| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 24 Dec 2013 06:22:24 -0800
From: Joe Perches <joe@...ches.com>
To: Ding Tianhong <dingtianhong@...wei.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Netdev <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
e1000-devel@...ts.sourceforge.net
Subject: Re: [PATCH v2 01/20] net: slight optimization of addr compare for
some modules
On Tue, 2013-12-24 at 19:27 +0800, Ding Tianhong wrote:
> Use possibly more efficient ether_addr_equal_unaligned
> and ether_addr_equal to instead of memcmp.
A negative of adding so many different drivers in a single
patch is that you miss sending patches to the named maintainers.
Most of these below have separate individual maintainers.
(a suggested patch below this too)
> drivers/net/bonding/bond_3ad.c | 2 +-
> drivers/net/ethernet/3com/3c509.c | 3 +--
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 10 ++++------
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 2 +-
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 2 +-
> drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c | 2 +-
> drivers/net/ethernet/chelsio/cxgb3/l2t.c | 2 +-
> drivers/net/ethernet/cisco/enic/enic_pp.c | 2 +-
> drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
> drivers/net/ethernet/intel/igbvf/netdev.c | 2 +-
> drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 3 +--
> drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ++--
> drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 2 +-
> drivers/net/ethernet/micrel/ksz884x.c | 9 ++++-----
> drivers/net/ethernet/neterion/vxge/vxge-main.c | 2 +-
> drivers/net/ethernet/packetengines/yellowfin.c | 8 ++------
> drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c | 2 +-
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 4 ++--
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 4 ++--
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 4 ++--
> drivers/net/ethernet/renesas/sh_eth.c | 2 +-
> drivers/net/ethernet/seeq/sgiseeq.c | 2 +-
> drivers/net/ethernet/sun/sunvnet.c | 2 +-
> drivers/net/ethernet/ti/cpsw_ale.c | 2 +-
> drivers/net/fddi/skfp/fplustm.c | 3 ++-
> drivers/net/plip/plip.c | 2 +-
> net/caif/cfrfml.c | 2 +-
> 27 files changed, 39 insertions(+), 47 deletions(-)
Also for bonding, my preference would be to rename
the macro and use ether_addr_equal as it seems that
all references are u16 aligned.
I also removed some superfluous parentheses.
---
drivers/net/bonding/bond_3ad.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 187b1b7..ae56983 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -91,7 +91,8 @@
//endalloun
// compare MAC addresses
-#define MAC_ADDRESS_COMPARE(A, B) memcmp(A, B, ETH_ALEN)
+#define MAC_ADDRESS_EQUAL(A, B) \
+ ether_addr_equal((const u8 *)A, (const u8 *)B)
static struct mac_addr null_mac_addr = { { 0, 0, 0, 0, 0, 0 } };
static u16 ad_ticks_per_sec;
@@ -419,7 +420,7 @@ static void __choose_matched(struct lacpdu *lacpdu, struct port *port)
// check if all parameters are alike
if (((ntohs(lacpdu->partner_port) == port->actor_port_number) &&
(ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) &&
- !MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) &&
+ MAC_ADDRESS_EQUAL(&lacpdu->partner_system, &port->actor_system) &&
(ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) &&
(ntohs(lacpdu->partner_key) == port->actor_oper_port_key) &&
((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) ||
@@ -509,7 +510,7 @@ static void __update_selected(struct lacpdu *lacpdu, struct port *port)
// check if any parameter is different
if (ntohs(lacpdu->actor_port) != partner->port_number ||
ntohs(lacpdu->actor_port_priority) != partner->port_priority ||
- MAC_ADDRESS_COMPARE(&lacpdu->actor_system, &partner->system) ||
+ !MAC_ADDRESS_EQUAL(&lacpdu->actor_system, &partner->system) ||
ntohs(lacpdu->actor_system_priority) != partner->system_priority ||
ntohs(lacpdu->actor_key) != partner->key ||
(lacpdu->actor_state & AD_STATE_AGGREGATION) != (partner->port_state & AD_STATE_AGGREGATION)) {
@@ -540,7 +541,7 @@ static void __update_default_selected(struct port *port)
// check if any parameter is different
if (admin->port_number != oper->port_number ||
admin->port_priority != oper->port_priority ||
- MAC_ADDRESS_COMPARE(&admin->system, &oper->system) ||
+ !MAC_ADDRESS_EQUAL(&admin->system, &oper->system) ||
admin->system_priority != oper->system_priority ||
admin->key != oper->key ||
(admin->port_state & AD_STATE_AGGREGATION)
@@ -570,7 +571,7 @@ static void __update_ntt(struct lacpdu *lacpdu, struct port *port)
// check if any parameter is different
if ((ntohs(lacpdu->partner_port) != port->actor_port_number) ||
(ntohs(lacpdu->partner_port_priority) != port->actor_port_priority) ||
- MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) ||
+ !MAC_ADDRESS_EQUAL(&lacpdu->partner_system, &port->actor_system) ||
(ntohs(lacpdu->partner_system_priority) != port->actor_system_priority) ||
(ntohs(lacpdu->partner_key) != port->actor_oper_port_key) ||
((lacpdu->partner_state & AD_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY)) ||
@@ -1072,7 +1073,7 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
break;
case AD_RX_CURRENT:
// detect loopback situation
- if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) {
+ if (MAC_ADDRESS_EQUAL(&lacpdu->actor_system, &port->actor_system)) {
// INFO_RECEIVED_LOOPBACK_FRAMES
pr_err("%s: An illegal loopback occurred on adapter (%s).\n"
"Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n",
@@ -1278,11 +1279,11 @@ static void ad_port_selection_logic(struct port *port)
}
// check if current aggregator suits us
if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) && // if all parameters match AND
- !MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(port->partner_oper.system)) &&
+ MAC_ADDRESS_EQUAL(&aggregator->partner_system, &port->partner_oper.system) &&
(aggregator->partner_system_priority == port->partner_oper.system_priority) &&
(aggregator->partner_oper_aggregator_key == port->partner_oper.key)
) &&
- ((MAC_ADDRESS_COMPARE(&(port->partner_oper.system), &(null_mac_addr)) && // partner answers
+ ((!MAC_ADDRESS_EQUAL(&port->partner_oper.system, &null_mac_addr) && // partner answers
!aggregator->is_individual) // but is not individual OR
)
) {
@@ -1696,7 +1697,7 @@ static void ad_enable_collecting_distributing(struct port *port)
*/
static void ad_disable_collecting_distributing(struct port *port)
{
- if (port->aggregator && MAC_ADDRESS_COMPARE(&(port->aggregator->partner_system), &(null_mac_addr))) {
+ if (port->aggregator && !MAC_ADDRESS_EQUAL(&port->aggregator->partner_system, &null_mac_addr)) {
pr_debug("Disabling port %d(LAG %d)\n",
port->actor_port_number,
port->aggregator->aggregator_identifier);
@@ -1818,8 +1819,8 @@ static u16 aggregator_identifier;
void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
{
// check that the bond is not initialized yet
- if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr),
- bond->dev->dev_addr)) {
+ if (!MAC_ADDRESS_EQUAL(&BOND_AD_INFO(bond).system.sys_mac_addr,
+ bond->dev->dev_addr)) {
aggregator_identifier = 0;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists