| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7c06cd07-529f-431c-96ef-f1cf925e21c1@mary.at.omicron.at>
Date: Mon, 24 Mar 2014 13:46:27 +0100
From: Christian Riesch <christian.riesch@...cron.at>
To: <netdev@...r.kernel.org>
CC: Florian Fainelli <f.fainelli@...il.com>,
Prabhakar Lad <prabhakar.csengg@...il.com>,
Mugunthan V N <mugunthanvnm@...com>,
David Miller <davem@...emloft.net>,
Grygorii Strashko <grygorii.strashko@...com>,
Jon Ringle <jon@...gle.org>,
<davinci-linux-open-source@...ux.davincidsp.com>,
Christian Riesch <christian.riesch@...cron.at>
Subject: [PATCH v2 2/2] net: davinci_emac: Fix rollback of emac_dev_open()
If an error occurs during the initialization in emac_dev_open() (the
driver's ndo_open function), interrupts, DMA descriptors etc. must be freed.
The current rollback code is buggy in several ways.
1) Freeing the interrupts. The current code will not free all interrupts
that were requested by the driver. Furthermore, the code tries to do a
platform_get_resource(priv->pdev, IORESOURCE_IRQ, -1) in its last
iteration.
This patch fixes these bugs.
2) Wrong order of err: and rollback: labels. If the setup of the PHY in
the code fails, the interrupts that have been requested before are
not freed:
request irq
if requesting irqs fails, goto rollback
setup phy
if phy setup fails, goto err
return 0
rollback:
free irqs
err:
This patch brings the code into the correct order.
3) The code calls napi_enable() and emac_int_enable(), but does not
undo both in case of an error.
This patch adds calls of emac_int_disable() and napi_disable() to the
rollback code.
4) RX DMA descriptors are not freed in case of an error: Right before
requesting the irqs, the function creates DMA descriptors for the
RX channel. These RX descriptors are never freed when we jump to either
rollback or err.
This patch adds code for freeing the DMA descriptors in the case of
an initialization error. This required a modification of
cpdma_ctrl_stop() in davinci_cpdma.c: We must be able to call this
function to free the DMA descriptors while the DMA channels are
in IDLE state (before cpdma_ctlr_start() was called).
Tested on a custom board with the Texas Instruments AM1808.
Signed-off-by: Christian Riesch <christian.riesch@...cron.at>
---
drivers/net/ethernet/ti/davinci_cpdma.c | 4 +--
drivers/net/ethernet/ti/davinci_emac.c | 44 ++++++++++++++++++++-----------
2 files changed, 31 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index 364d0c7..88ef270 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -355,7 +355,7 @@ int cpdma_ctlr_stop(struct cpdma_ctlr *ctlr)
int i;
spin_lock_irqsave(&ctlr->lock, flags);
- if (ctlr->state != CPDMA_STATE_ACTIVE) {
+ if (ctlr->state == CPDMA_STATE_TEARDOWN) {
spin_unlock_irqrestore(&ctlr->lock, flags);
return -EINVAL;
}
@@ -891,7 +891,7 @@ int cpdma_chan_stop(struct cpdma_chan *chan)
unsigned timeout;
spin_lock_irqsave(&chan->lock, flags);
- if (chan->state != CPDMA_STATE_ACTIVE) {
+ if (chan->state == CPDMA_STATE_TEARDOWN) {
spin_unlock_irqrestore(&chan->lock, flags);
return -EINVAL;
}
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 2514304..8f0e69c 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1533,8 +1533,8 @@ static int emac_dev_open(struct net_device *ndev)
u32 cnt;
struct resource *res;
int q, m, ret;
+ int res_num = 0, irq_num = 0;
int i = 0;
- int k = 0;
struct emac_priv *priv = netdev_priv(ndev);
pm_runtime_get(&priv->pdev->dev);
@@ -1564,14 +1564,24 @@ static int emac_dev_open(struct net_device *ndev)
}
/* Request IRQ */
+ while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ,
+ res_num))) {
+ for (irq_num = res->start; irq_num <= res->end; irq_num++) {
+ dev_err(emac_dev, "Request IRQ %d\n", irq_num);
+ if (request_irq(irq_num, emac_irq, 0, ndev->name,
+ ndev)) {
+ dev_err(emac_dev,
+ "DaVinci EMAC: request_irq() failed\n");
+ ret = -EBUSY;
- while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
- for (i = res->start; i <= res->end; i++) {
- if (request_irq(i, emac_irq, 0, ndev->name, ndev))
goto rollback;
+ }
}
- k++;
+ res_num++;
}
+ /* prepare counters for rollback in case of an error */
+ res_num--;
+ irq_num--;
/* Start/Enable EMAC hardware */
emac_hw_enable(priv);
@@ -1638,19 +1648,23 @@ static int emac_dev_open(struct net_device *ndev)
return 0;
-rollback:
-
- dev_err(emac_dev, "DaVinci EMAC: request_irq() failed");
+err:
+ emac_int_disable(priv);
+ napi_disable(&priv->napi);
- for (q = k; k >= 0; k--) {
- for (m = i; m >= res->start; m--)
+rollback:
+ for (q = res_num; q >= 0; q--) {
+ res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, q);
+ /* at the first iteration, irq_num is already set to the
+ * right value
+ */
+ if (q != res_num)
+ irq_num = res->end;
+
+ for (m = irq_num; m >= res->start; m--)
free_irq(m, ndev);
- res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1);
- m = res->end;
}
-
- ret = -EBUSY;
-err:
+ cpdma_ctlr_stop(priv->dma);
pm_runtime_put(&priv->pdev->dev);
return ret;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists