| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CBA48B605613B640864883107238931C10D4A6@nice.asicdesigners.com>
Date: Wed, 19 Mar 2014 22:54:22 +0000
From: Dimitrios Michailidis <dm@...lsio.com>
To: Thadeu Lima de Souza Cascardo <cascardo@...ux.vnet.ibm.com>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Casey Leedom <leedom@...lsio.com>
Subject: RE: [PATCH] cxgb4: fix probe when already with invalid parameters
Thadeu Lima de Souza Cascardo wrote:
> On Wed, Mar 19, 2014 at 09:38:49PM +0000, Dimitrios Michailidis wrote:
> > Thadeu Lima de Souza Cascardo wrote:
> > > Since commit 636f9d371f70f22961fd598fe18380057518ca31 ("cxgb4: Add
> > > support for T4 configuration file"), we have problems when probing the
> > > device, and finding out it's already initialized, but does not have
> > > valid buffer sizes setup.
> > >
> > > This may happen with kexec without shutdown, or bad firmware or
> > > bootloader.
> > >
> > > The usual symptom is that probe fails:
> > >
> > > [ 2.605494] cxgb4 0000:50:00.4: Coming up as MASTER: Adapter already
> > > initialized
> > > [ 2.605511] cxgb4 0000:50:00.4: bad SGE FL page buffer sizes [0, 0]
> > > [ 2.625629] cxgb4: probe of 0000:50:00.4 failed with error -22
> > >
> > > The solution is to treat the adapter as not initialized in case the
> > > parameters are invalid.
> >
> > The patch doesn't look right to me. Besides reinitializing the device when it
> finds
> > disagreeable settings it disregards that this PF may not be in charge of the
> device.
> > If the controlling PF (what the code calls master) selects values this PF doesn't
> like
> > with the patch it will elevate itself to master and install its own preferences.
> >
> > Also not right of course is that FW is claiming the device is initialized when
> clearly it isn't.
> > Can you tell me which FW version is involved here and what steps got the
> device in this state?
> >
>
> We are trying to netboot, so it's possibly a problem on the Open
> Firmware driver that makes it not send FW BYE before handling the CPU to
> the bootloader. I could easily reproduce a similar situation by removing
> the call to t4_fw_bye during the driver remove path, and reloading the
> driver without commit 940d9d34a5467c2e2574866eb009d4cb61e27299
> ("cxgb4:
> allow large buffer size to have page size").
>
> The firmware I am using is:
> firmware-version: 1.9.23.0, TP 0.1.9.1
Thanks for the info.
> How about the change below?
The problem with this one is once FW decides the device is initialized and ready for use
it can let in secondary PFs. They'll get unhappy when you reset the device under them to
change the settings. Here FW has put this PF in charge but also asked it not to change anything
while the device isn't really fully initialized.
> If that's OK, I'll send a v2.
>
> Cascardo.
>
>
> > > Signed-off-by: Thadeu Lima de Souza Cascardo
> <cascardo@...ux.vnet.ibm.com>
> > > ---
> > > drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 34 +++++++++++++----
> -----
> > > 1 files changed, 20 insertions(+), 14 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
> > > b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
> > > index 34e2488..d0638f9 100644
> > > --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
> > > +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
> > > @@ -5237,13 +5237,27 @@ static int adap_init0(struct adapter *adap)
> > > * master initialization), note that we're living with existing
> > > * adapter parameters. Otherwise, it's time to try initializing the
> > > * adapter ...
> > > + *
> > > + * If we're living with non-hard-coded parameters (either from a
> > > + * Firmware Configuration File or values programmed by a different PF
> > > + * Driver), give the SGE code a chance to pull in anything that it
> > > + * needs ... Note that this must be called after we retrieve our VPD
> > > + * parameters in order to know how to convert core ticks to seconds.
> > > */
> > > if (state == DEV_STATE_INIT) {
> > > dev_info(adap->pdev_dev, "Coming up as %s: "\
> > > "Adapter already initialized\n",
> > > adap->flags & MASTER_PF ? "MASTER" : "SLAVE");
> > > adap->flags |= USING_SOFT_PARAMS;
> > > - } else {
> > > + ret = t4_sge_init(adap);
> > > + if (ret == -EINVAL) {
>
> - if (ret == -EINVAL) {
> + if (ret == -EINVAL && adap->flags & MASTER_PF) {
>
> > > + adap->flags &= ~USING_SOFT_PARAMS;
> > > + state = DEV_STATE_UNINIT;
> > > + } else if (ret < 0) {
> > > + goto bye;
> > > + }
> > > + }
> > > + if (state != DEV_STATE_INIT) {
> > > dev_info(adap->pdev_dev, "Coming up as MASTER: "\
> > > "Initializing adapter\n");
> > >
> > > @@ -5300,19 +5314,11 @@ static int adap_init0(struct adapter *adap)
> > > -ret);
> > > goto bye;
> > > }
> > > - }
> > > -
> > > - /*
> > > - * If we're living with non-hard-coded parameters (either from a
> > > - * Firmware Configuration File or values programmed by a different PF
> > > - * Driver), give the SGE code a chance to pull in anything that it
> > > - * needs ... Note that this must be called after we retrieve our VPD
> > > - * parameters in order to know how to convert core ticks to seconds.
> > > - */
> > > - if (adap->flags & USING_SOFT_PARAMS) {
> > > - ret = t4_sge_init(adap);
> > > - if (ret < 0)
> > > - goto bye;
> > > + if (adap->flags & USING_SOFT_PARAMS) {
> > > + ret = t4_sge_init(adap);
> > > + if (ret < 0)
> > > + goto bye;
> > > + }
> > > }
> > >
> > > if (is_bypass_device(adap->pdev->device))
> > > --
> > > 1.7.1
> >
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists