| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1392269395-23513-5-git-send-email-f.fainelli@gmail.com>
Date: Wed, 12 Feb 2014 21:29:49 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: <netdev@...r.kernel.org>
CC: <davem@...emloft.net>, <cernekee@...il.com>,
<devicetree@...r.kernel.org>,
Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next v2 04/10] net: phy: add Broadcom BCM7xxx internal PHY driver
This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs
internal PHYs. This driver supports the following generation of SoCs:
- BCM7366, BCM7439, BCM7445 (28nm process)
- all 40nm and 65nm (older MIPS-based SoCs)
The PHYs on these SoCs require a bunch of workarounds to operate
correctly, both during configuration time and at suspend/resume time,
the driver handles that for us.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
Changes since v1:
- update the 28nm AFE workaround to clear the EEE LPI
timer (value 0xeb17 previously now 0xeb19)
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/bcm7xxx.c | 322 ++++++++++++++++++++++++++++++++++++++++++++++
include/linux/brcmphy.h | 9 ++
4 files changed, 338 insertions(+)
create mode 100644 drivers/net/phy/bcm7xxx.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 9b5d46c..6a17f92 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -71,6 +71,12 @@ config BCM63XX_PHY
---help---
Currently supports the 6348 and 6358 PHYs.
+config BCM7XXX_PHY
+ tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
+ ---help---
+ Currently supports the BCM7366, BCM7439, BCM7445, and
+ 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
+
config BCM87XX_PHY
tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 9013dfa..07d2402 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
+obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
new file mode 100644
index 0000000..6aea6e2
--- /dev/null
+++ b/drivers/net/phy/bcm7xxx.c
@@ -0,0 +1,322 @@
+/*
+ * Broadcom BCM7xxx internal transceivers support.
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/brcmphy.h>
+
+static int bcm7445_config_init(struct phy_device *phydev)
+{
+ int ret;
+ const struct bcm7445_regs {
+ int reg;
+ u16 value;
+ } bcm7445_regs_cfg[] = {
+ /* increases ADC latency by 24ns */
+ { 0x17, 0x0038 },
+ { 0x15, 0xAB95 },
+ /* increases internal 1V LDO voltage by 5% */
+ { 0x17, 0x2038 },
+ { 0x15, 0xBB22 },
+ /* reduce RX low pass filter corner frequency */
+ { 0x17, 0x6038 },
+ { 0x15, 0xFFC5 },
+ /* reduce RX high pass filter corner frequency */
+ { 0x17, 0x003a },
+ { 0x15, 0x2002 },
+ };
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(bcm7445_regs_cfg); i++) {
+ ret = phy_write(phydev,
+ bcm7445_regs_cfg[i].reg,
+ bcm7445_regs_cfg[i].value);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void phy_write_exp(struct phy_device *phydev,
+ u16 reg, u16 value)
+{
+ phy_write(phydev, 0x17, 0xf00 | reg);
+ phy_write(phydev, 0x15, value);
+}
+
+static void phy_write_misc(struct phy_device *phydev,
+ u16 reg, u16 chl, u16 value)
+{
+ int tmp;
+
+ phy_write(phydev, 0x18, 0x7);
+
+ tmp = phy_read(phydev, 0x18);
+ tmp |= 0x800;
+ phy_write(phydev, 0x18, tmp);
+
+ tmp = (chl * 0x2000) | reg;
+ phy_write(phydev, 0x17, tmp);
+
+ phy_write(phydev, 0x15, value);
+}
+
+static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
+{
+ /* write AFE_RXCONFIG_0 */
+ phy_write_misc(phydev, 0x38, 0x0000, 0xeb19);
+
+ /* write AFE_RXCONFIG_1 */
+ phy_write_misc(phydev, 0x38, 0x0001, 0x9a3f);
+
+ /* write AFE_RX_LP_COUNTER */
+ phy_write_misc(phydev, 0x38, 0x0003, 0x7fc7);
+
+ /* write AFE_HPF_TRIM_OTHERS */
+ phy_write_misc(phydev, 0x3A, 0x0000, 0x000b);
+
+ /* write AFTE_TX_CONFIG */
+ phy_write_misc(phydev, 0x39, 0x0000, 0x0800);
+
+ /* Increase VCO range to prevent unlocking problem of PLL at low
+ * temp
+ */
+ phy_write_misc(phydev, 0x0032, 0x0001, 0x0048);
+
+ /* Change Ki to 011 */
+ phy_write_misc(phydev, 0x0032, 0x0002, 0x021b);
+
+ /* Disable loading of TVCO buffer to bandgap, set bandgap trim
+ * to 111
+ */
+ phy_write_misc(phydev, 0x0033, 0x0000, 0x0e20);
+
+ /* Adjust bias current trim by -3 */
+ phy_write_misc(phydev, 0x000a, 0x0000, 0x690b);
+
+ /* Switch to CORE_BASE1E */
+ phy_write(phydev, 0x1e, 0xd);
+
+ /* Reset R_CAL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0010);
+
+ /* Disable Reset R_CAL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0000);
+
+ return 0;
+}
+
+static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = bcm7445_config_init(phydev);
