| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1393910304-4004-3-git-send-email-ast@plumgrid.com>
Date: Mon, 3 Mar 2014 21:18:23 -0800
From: Alexei Starovoitov <ast@...mgrid.com>
To: Daniel Borkmann <dborkman@...hat.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Ingo Molnar <mingo@...nel.org>, Will Drewry <wad@...omium.org>,
Steven Rostedt <rostedt@...dmis.org>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>,
"H. Peter Anvin" <hpa@...or.com>,
Hagen Paul Pfeifer <hagen@...u.net>,
Jesse Gross <jesse@...ira.com>,
Thomas Gleixner <tglx@...utronix.de>,
Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>,
Tom Zanussi <tom.zanussi@...ux.intel.com>,
Jovi Zhangwei <jovi.zhangwei@...il.com>,
Eric Dumazet <edumazet@...gle.com>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Frederic Weisbecker <fweisbec@...il.com>,
Arnaldo Carvalho de Melo <acme@...radead.org>,
Pekka Enberg <penberg@....fi>,
Arjan van de Ven <arjan@...radead.org>,
Christoph Hellwig <hch@...radead.org>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH v4 net-next 2/3] RFC: convert seccomp to use extended BPF
use sk_convert_filter() to convert seccomp BPF into extended BPF
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
--x86_64--
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
ext BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_ext
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386---
old BPF: 5.4 sec
ext BPF: 3.8 sec
BPF filters generated by seccomp are very branchy, so ext BPF
performance is better than old BPF.
Performance gains will be even higher when extended BPF JIT
is committed.
Signed-off-by: Alexei Starovoitov <ast@...mgrid.com>
---
This patch is an RFC to use extended BPF in seccomp.
Change it to do it conditionally with bpf_ext_enable knob ?
---
include/linux/seccomp.h | 1 -
kernel/seccomp.c | 112 +++++++++++++++++++++--------------------------
net/core/filter.c | 5 ---
3 files changed, 51 insertions(+), 67 deletions(-)
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 6f19cfd1840e..4054b0994071 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -76,7 +76,6 @@ static inline int seccomp_mode(struct seccomp *s)
#ifdef CONFIG_SECCOMP_FILTER
extern void put_seccomp_filter(struct task_struct *tsk);
extern void get_seccomp_filter(struct task_struct *tsk);
-extern u32 seccomp_bpf_load(int off);
#else /* CONFIG_SECCOMP_FILTER */
static inline void put_seccomp_filter(struct task_struct *tsk)
{
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index b7a10048a32c..346c597b44cc 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -55,60 +55,27 @@ struct seccomp_filter {
atomic_t usage;
struct seccomp_filter *prev;
unsigned short len; /* Instruction count */
- struct sock_filter insns[];
+ struct sock_filter_ext insns[];
};
/* Limit any path through the tree to 256KB worth of instructions. */
#define MAX_INSNS_PER_PATH ((1 << 18) / sizeof(struct sock_filter))
-/**
- * get_u32 - returns a u32 offset into data
- * @data: a unsigned 64 bit value
- * @index: 0 or 1 to return the first or second 32-bits
- *
- * This inline exists to hide the length of unsigned long. If a 32-bit
- * unsigned long is passed in, it will be extended and the top 32-bits will be
- * 0. If it is a 64-bit unsigned long, then whatever data is resident will be
- * properly returned.
- *
+/*
* Endianness is explicitly ignored and left for BPF program authors to manage
* as per the specific architecture.
*/
-static inline u32 get_u32(u64 data, int index)
-{
- return ((u32 *)&data)[index];
-}
-
-/* Helper for bpf_load below. */
-#define BPF_DATA(_name) offsetof(struct seccomp_data, _name)
-/**
- * bpf_load: checks and returns a pointer to the requested offset
- * @off: offset into struct seccomp_data to load from
- *
- * Returns the requested 32-bits of data.
- * seccomp_check_filter() should assure that @off is 32-bit aligned
- * and not out of bounds. Failure to do so is a BUG.
- */
-u32 seccomp_bpf_load(int off)
+static void populate_seccomp_data(struct seccomp_data *sd)
{
struct pt_regs *regs = task_pt_regs(current);
- if (off == BPF_DATA(nr))
- return syscall_get_nr(current, regs);
- if (off == BPF_DATA(arch))
- return syscall_get_arch(current, regs);
- if (off >= BPF_DATA(args[0]) && off < BPF_DATA(args[6])) {
- unsigned long value;
- int arg = (off - BPF_DATA(args[0])) / sizeof(u64);
- int index = !!(off % sizeof(u64));
- syscall_get_arguments(current, regs, arg, 1, &value);
- return get_u32(value, index);
- }
- if (off == BPF_DATA(instruction_pointer))
- return get_u32(KSTK_EIP(current), 0);
- if (off == BPF_DATA(instruction_pointer) + sizeof(u32))
- return get_u32(KSTK_EIP(current), 1);
- /* seccomp_check_filter should make this impossible. */
- BUG();
+ int i;
+
+ sd->nr = syscall_get_nr(current, regs);
+ sd->arch = syscall_get_arch(current, regs);
+ for (i = 0; i < 6; i++)
+ syscall_get_arguments(current, regs, i, 1,
+ (unsigned long *)&sd->args[i]);
+ sd->instruction_pointer = KSTK_EIP(current);
}
/**
@@ -133,17 +100,17 @@ static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen)
switch (code) {
case BPF_S_LD_W_ABS:
- ftest->code = BPF_S_ANC_SECCOMP_LD_W;
+ ftest->code = BPF_LDX | BPF_W | BPF_ABS;
/* 32-bit aligned and not out of bounds. */
if (k >= sizeof(struct seccomp_data) || k & 3)
return -EINVAL;
continue;
case BPF_S_LD_W_LEN:
- ftest->code = BPF_S_LD_IMM;
+ ftest->code = BPF_LD | BPF_IMM;
ftest->k = sizeof(struct seccomp_data);
continue;
case BPF_S_LDX_W_LEN:
- ftest->code = BPF_S_LDX_IMM;
+ ftest->code = BPF_LDX | BPF_IMM;
ftest->k = sizeof(struct seccomp_data);
continue;
/* Explicitly include allowed calls. */
@@ -185,6 +152,7 @@ static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen)
case BPF_S_JMP_JGT_X:
case BPF_S_JMP_JSET_K:
case BPF_S_JMP_JSET_X:
+ sk_decode_filter(ftest, ftest);
continue;
default:
return -EINVAL;
@@ -202,18 +170,21 @@ static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen)
static u32 seccomp_run_filters(int syscall)
{
struct seccomp_filter *f;
+ struct seccomp_data sd;
u32 ret = SECCOMP_RET_ALLOW;
/* Ensure unexpected behavior doesn't result in failing open. */
if (WARN_ON(current->seccomp.filter == NULL))
return SECCOMP_RET_KILL;
+ populate_seccomp_data(&sd);
+
/*
* All filters in the list are evaluated and the lowest BPF return
* value always takes priority (ignoring the DATA).
*/
for (f = current->seccomp.filter; f; f = f->prev) {
- u32 cur_ret = sk_run_filter(NULL, f->insns);
+ u32 cur_ret = sk_run_filter_ext(&sd, f->insns);
if ((cur_ret & SECCOMP_RET_ACTION) < (ret & SECCOMP_RET_ACTION))
ret = cur_ret;
}
@@ -231,6 +202,8 @@ static long seccomp_attach_filter(struct sock_fprog *fprog)
struct seccomp_filter *filter;
unsigned long fp_size = fprog->len * sizeof(struct sock_filter);
unsigned long total_insns = fprog->len;
+ struct sock_filter *fp;
+ int new_len;
long ret;
if (fprog->len == 0 || fprog->len > BPF_MAXINSNS)
@@ -252,28 +225,42 @@ static long seccomp_attach_filter(struct sock_fprog *fprog)
CAP_SYS_ADMIN) != 0)
return -EACCES;
- /* Allocate a new seccomp_filter */
- filter = kzalloc(sizeof(struct seccomp_filter) + fp_size,
- GFP_KERNEL|__GFP_NOWARN);
- if (!filter)
+ fp = kzalloc(fp_size, GFP_KERNEL|__GFP_NOWARN);
+ if (!fp)
return -ENOMEM;
- atomic_set(&filter->usage, 1);
- filter->len = fprog->len;
/* Copy the instructions from fprog. */
ret = -EFAULT;
- if (copy_from_user(filter->insns, fprog->filter, fp_size))
- goto fail;
+ if (copy_from_user(fp, fprog->filter, fp_size))
+ goto free_prog;
/* Check and rewrite the fprog via the skb checker */
- ret = sk_chk_filter(filter->insns, filter->len);
+ ret = sk_chk_filter(fp, fprog->len);
if (ret)
- goto fail;
+ goto free_prog;
/* Check and rewrite the fprog for seccomp use */
- ret = seccomp_check_filter(filter->insns, filter->len);
+ ret = seccomp_check_filter(fp, fprog->len);
if (ret)
- goto fail;
+ goto free_prog;
+
+ /* convert 'sock_filter' insns to 'sock_filter_ext' insns */
+ ret = sk_convert_filter(fp, fprog->len, NULL, &new_len);
+ if (ret)
+ goto free_prog;
+
+ /* Allocate a new seccomp_filter */
+ filter = kzalloc(sizeof(struct seccomp_filter) +
+ sizeof(struct sock_filter_ext) * new_len,
+ GFP_KERNEL|__GFP_NOWARN);
+ if (!filter)
+ goto free_prog;
+
+ ret = sk_convert_filter(fp, fprog->len, filter->insns, &new_len);
+ if (ret)
+ goto free_filter;
+ atomic_set(&filter->usage, 1);
+ filter->len = new_len;
/*
* If there is an existing filter, make it the prev and don't drop its
@@ -282,8 +269,11 @@ static long seccomp_attach_filter(struct sock_fprog *fprog)
filter->prev = current->seccomp.filter;
current->seccomp.filter = filter;
return 0;
-fail:
+
+free_filter:
kfree(filter);
+free_prog:
+ kfree(fp);
return ret;
}
diff --git a/net/core/filter.c b/net/core/filter.c
index 1494421486b7..f144a6a7d939 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -388,11 +388,6 @@ load_b:
A = 0;
continue;
}
-#ifdef CONFIG_SECCOMP_FILTER
- case BPF_S_ANC_SECCOMP_LD_W:
- A = seccomp_bpf_load(fentry->k);
- continue;
-#endif
default:
WARN_RATELIMIT(1, "Unknown code:%u jt:%u tf:%u k:%u\n",
fentry->code, fentry->jt,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists