[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1389372539-13753-8-git-send-email-shahed.shaikh@qlogic.com>
Date: Fri, 10 Jan 2014 11:48:58 -0500
From: Shahed Shaikh <shahed.shaikh@...gic.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <Dept_NX_Linux_NIC_Driver@...gic.com>,
Shahed Shaikh <shahed.shaikh@...gic.com>
Subject: [PATCH net-next 7/8] qlcnic: Enable IPv6 LRO even if IP address is not programmed
From: Shahed Shaikh <shahed.shaikh@...gic.com>
o Enabling BIT_9 while configuring hardware LRO allows adapter to
perform LRO even if destination IP address is not programmed in adapter.
Signed-off-by: Shahed Shaikh <shahed.shaikh@...gic.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index e96b76d..6ca5e57 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -782,8 +782,8 @@ void qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *adapter)
"Could not send interrupt coalescing parameters\n");
}
-#define QLCNIC_ENABLE_IPV4_LRO 1
-#define QLCNIC_ENABLE_IPV6_LRO 2
+#define QLCNIC_ENABLE_IPV4_LRO BIT_0
+#define QLCNIC_ENABLE_IPV6_LRO (BIT_1 | BIT_9)
int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
{
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists