[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1387416526-7394-9-git-send-email-hauke@hauke-m.de>
Date: Thu, 19 Dec 2013 02:28:45 +0100
From: Hauke Mehrtens <hauke@...ke-m.de>
To: davem@...emloft.net
Cc: zambrano@...adcom.com, netdev@...r.kernel.org,
f.fainelli@...il.com, Hauke Mehrtens <hauke@...ke-m.de>
Subject: [PATCH v2 8/9] b44: do not set PHY address to 30 for every ext PHY
b44_phy_reset() will fail for an external PHY and only work with the
internal PHY, this was an old workaround when the detection of an
external switch based on the PHY address failed and it is not needed
any more.
Signed-off-by: Hauke Mehrtens <hauke@...ke-m.de>
---
drivers/net/ethernet/broadcom/b44.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index d17561b..839dd90 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -2412,8 +2412,11 @@ static int b44_init_one(struct ssb_device *sdev,
b44_chip_reset(bp, B44_CHIP_RESET_FULL);
/* do a phy reset to test if there is an active phy */
- if (b44_phy_reset(bp) < 0)
- bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ err = b44_phy_reset(bp);
+ if (err < 0) {
+ dev_err(sdev->dev, "phy reset failed\n");
+ goto err_out_unregister_netdev;
+ }
if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
err = b44_register_phy_one(bp);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists