[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1395812357.3726.14.camel@joe-AO722>
Date: Tue, 25 Mar 2014 22:39:17 -0700
From: Joe Perches <joe@...ches.com>
To: Kedareswara rao Appana <appana.durga.rao@...inx.com>
Cc: wg@...ndegger.com, mkl@...gutronix.de, michal.simek@...inx.com,
grant.likely@...aro.org, robh+dt@...nel.org,
linux-can@...r.kernel.org, netdev@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Kedareswara rao Appana <appanad@...inx.com>
Subject: Re: [PATCH v6] can: xilinx CAN controller support
On Wed, 2014-03-26 at 10:56 +0530, Kedareswara rao Appana wrote:
> This patch adds xilinx CAN controller support.
> This driver supports both ZYNQ CANPS and Soft IP
> AXI CAN controller.
Just trivial notes about dmesg logging output.
> diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
[]
> +static int set_reset_mode(struct net_device *ndev)
> +{
[]
> + netdev_warn(ndev, "timedout waiting for config mode\n");
timed out
> +static int xcan_set_bittiming(struct net_device *ndev)
> +{
[]
> + if (!is_config_mode) {
> + netdev_alert(ndev,
> + "BUG! Cannot set bittiming can is notin config mode\n");
"Cannot set bit timing - CAN is not in config mode\n"
> +static int xcan_chip_start(struct net_device *ndev)
> +{
> + netdev_warn(ndev,
> + "time out waiting for correct mode\n");
Please be consistent. Maybe
"timed out waiting for correct mode\n"
> +static int xcan_open(struct net_device *ndev)
> +{
> + struct xcan_priv *priv = netdev_priv(ndev);
> + int ret;
> +
> + ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
> + ndev->name, ndev);
> + if (ret < 0) {
> + netdev_err(ndev, "Irq allocation for CAN failed\n");
irq is almost always lower case.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists