-OFDM, PASSIVE-SCAN
>>>         (5170 - 5250 @ 160), (6, 20), PASSIVE-SCAN
>>>         (5250 - 5330 @ 160), (6, 20), DFS, PASSIVE-SCAN
>>>         (5490 - 5730 @ 160), (6, 20), DFS, PASSIVE-SCAN
>>> # iw reg set US
>>> # iw reg get
>>> country 00:
>>>         (2402 - 2472 @ 40), (6, 20)
>>>         (2457 - 2482 @ 40), (6, 20), PASSIVE-SCAN
>>>         (2474 - 2494 @ 20), (6, 20), NO-OFDM, PASSIVE-SCAN
>>>         (5170 - 5250 @ 160), (6, 20), PASSIVE-SCAN
>>>         (5250 - 5330 @ 160), (6, 20), DFS, PASSIVE-SCAN
>>>         (5490 - 5730 @ 160), (6, 20), DFS, PASSIVE-SCAN
>>>
>>> Dmesg only spits out:
>>> [  383.849977] cfg80211: Pending regulatory request, waiting for it to be processed...
>>>

>> As has been explained previously, this indicates that, somehow, CRDA
>> is not answering the kernel's requests as it should. Looking at the
>> dmesg you posted before, we have:

>> [    3.862108] cfg80211: Calling CRDA to update world regulatory domain

>> which never gets a reply.

>> Are you using your distro's official CRDA package or have you compiled
>> your own? It might not be installed properly as it looks like it's not
>> responding to the kernel's call to update the world regulatory domain.
>> There's more to installing CRDA than just sticking the executable and
>> database in the right places.

> It's the official Debian package.

> But i have tried to compile the db.txt into the kernel as is mentioned and use the internalregdb kernel config option.


> Could it be that since i compile all modules in the kernel and use --initrd .. that the CRDA is just not
> available at *that* earlier moment in boot when that module gets activated ?

> If so, wouldn't it be feasible to have
> a) timeout with error message
> b) clearing the request so a subsequent request can be made ?

> The way the patches that where posted then circumvent the problem is by just plain ignoring the blocked request.

> I could see if compiling them as loadable modules helps, another thing would be shoveling the whole CRDA stuff
> into initrd.



>> On my system here, I have:

>> [   16.981114] cfg80211: Calling CRDA to update world regulatory domain
>> ...
>> [   17.300582] cfg80211: World regulatory domain updated:
>> [   17.300592] cfg80211:   (start_freq - end_freq @ bandwidth),
>> (max_antenna_gain, max_eirp)
>> [   17.300594] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz),
>> (300 mBi, 2000 mBm)
>> [   17.300597] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz),
>> (300 mBi, 2000 mBm)
>> [   17.300598] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz),
>> (300 mBi, 2000 mBm)
>> [   17.300600] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz),
>> (300 mBi, 2000 mBm)
>> [   17.300602] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz),
>> (300 mBi, 2000 mBm)

>> Your dmesg doesn't have the response listed, therefore CRDA is not
>> responding to the kernel's requests. The kernel will not make
>> additional requests until the previous one is answered.

>>> e) So why doesn't this whole regulatory mumbojumbo and the Linux implementation in particular let me abide the law ?!? Wasn't that it's *sole* point of existence ?

>> It _is_ doing this.

>> The world regulatory domain is the intersection of all the regulatory
>> domains we know of. This is the _most_ restricted version which
>> _ensures_ that you're obeying the law _everywhere_.

>>> f) Why doesn't seem anyone to be seriously looking at it (for over a month now, while everyone from wireless/80211 to intel driver maintainers were CC'ed) ?

>> Because there is no bug in the kernel, the bug is in your system's setup.

> I will leave this one in the clear for the moment ... (nope i will not .. see below ;-) )


>>> g) Saying it has got to do with reg db's not being found or all kinds of other arguments while
>>>    the report clearly stated the way it can be circumvented by 2 simple patches that don't seem to involve any changes to
>>>    how it finds the reg db (apart from that i tested that a few times on request and indicated it didn't matter)
>>>    in current 3.13 code (and 3.12 and perhaps even earlier) (case 1)
>>>    or
>>>    with current wireless-next pulled (which has quite some changes to reg.c but none fixes this) onto 3.13 (case 2)
>>>    Neither of these patches might be correct codewise, but at least it let's me set the regulatory domain, and the current state the code is in is neither correct.

>> These patches _break_ the functionality of the kernel, not fix it.

>> They allow the kernel to issue requests before the previous one is
>> answered. This is a bug. There are good reasons why this is not
>> allowed.

> Yes because for some reason it's allowed for requests to block for ever ... which could be considered a bug.
> So yes it's the wrong fix ... but it at least identifies a problem .. infinite blocking requests.


> I will report back when i have tested converting the wireless stuff to loadable modules / seeing if i can put the CRDA stuff in initrd.

With all the wireless stuff switched to loadable modules it *does* work.

So the problem is that:
The current code blocks all future regulatory domain setting attempts forever (till the next reboot)
when it can't find the CRDA. This can and does happen when the modules are compiled in and the CRDA is not in initrd.

So from the question department:

A) Why doesn't the code timeout the processing of a regulatory domain hint and remove the pending request when it aborts ?
B) Why isn't the CRDA treated as firmware and placed in /lib/firmware, which has a much greater chance of automagically appearing in initrd ?
C) Why as a bare minimum, doesn't it have a sane readable warning about not being able to read *which* exact file, without having to second guess
   to *why* the regulatory hint processing is taking *forever* ?

>> Thanks,




-- 
Best regards,
 Sander                            mailto:linux@...elenboom.it

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists