lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <201403181931.s2IJVLPA016342@lab1.dls>
Date:	Tue, 18 Mar 2014 15:31:21 -0400
From:	David L Stevens <dlstevens@...ibm.com>
To:	David Miller <davem@...emloft.net>,
	Stephen Hemminger <shemminger@...tta.com>,
	Cong Wang <amwang@...hat.com>
cc:	netdev@...r.kernel.org
Subject: [PATCHv4 net-next] VXLAN: fix nonfunctional neigh_reduce


	The VXLAN neigh_reduce() code is completely non-functional since
check-in. Specific errors:

1) The original code drops all packets with a multicast destination address,
	even though neighbor solicitations are sent to the solicited-node
	address, a multicast address. The code after this check was never run.
2) The neighbor table lookup used the IPv6 header destination, which is the
	solicited node address, rather than the target address from the
	neighbor solicitation. So neighbor lookups would always fail if it
	got this far. Also for L3MISSes.
3) The code calls ndisc_send_na(), which does a send on the tunnel device.
	The context for neigh_reduce() is the transmit path, vxlan_xmit(),
	where the host or a bridge-attached neighbor is trying to transmit
	a neighbor solicitation. To respond to it, the tunnel endpoint needs
	to do a *receive* of the appropriate neighbor advertisement. Doing a
	send, would only try to send the advertisement, encapsulated, to the
	remote destinations in the fdb -- hosts that definitely did not do the
	corresponding solicitation.
4) The code uses the tunnel endpoint IPv6 forwarding flag to determine the
	isrouter flag in the advertisement. This has nothing to do with whether
	or not the target is a router, and generally won't be set since the
	tunnel endpoint is bridging, not routing, traffic.

	The patch below creates a proxy neighbor advertisement to respond to
neighbor solicitions as intended, providing proper IPv6 support for neighbor
reduction.

Changes since v3:
	- code cleanup suggested by Brian Haley
Changes since v2:
	- code cleanup suggested by Stephen Hemminger and Daniel Baluta
Changes since v1:
	- reworked code to be structurally similar to arp_reduce()

Signed-Off-By: David L Stevens <dlstevens@...ibm.com>

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index eb59b14..b967388 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1336,15 +1336,104 @@ out:
 }
 
 #if IS_ENABLED(CONFIG_IPV6)
+
+static struct sk_buff *vxlan_na_create(struct sk_buff *request,
+	struct neighbour *n, bool isrouter)
+{
+	struct net_device *dev = request->dev;
+	struct sk_buff *reply;
+	struct nd_msg *ns, *na;
+	struct ipv6hdr *pip6;
+	u8 *daddr;
+	int olen = 8; /* opt hdr + ETH_ALEN for target */
+	int i, len;
+
+	if (dev == NULL)
+		return NULL;
+
+
+	len = LL_RESERVED_SPACE(dev) + sizeof(struct ipv6hdr) +
+		sizeof(*na) + olen + dev->needed_tailroom;
+	reply = alloc_skb(len, GFP_ATOMIC);
+	if (reply == NULL)
+		return NULL;
+
+	reply->protocol = htons(ETH_P_IPV6);
+	reply->dev = dev;
+	skb_reserve(reply, LL_RESERVED_SPACE(request->dev));
+	skb_push(reply, sizeof(struct ethhdr));
+	skb_set_mac_header(reply, 0);
+
+	ns = (struct nd_msg *)skb_transport_header(request);
+
+	daddr = eth_hdr(request)->h_source;
+	olen = request->len - skb_transport_offset(request) - sizeof(*ns);
+	for (i = 0; i < olen-1; i += (ns->opt[i+1]<<3)) {
+		if (ns->opt[i] == ND_OPT_SOURCE_LL_ADDR) {
+			daddr = ns->opt + i + sizeof(struct nd_opt_hdr);
+			break;
+		}
+	}
+
+	/* Ethernet header */
+	ether_addr_copy(eth_hdr(reply)->h_dest, daddr);
+	ether_addr_copy(eth_hdr(reply)->h_source, n->ha);
+	eth_hdr(reply)->h_proto = htons(ETH_P_IPV6);
+	reply->protocol = htons(ETH_P_IPV6);
+
+	skb_pull(reply, sizeof(struct ethhdr));
+	skb_set_network_header(reply, 0);
+	skb_put(reply, sizeof(struct ipv6hdr));
+
+	/* IPv6 header */
+
+	pip6 = ipv6_hdr(reply);
+	memset(pip6, 0, sizeof(struct ipv6hdr));
+	pip6->version = 6;
+	pip6->priority = ipv6_hdr(request)->priority;
+	pip6->nexthdr = IPPROTO_ICMPV6;
+	pip6->hop_limit = 255;
+	pip6->daddr = ipv6_hdr(request)->saddr;
+	pip6->saddr = *(struct in6_addr *)n->primary_key;
+
+	skb_pull(reply, sizeof(struct ipv6hdr));
+	skb_set_transport_header(reply, 0);
+
+	olen = 8; /* ND_OPT_TARGET_LL_ADDR */
+	na = (struct nd_msg *)skb_put(reply, sizeof(*na) + olen);
+
+	/* Neighbor Advertisement */
+	memset(na, 0, sizeof(*na)+olen);
+	na->icmph.icmp6_type = NDISC_NEIGHBOUR_ADVERTISEMENT;
+	na->icmph.icmp6_router = isrouter;
+	na->icmph.icmp6_override = 1;
+	na->icmph.icmp6_solicited = 1;
+	na->target = ns->target;
+	ether_addr_copy(&na->opt[2], n->ha);
+	na->opt[0] = ND_OPT_TARGET_LL_ADDR;
+	na->opt[1] = 1; /* 8 bytes */
+
+	na->icmph.icmp6_cksum = csum_ipv6_magic(&pip6->saddr,
+		&pip6->daddr, sizeof(*na)+olen, IPPROTO_ICMPV6, 
+		csum_partial(na, sizeof(*na)+olen, 0));
+
+	pip6->payload_len = htons(sizeof(*na)+olen);
+
+	skb_push(reply, sizeof(struct ipv6hdr));
+
+	reply->ip_summed = CHECKSUM_UNNECESSARY;
+
+	return reply;
+}
+
 static int neigh_reduce(struct net_device *dev, struct sk_buff *skb)
 {
 	struct vxlan_dev *vxlan = netdev_priv(dev);
-	struct neighbour *n;
-	union vxlan_addr ipa;
+	struct nd_msg *msg;
 	const struct ipv6hdr *iphdr;
 	const struct in6_addr *saddr, *daddr;
-	struct nd_msg *msg;
-	struct inet6_dev *in6_dev = NULL;
+	struct neighbour *n;
+	struct inet6_dev *in6_dev;
 
 	in6_dev = __in6_dev_get(dev);
 	if (!in6_dev)
@@ -1357,8 +1446,7 @@ static int neigh_reduce(struct net_device *dev, struct sk_buff *skb)
 	saddr = &iphdr->saddr;
 	daddr = &iphdr->daddr;
 
-	if (ipv6_addr_loopback(daddr) ||
-	    ipv6_addr_is_multicast(daddr))
+	if (ipv6_addr_loopback(daddr))
 		goto out;
 
 	msg = (struct nd_msg *)skb_transport_header(skb);
@@ -1366,10 +1454,11 @@ static int neigh_reduce(struct net_device *dev, struct sk_buff *skb)
 	    msg->icmph.icmp6_type != NDISC_NEIGHBOUR_SOLICITATION)
 		goto out;
 
-	n = neigh_lookup(ipv6_stub->nd_tbl, daddr, dev);
+	n = neigh_lookup(ipv6_stub->nd_tbl, &msg->target, dev);
 
 	if (n) {
 		struct vxlan_fdb *f;
+		struct sk_buff *reply;
 
 		if (!(n->nud_state & NUD_CONNECTED)) {
 			neigh_release(n);
@@ -1383,13 +1472,23 @@ static int neigh_reduce(struct net_device *dev, struct sk_buff *skb)
 			goto out;
 		}
 
-		ipv6_stub->ndisc_send_na(dev, n, saddr, &msg->target,
-					 !!in6_dev->cnf.forwarding,
-					 true, false, false);
+		reply = vxlan_na_create(skb, n,
+					!!(f ? f->flags & NTF_ROUTER : 0));
+
 		neigh_release(n);
+
+		if (reply == NULL)
+			goto out;
+
+		if (netif_rx_ni(reply) == NET_RX_DROP)
+			dev->stats.rx_dropped++;
+
 	} else if (vxlan->flags & VXLAN_F_L3MISS) {
-		ipa.sin6.sin6_addr = *daddr;
-		ipa.sa.sa_family = AF_INET6;
+		union vxlan_addr ipa = {
+			.sin6.sin6_addr = msg->target,
+			.sa.sa_family = AF_INET6,
+		};
+
 		vxlan_ip_miss(dev, &ipa);
 	}
 

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