[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 1 Jan 2014 11:06:43 +0200
From: Yaniv Rosner <yanivr@...adcom.com>
To: David Miller <davem@...emloft.net>
CC: netdev <netdev@...r.kernel.org>,
Yaniv Rosner <yanivr@...adcom.com>,
Ariel Elior <ariele@...adcom.com>
Subject: [PATCH net 3/5] bnx2x: Fix Duplex setting for 54618se
BCM54618SE is used to advertise half-duplex even if HD was not requested by the
user. This change makes the legacy speed/duplex advertisement for this PHY
exactly according to the requested speed and duplex.
Signed-off-by: Yaniv Rosner <yanivr@...adcom.com>
Signed-off-by: Ariel Elior <ariele@...adcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 54 +++++++++++----------
1 files changed, 28 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 000b6ee..68417e1 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -10841,9 +10841,9 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
(1<<11));
if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
- (phy->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
- (phy->req_line_speed == SPEED_1000)) {
+ (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
+ (phy->req_line_speed == SPEED_1000)) {
an_1000_val |= (1<<8);
autoneg_val |= (1<<9 | 1<<12);
if (phy->req_duplex == DUPLEX_FULL)
@@ -10859,30 +10859,32 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
0x09,
&an_1000_val);
- /* Set 100 speed advertisement */
- if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
- (phy->speed_cap_mask &
- (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL |
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) {
- an_10_100_val |= (1<<7);
- /* Enable autoneg and restart autoneg for legacy speeds */
- autoneg_val |= (1<<9 | 1<<12);
-
- if (phy->req_duplex == DUPLEX_FULL)
- an_10_100_val |= (1<<8);
- DP(NETIF_MSG_LINK, "Advertising 100M\n");
- }
-
- /* Set 10 speed advertisement */
- if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
- (phy->speed_cap_mask &
- (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL |
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) {
- an_10_100_val |= (1<<5);
- autoneg_val |= (1<<9 | 1<<12);
- if (phy->req_duplex == DUPLEX_FULL)
+ /* Advertise 10/100 link speed */
+ if (phy->req_line_speed == SPEED_AUTO_NEG) {
+ if (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
+ an_10_100_val |= (1<<5);
+ autoneg_val |= (1<<9 | 1<<12);
+ DP(NETIF_MSG_LINK, "Advertising 10M-HD\n");
+ }
+ if (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) {
an_10_100_val |= (1<<6);
- DP(NETIF_MSG_LINK, "Advertising 10M\n");
+ autoneg_val |= (1<<9 | 1<<12);
+ DP(NETIF_MSG_LINK, "Advertising 10M-FD\n");
+ }
+ if (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
+ an_10_100_val |= (1<<7);
+ autoneg_val |= (1<<9 | 1<<12);
+ DP(NETIF_MSG_LINK, "Advertising 100M-HD\n");
+ }
+ if (phy->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
+ an_10_100_val |= (1<<8);
+ autoneg_val |= (1<<9 | 1<<12);
+ DP(NETIF_MSG_LINK, "Advertising 100M-FD\n");
+ }
}
/* Only 10/100 are allowed to work in FORCE mode */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists