netdev - Re: [PATCH] bonding: 802.3ad: make aggregator

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20140214191243.GA3173@localhost.localdomain>
Date:	Fri, 14 Feb 2014 17:12:43 -0200
From:	Flavio Leitner <fbl@...hat.com>
To:	Jiri Bohac <jiri@...a.cz>
Cc:	Jay Vosburgh <fubar@...ibm.com>,
	Veaceslav Falico <vfalico@...hat.com>,
	Andy Gospodarek <andy@...yhouse.net>, netdev@...r.kernel.org
Subject: Re: [PATCH] bonding: 802.3ad: make aggregator_identifier bond-private

On Fri, Feb 14, 2014 at 06:13:50PM +0100, Jiri Bohac wrote:
> aggregator_identifier is used to assign unique aggregator identifiers
> to aggregators of a bond during device enslaving.
> 
> aggregator_identifier is currently a global variable that is zeroed in
> bond_3ad_initialize().
> 
> This sequence will lead to duplicate aggregator identifiers for eth1 and eth3:
> 
> create bond0
> change bond0 mode to 802.3ad
> enslave eth0 to bond0 		//eth0 gets agg id 1
> enslave eth1 to bond0 		//eth1 gets agg id 2
> create bond1
> change bond1 mode to 802.3ad
> enslave eth2 to bond1		//aggregator_identifier is reset to 0
> 				//eth2 gets agg id 1
> enslave eth3 to bond0 		//eth3 gets agg id 2
> 
> Fix this by making aggregator_identifier private to the bond.

I don't see how you fix the duplicate agg id with this patch because
you initialize for each bond to 0, then use the same algo further on.
So, what is changing?

Actually, aggregator_identifier is a global variable to make sure the
counter is always increasing for new bonds.  So, the fix would be to
not reset it to zero, isn't it?

Thanks,
fbl 


> Signed-off-by: Jiri Bohac <jbohac@...e.cz>
> ---
>  drivers/net/bonding/bond_3ad.c | 6 ++----
>  drivers/net/bonding/bond_3ad.h | 1 +
>  2 files changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
> index 4ced594..dcf2ee8 100644
> --- a/drivers/net/bonding/bond_3ad.c
> +++ b/drivers/net/bonding/bond_3ad.c
> @@ -1806,8 +1806,6 @@ void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout)
>  	BOND_AD_INFO(bond).agg_select_timer = timeout;
>  }
>  
> -static u16 aggregator_identifier;
> -
>  /**
>   * bond_3ad_initialize - initialize a bond's 802.3ad parameters and structures
>   * @bond: bonding struct to work on
> @@ -1821,7 +1819,7 @@ void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
>  	if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr),
>  				bond->dev->dev_addr)) {
>  
> -		aggregator_identifier = 0;
> +		BOND_AD_INFO(bond).aggregator_identifier = 0;
>  
>  		BOND_AD_INFO(bond).system.sys_priority = 0xFFFF;
>  		BOND_AD_INFO(bond).system.sys_mac_addr = *((struct mac_addr *)bond->dev->dev_addr);
> @@ -1892,7 +1890,7 @@ int bond_3ad_bind_slave(struct slave *slave)
>  		ad_initialize_agg(aggregator);
>  
>  		aggregator->aggregator_mac_address = *((struct mac_addr *)bond->dev->dev_addr);
> -		aggregator->aggregator_identifier = (++aggregator_identifier);
> +		aggregator->aggregator_identifier = ++BOND_AD_INFO(bond).aggregator_identifier;
>  		aggregator->slave = slave;
>  		aggregator->is_active = 0;
>  		aggregator->num_of_ports = 0;
> diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
> index 5d91ad0..1f081c8 100644
> --- a/drivers/net/bonding/bond_3ad.h
> +++ b/drivers/net/bonding/bond_3ad.h
> @@ -253,6 +253,7 @@ struct ad_system {
>  struct ad_bond_info {
>  	struct ad_system system;	    /* 802.3ad system structure */
>  	u32 agg_select_timer;	    // Timer to select aggregator after all adapter's hand shakes
> +	u16 aggregator_identifier;
>  };
>  
>  struct ad_slave_info {
> 
> -- 
> Jiri Bohac
> e-mail/jabber: jiri@...a.cz
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html