netdev - Re: [PATCH] net: phy: add suspend

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAGVrzcaOSMQWJ69KHJ7TH0_BN9D-O4uoL=fLWDoE=xFdV4RJ4w@mail.gmail.com>
Date:	Mon, 24 Feb 2014 11:37:15 -0800
From:	Florian Fainelli <f.fainelli@...il.com>
To:	Andrew Lunn <andrew@...n.ch>
Cc:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
	David Miller <davem@...emloft.net>,
	netdev <netdev@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] net: phy: add suspend_halted module param

2014-02-24 11:15 GMT-08:00 Andrew Lunn <andrew@...n.ch>:
> On Sun, Feb 23, 2014 at 05:58:39PM +0100, Sebastian Hesselbarth wrote:
>> commit 1211ce53077164e0d34641d0ca5fb4d4a7574498
>>   ("net: phy: resume/suspend PHYs on attach/detach")
>> introduced a feature to suspend PHYs when entering halted state.
>>
>> Unfortunately, not all bootloaders properly power-up PHYs on reset
>> and fail to access ethernet because the PHY is still powered down.
>>
>> Therefore, we add a boolean module parameter suspend_halted with
>> default value of true. Disabling that parameter prevents PHYs from
>> being suspended when entering halted state.
>
> Hi Sebastian
>
> Am i doing something silly here?

Could the PHY be already suspended during your initial boot? If that
is the case, the first time we all phy_suspend() the flag is true, we
suspend it, and we never wake it again despite changing
suspend_halted. Does it work better if you specify this module
parameter on the initial kernel boot command-line?

>
> root@...p:/sys/module/libphy/parameters# cat suspend_halted
> Y
> root@...p:/sys/module/libphy/parameters# echo N > suspend_halted
> root@...p:/sys/module/libphy/parameters# cat suspend_halted
> N
> root@...p:/sys/module/libphy/parameters# reboot
> ...
> ...
>
> Net:   egiga0 [PRIME]
> Hit any key to stop autoboot:  0
> Send Cmd : 0x68 to UART1
> egiga0 no link
> Using egiga0 device
> TFTP from server 10.0.0.1; our IP address is 10.0.0.2
> Filename 'uImage-qnap'.
> Load address: 0x800000
> Loading: T T
>
> Does not seem to work.
>
>      Andrew



-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html