netdev - Re: [PATCH v2] of_mdio: fix phy interrupt passing

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 18 Feb 2014 18:48:18 +0400
From:	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To:	Ben Dooks <ben.dooks@...ethink.co.uk>, grant.likely@...aro.org
CC:	linux-kernel@...ts.codethink.co.uk, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	linux-sh@...r.kernel.org
Subject: Re: [PATCH v2] of_mdio: fix phy interrupt passing

Hello.

On 18-02-2014 16:16, Ben Dooks wrote:

> The of_mdiobus_register_phy() is not setting phy->irq thus causing
> some drivers to incorrectly assume that the PHY does not have an
> IRQ associated with it. Not only do some drivers report no IRQ
> they do not install an interrupt handler for the PHY.

> Simplify the code setting irq and set the phy->irq at the same
> time so that we cover the following issues, which should cover
> all the cases the code will find:

> - Set phy->irq if node has irq property and mdio->irq is NULL
> - Set phy->irq if node has no irq and mdio->irq is not NULL
> - Leave phy->irq as PHY_POLL default if none of the above

> This fixes the issue:
>   net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI

> to the correct:
>   net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI

> Signed-off-by: Ben Dooks <ben.dooks@...ethink.co.uk>

> ---
> Since v1:
> 	- Updated phy->irq setting code
> 	- Deal with issue if mdio->irq array NULL

> Notes:

> It was discussed if this should be two patches, but we end up
> making enough changes in #2 the same area as #1 means that we
> basically rewrite #1 in #2. So keep it as 1 patch.
> ---
>   drivers/of/of_mdio.c | 16 +++++++++-------
>   1 file changed, 9 insertions(+), 7 deletions(-)

> diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
> index 875b7b6..46d95fc 100644
> --- a/drivers/of/of_mdio.c
> +++ b/drivers/of/of_mdio.c
[...]
> @@ -54,12 +54,14 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *chi
>   	if (!phy || IS_ERR(phy))
>   		return 1;
>
> -	if (mdio->irq) {
> -		prev_irq = mdio->irq[addr];
> -		mdio->irq[addr] =
> -			irq_of_parse_and_map(child, 0);
> -		if (!mdio->irq[addr])
> -			mdio->irq[addr] = prev_irq;
> +	rc = irq_of_parse_and_map(child, 0);
> +	if (rc > 0) {
> +		phy->irq = rc;
> +		if (mdio->irq)
> +			mdio->irq[addr] = rc;
> +	} else {
> +		if (mdio->irq)

    You could write that as *else if* and save a line of code...

> +			phy->irq = mdio->irq[addr];
>   	}

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html