+ if (ret)
+ return ret;
+
+ return bcm7xxx_28nm_afe_config_init(phydev);
+}
+
+static int phy_set_clr_bits(struct phy_device *dev, int location,
+ int set_mask, int clr_mask)
+{
+ int v, ret;
+
+ v = phy_read(dev, location);
+ if (v < 0)
+ return v;
+
+ v &= ~clr_mask;
+ v |= set_mask;
+
+ ret = phy_write(dev, location, v);
+ if (ret < 0)
+ return ret;
+
+ return v;
+}
+
+static int bcm7xxx_config_init(struct phy_device *phydev)
+{
+ /* Enable 64 clock MDIO */
+ phy_write(phydev, 0x1d, 0x1000);
+ phy_read(phydev, 0x1d);
+
+ /* Workaround only required for 100Mbits/sec */
+ if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR))
+ return 0;
+
+ /* set shadow mode 2 */
+ phy_set_clr_bits(phydev, 0x1f, 0x0004, 0x0004);
+
+ /* set iddq_clkbias */
+ phy_write(phydev, 0x14, 0x0F00);
+ udelay(10);
+
+ /* reset iddq_clkbias */
+ phy_write(phydev, 0x14, 0x0C00);
+
+ phy_write(phydev, 0x13, 0x7555);
+
+ /* reset shadow mode 2 */
+ phy_set_clr_bits(phydev, 0x1f, 0x0004, 0);
+
+ return 0;
+}
+
+/* Workaround for putting the PHY in IDDQ mode, required
+ * for all BCM7XXX PHYs
+ */
+static int bcm7xxx_suspend(struct phy_device *phydev)
+{
+ int ret;
+ const struct bcm7xxx_regs {
+ int reg;
+ u16 value;
+ } bcm7xxx_suspend_cfg[] = {
+ { 0x1f, 0x008b },
+ { 0x10, 0x01c0 },
+ { 0x14, 0x7000 },
+ { 0x1f, 0x000f },
+ { 0x10, 0x20d0 },
+ { 0x1f, 0x000b },
+ };
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) {
+ ret = phy_write(phydev,
+ bcm7xxx_suspend_cfg[i].reg,
+ bcm7xxx_suspend_cfg[i].value);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static struct phy_driver bcm7xxx_driver[] = {
+{
+ .phy_id = PHY_ID_BCM7366,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7366",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_afe_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_afe_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM7439,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7439",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_afe_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_afe_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM7445,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7445",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .name = "Broadcom BCM7XXX 28nm",
+ .phy_id = PHY_ID_BCM7XXX_28,
+ .phy_id_mask = PHY_BCM_OUI_MASK,
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_BCM_OUI_4,
+ .phy_id_mask = 0xffff0000,
+ .name = "Broadcom BCM7XXX 40nm",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_BCM_OUI_5,
+ .phy_id_mask = 0xffffff00,
+ .name = "Broadcom BCM7XXX 65nm",
+ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_dummy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+} };
+
+static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+ { PHY_ID_BCM7366, 0xfffffff0, },
+ { PHY_ID_BCM7439, 0xfffffff0, },
+ { PHY_ID_BCM7445, 0xfffffff0, },
+ { PHY_ID_BCM7XXX_28, 0xfffffc00 },
+ { PHY_BCM_OUI_4, 0xffff0000 },
+ { PHY_BCM_OUI_5, 0xffffff00 },
+ { }
+};
+
+static int __init bcm7xxx_phy_init(void)
+{
+ return phy_drivers_register(bcm7xxx_driver,
+ ARRAY_SIZE(bcm7xxx_driver));
+}
+
+static void __exit bcm7xxx_phy_exit(void)
+{
+ phy_drivers_unregister(bcm7xxx_driver,
+ ARRAY_SIZE(bcm7xxx_driver));
+}
+
+module_init(bcm7xxx_phy_init);
+module_exit(bcm7xxx_phy_exit);
+
+MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);
+
+MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom Corporation");
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 677b4f0..e9fc98d 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -13,10 +13,17 @@
#define PHY_ID_BCM5461 0x002060c0
#define PHY_ID_BCM57780 0x03625d90
+#define PHY_ID_BCM7366 0x600d8490
+#define PHY_ID_BCM7439 0x600d8480
+#define PHY_ID_BCM7445 0x600d8510
+#define PHY_ID_BCM7XXX_28 0x600d8400
+
#define PHY_BCM_OUI_MASK 0xfffffc00
#define PHY_BCM_OUI_1 0x00206000
#define PHY_BCM_OUI_2 0x0143bc00
#define PHY_BCM_OUI_3 0x03625c00
+#define PHY_BCM_OUI_4 0x600d0000
+#define PHY_BCM_OUI_5 0x03625e00
#define PHY_BCM_FLAGS_MODE_COPPER 0x00000001
@@ -31,6 +38,8 @@
#define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000
#define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000
#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000
+/* Broadcom BCM7xxx specific workarounds */
+#define PHY_BRCM_100MBPS_WAR 0x00010000
#define PHY_BCM_FLAGS_VALID 0x80000000
#endif /* _LINUX_BRCMPHY_H */
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists