| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1388880647-7611-6-git-send-email-hauke@hauke-m.de>
Date: Sun, 5 Jan 2014 01:10:47 +0100
From: Hauke Mehrtens <hauke@...ke-m.de>
To: davem@...emloft.net
Cc: zajec5@...il.com, netdev@...r.kernel.org,
Hauke Mehrtens <hauke@...ke-m.de>
Subject: [PATCH v3 5/5] bgmac: add support for Northstar SoC (BCM4707, BCM53018)
This adds support for the Northstar SoC. This SoC does not have a PMU in
bcma and no register on it should be called. In addition it support 2.5
GBit/s Ethernet to the PHY.
This GMAC core is not fully working there are still problems with the
DMA controller.
Signed-off-by: Hauke Mehrtens <hauke@...ke-m.de>
---
drivers/net/ethernet/broadcom/bgmac.c | 63 +++++++++++++++++++++++----------
drivers/net/ethernet/broadcom/bgmac.h | 1 +
2 files changed, 46 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index 2cdacb8..5d41f41 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -848,6 +848,9 @@ static void bgmac_mac_speed(struct bgmac *bgmac)
case SPEED_1000:
set |= BGMAC_CMDCFG_ES_1000;
break;
+ case SPEED_2500:
+ set |= BGMAC_CMDCFG_ES_2500;
+ break;
default:
bgmac_err(bgmac, "Unsupported speed: %d\n", bgmac->mac_speed);
}
@@ -860,12 +863,26 @@ static void bgmac_mac_speed(struct bgmac *bgmac)
static void bgmac_miiconfig(struct bgmac *bgmac)
{
- u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
- BGMAC_DS_MM_SHIFT;
- if (imode == 0 || imode == 1) {
- bgmac->mac_speed = SPEED_100;
+ struct bcma_device *core = bgmac->core;
+ struct bcma_chipinfo *ci = &core->bus->chipinfo;
+ u8 imode;
+
+ if (ci->id == BCMA_CHIP_ID_BCM4707 ||
+ ci->id == BCMA_CHIP_ID_BCM53018) {
+ bcma_awrite32(core, BCMA_IOCTL,
+ bcma_aread32(core, BCMA_IOCTL) | 0x40 |
+ BGMAC_BCMA_IOCTL_SW_CLKEN);
+ bgmac->mac_speed = SPEED_2500;
bgmac->mac_duplex = DUPLEX_FULL;
bgmac_mac_speed(bgmac);
+ } else {
+ imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) &
+ BGMAC_DS_MM_MASK) >> BGMAC_DS_MM_SHIFT;
+ if (imode == 0 || imode == 1) {
+ bgmac->mac_speed = SPEED_100;
+ bgmac->mac_duplex = DUPLEX_FULL;
+ bgmac_mac_speed(bgmac);
+ }
}
}
@@ -875,7 +892,7 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
struct bcma_device *core = bgmac->core;
struct bcma_bus *bus = core->bus;
struct bcma_chipinfo *ci = &bus->chipinfo;
- u32 flags = 0;
+ u32 flags;
u32 iost;
int i;
@@ -903,15 +920,21 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
(ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188))
iost &= ~BGMAC_BCMA_IOST_ATTACHED;
- if (iost & BGMAC_BCMA_IOST_ATTACHED) {
- flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
- if (!bgmac->has_robosw)
- flags |= BGMAC_BCMA_IOCTL_SW_RESET;
+ /* 3GMAC: for BCM4707, only do core reset at bgmac_probe() */
+ if (ci->id != BCMA_CHIP_ID_BCM4707) {
+ flags = 0;
+ if (iost & BGMAC_BCMA_IOST_ATTACHED) {
+ flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
+ if (!bgmac->has_robosw)
+ flags |= BGMAC_BCMA_IOCTL_SW_RESET;
+ }
+ bcma_core_enable(core, flags);
}
- bcma_core_enable(core, flags);
-
- if (core->id.rev > 2) {
+ /* Request Misc PLL for corerev > 2 */
+ if (core->id.rev > 2 &&
+ ci->id != BCMA_CHIP_ID_BCM4707 &&
+ ci->id != BCMA_CHIP_ID_BCM53018) {
bgmac_set(bgmac, BCMA_CLKCTLST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ);
bgmac_wait_value(bgmac->core, BCMA_CLKCTLST,
@@ -1049,12 +1072,16 @@ static void bgmac_enable(struct bgmac *bgmac)
break;
}
- rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
- rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
- bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000;
- mdp = (bp_clk * 128 / 1000) - 3;
- rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
- bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
+ if (ci->id != BCMA_CHIP_ID_BCM4707 &&
+ ci->id != BCMA_CHIP_ID_BCM53018) {
+ rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
+ rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
+ bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) /
+ 1000000;
+ mdp = (bp_clk * 128 / 1000) - 3;
+ rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
+ bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
+ }
}
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h
index 2da12ed..89fa5bc 100644
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -189,6 +189,7 @@
#define BGMAC_CMDCFG_ES_10 0x00000000
#define BGMAC_CMDCFG_ES_100 0x00000004
#define BGMAC_CMDCFG_ES_1000 0x00000008
+#define BGMAC_CMDCFG_ES_2500 0x0000000C
#define BGMAC_CMDCFG_PROM 0x00000010 /* Set to activate promiscuous mode */
#define BGMAC_CMDCFG_PAD_EN 0x00000020
#define BGMAC_CMDCFG_CF 0x00000040
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists