netdev - Re: [PATCH] net: phy: add suspend

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20140226182117.GB14907@lunn.ch>
Date:	Wed, 26 Feb 2014 19:21:17 +0100
From:	Andrew Lunn <andrew@...n.ch>
To:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Cc:	Andrew Lunn <andrew@...n.ch>, netdev@...r.kernel.org,
	Florian Fainelli <f.fainelli@...il.com>,
	David Miller <davem@...emloft.net>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] net: phy: add suspend_halted module param

On Tue, Feb 25, 2014 at 11:38:52PM +0100, Sebastian Hesselbarth wrote:
> On 02/24/2014 08:15 PM, Andrew Lunn wrote:
> >On Sun, Feb 23, 2014 at 05:58:39PM +0100, Sebastian Hesselbarth wrote:
> >>commit 1211ce53077164e0d34641d0ca5fb4d4a7574498
> >>   ("net: phy: resume/suspend PHYs on attach/detach")
> >>introduced a feature to suspend PHYs when entering halted state.
> >>
> >>Unfortunately, not all bootloaders properly power-up PHYs on reset
> >>and fail to access ethernet because the PHY is still powered down.
> >>
> >>Therefore, we add a boolean module parameter suspend_halted with
> >>default value of true. Disabling that parameter prevents PHYs from
> >>being suspended when entering halted state.
> >
> >Am i doing something silly here?
> >
> >root@...p:/sys/module/libphy/parameters# cat suspend_halted
> >Y
> >root@...p:/sys/module/libphy/parameters# echo N > suspend_halted
> >root@...p:/sys/module/libphy/parameters# cat suspend_halted
> >N
> >root@...p:/sys/module/libphy/parameters# reboot
> 
> Just to be sure, can you ifconfig up the interface before reboot?
> The PHY could already be powered-down, if the interface is down.
> 
> >...
> >...
> >
> >Net:   egiga0 [PRIME]
> >Hit any key to stop autoboot:  0
> >Send Cmd : 0x68 to UART1
> >egiga0 no link
> >Using egiga0 device
> >TFTP from server 10.0.0.1; our IP address is 10.0.0.2
> >Filename 'uImage-qnap'.
> >Load address: 0x800000
> >Loading: T T
> >
> >Does not seem to work.
> 
> I tested the patch on Topkick (w/ 88E1318S, 0x0141 0x0e90) which
> bootloader is also affected.
> 
> Both, libphy.suspend_halted=0 as kernel boot parameter and sysfs
> procedure above successfully prevent the PHY from being powered
> down. After reboot, u-boot tftpboot works as expected.

Hi Sebastian

I tested again, and it seems like i made an error. This patch does
actually fix the problem.

The u-boot on this device is somewhat broken, when it comes to
networking and tftpboot. It seems like if the auto negotiation is not
complete before the TFTP starts, it never works. There are no
retransmits of the RRQ message. If i ^C it and start again, it does
work.

As to the comment from davem about not using a kernel parameter. How
about turning it all around. Put a boolean parameter into DT PHY node
to indicate when it is safe to power down an idle phy?

   Andrew
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html