netdev - Re: [PATCH v2 01/16] reset: add non CONFIG_RESET

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAGb2v647_Am_spers6X0+16JShNa-Xo9Fozc1eZnYzbeU-wgoQ@mail.gmail.com>
Date:	Fri, 17 Jan 2014 11:46:02 +0800
From:	Chen-Yu Tsai <wens@...e.org>
To:	Philipp Zabel <p.zabel@...gutronix.de>
Cc:	Srinivas Kandagatla <srinivas.kandagatla@...com>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>,
	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	netdev <netdev@...r.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
	linux-sunxi <linux-sunxi@...glegroups.com>,
	linux-kernel <linux-kernel@...r.kernel.org>,
	Rob Herring <rob.herring@...xeda.com>,
	Emilio Lopez <emilio@...pez.com.ar>,
	Mike Turquette <mturquette@...aro.org>,
	"Ivan T. Ivanov" <iivanov@...sol.com>,
	Barry Song <Baohua.Song@....com>,
	Stephen Warren <swarren@...dotorg.org>
Subject: Re: [PATCH v2 01/16] reset: add non CONFIG_RESET_CONTROLLER routines

Hi,

On Fri, Jan 10, 2014 at 9:30 PM, Philipp Zabel <p.zabel@...gutronix.de> wrote:
> Hi,
>
> [Added Ivan, Stephen and Barry to Cc:]
>
> Am Freitag, den 10.01.2014, 15:00 +0800 schrieb Chen-Yu Tsai:
>> Some drivers are shared between platforms that may or may not
>> have RESET_CONTROLLER selected for them.
>
> I expected that drivers compiled for platforms without reset controllers
> but use the reset API should select or depend on RESET_CONTROLLER.
> Stubbing out device_reset and reset_control_get will turn a compile time
> error into a runtime error for everyone forgetting to do this when
> writing a new driver that needs the reset.

Since this was the intended behavior, I'll drop this patch and select
RESET_CONTROLLER for the stmmac driver for now.


Thanks
ChenYu

>
>>  Add dummy functions
>> when RESET_CONTROLLER is not selected, thereby eliminating the
>> need for drivers to enclose reset_control_*() calls within
>> #ifdef CONFIG_RESET_CONTROLLER, #endif
>>
>> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
>
> This was already proposed by Ivan and Barry earlier, and so far we
> didn't get to a proper conclusion:
>
> https://lkml.org/lkml/2013/10/10/179
> http://lists.infradead.org/pipermail/linux-arm-kernel/2013-June/174758.html
>
> If included, the stubs should at least return an error to indicate a
> reset couldn't be performed, but then I lose the compile time error for
> drivers which should select RESET_CONTROLLER but don't.
>
> Also this alone won't help you if you build multi-arch kernels where one
> platform enables RESET_CONTROLLER and the other expects it to be
> disabled.
>
> regards
> Philipp
>
>> ---
>>  include/linux/reset.h | 39 +++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 39 insertions(+)
>>
>> diff --git a/include/linux/reset.h b/include/linux/reset.h
>> index 6082247..38aa616 100644
>> --- a/include/linux/reset.h
>> +++ b/include/linux/reset.h
>> @@ -4,6 +4,8 @@
>>  struct device;
>>  struct reset_control;
>>
>> +#ifdef CONFIG_RESET_CONTROLLER
>> +
>>  int reset_control_reset(struct reset_control *rstc);
>>  int reset_control_assert(struct reset_control *rstc);
>>  int reset_control_deassert(struct reset_control *rstc);
>> @@ -14,4 +16,41 @@ struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
>>
>>  int device_reset(struct device *dev);
>>
>> +#else /* !CONFIG_RESET_CONTROLLER */
>> +
>> +static inline int reset_control_reset(struct reset_control *rstc)
>> +{
>> +     return 0;
>> +}
>> +
>> +static inline int reset_control_assert(struct reset_control *rstc)
>> +{
>> +     return 0;
>> +}
>> +
>> +static inline int reset_control_deassert(struct reset_control *rstc)
>> +{
>> +     return 0;
>> +}
>
> Those should probably have a WARN_ON(1) like the GPIO API stubs.
>
>> +
>> +static inline struct reset_control *reset_control_get(struct device *dev,
>> +             const char *id)
>> +{
>> +     return NULL;
>> +}
> [...]
>> +static inline struct reset_control *devm_reset_control_get(struct device *dev,
>> +             const char *id)
>> +{
>> +     return NULL;
>> +}
>
> These should return ERR_PTR(-ENOSYS).
>
>> +
>> +static inline int device_reset(struct device *dev)
>> +{
>> +     return 0;
>> +}
>
> And this should return -ENOSYS.
>
> Drivers that also need to run on platforms with CONFIG_RESET_CONTROLLER
> disabled (and that don't need the reset) should ignore -ENOSYS and
> -ENOENT return values from device_reset/(devm_)reset_control_get.
>
> I wonder if it might be a good idea to add a RESET_CONTROLLER_OPTIONAL
> that drivers need to select to enable the API stubs? That way we could
> keep the compile time error for new drivers that need resets but forget
> to select RESET_CONTROLLER.
> Or add a
> #warning If this driver can work without reset, please select CONFIG_RESET_CONTROLLER_OPTIONAL
>
> Another possibility would be to add device_reset_optional and
> (devm_)reset_control_get_optional variants and only provide stubs for
> those, but not for device_reset/(devm_)reset_control_get. Then drivers
> that need to work on platforms without the reset controller API enabled
> could explicitly use the _optional variants, and all other drivers would
> still be checked at compile time.
>
> regards
> Philipp
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html