netdev - [PATCH net-next v3 6/8] net: stmmac: Deprecate snps,phy-addr and auto-detect PHY address

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1389965087-21971-7-git-send-email-wens@csie.org>
Date:	Fri, 17 Jan 2014 21:24:45 +0800
From:	Chen-Yu Tsai <wens@...e.org>
To:	netdev@...r.kernel.org
Cc:	Chen-Yu Tsai <wens@...e.org>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>,
	Srinivas Kandagatla <srinivas.kandagatla@...com>,
	linux-arm-kernel@...ts.infradead.org, linux-sunxi@...glegroups.com,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH net-next v3 6/8] net: stmmac: Deprecate snps,phy-addr and auto-detect PHY address

The snps,phy-addr device tree property is non-standard, and should be
removed in favor of proper phy node support. Remove it from the binding
documents and warn if the property is still used.

Most PHYs respond to address 0, but a few don't, so auto-detect PHY
address by default, to make up for the lack of explicit address selection.

Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
 Documentation/devicetree/bindings/net/stmmac.txt      | 1 -
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 ++++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index d132513..aefb639 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -12,7 +12,6 @@ Required properties:
   property
 - phy-mode: String, operation mode of the PHY interface.
   Supported values are: "mii", "rmii", "gmii", "rgmii".
-- snps,phy-addr		phy address to connect to.
 - snps,reset-gpio 	gpio number for phy reset.
 - snps,reset-active-low boolean flag to indicate if phy reset is active low.
 - snps,reset-delays-us  is triplet of delays
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 634260e..82110f1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -50,7 +50,14 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
 	if (plat->bus_id < 0)
 		plat->bus_id = 0;
 
-	of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr);
+	/* Default to phy auto-detection */
+	plat->phy_addr = -1;
+
+	/* "snps,phy-addr" is not a standard property. Mark it as deprecated
+	 * and warn of its use. Remove this when phy node support is added.
+	 */
+	if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
+		dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
 
 	plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
 					   sizeof(struct stmmac_mdio_bus_data),
-- 
1.8.5.2

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html