[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1397702368-4846-3-git-send-email-isubramanian@apm.com>
Date: Wed, 16 Apr 2014 19:39:26 -0700
From: Iyappan Subramanian <isubramanian@....com>
To: davem@...emloft.net, netdev@...r.kernel.org,
devicetree@...r.kernel.org
Cc: gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, jcm@...hat.com,
patches@....com, Iyappan Subramanian <isubramanian@....com>,
Ravi Patel <rapatel@....com>, Keyur Chudgar <kchudgar@....com>
Subject: [PATCH v3 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
This patch adds documentation for APM X-Gene SoC ethernet DTS binding.
Signed-off-by: Iyappan Subramanian <isubramanian@....com>
Signed-off-by: Ravi Patel <rapatel@....com>
Signed-off-by: Keyur Chudgar <kchudgar@....com>
---
.../devicetree/bindings/net/apm-xgene-enet.txt | 66 ++++++++++++++++++++
1 file changed, 66 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
new file mode 100644
index 0000000..9ad6fe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
@@ -0,0 +1,66 @@
+APM X-Gene SoC Ethernet nodes
+
+Ethernet nodes are defined to describe on-chip ethernet interfaces in
+APM X-Gene SoC.
+
+Required properties:
+- compatible: Should be "apm,xgene-enet"
+- reg: First resource is the ethernet base register set
+ Second resource is the ring base register set
+ Third resource is the ring command register set
+- interrupts: Ethernet main interrupt
+- clocks: Reference to the clock entry.
+- local-mac-address: Ethernet MAC address.
+- phy-connection-type: Ethernet MII mode.
+
+- mdio device tree subnode: When the X-Gene SoC has a phy connected to its local
+ mdio, there must be device tree subnode with the following
+ required properties:
+
+ - compatible: Must be "apm,xgene-mdio".
+ - #address-cells: Must be <1>.
+ - #size-cells: Must be <0>.
+
+ For the phy on the mdio bus, there must be a node with the following
+ fields:
+
+ - reg: phy id used to communicate to phy.
+
+Optional properties:
+- status : Should be "ok" or "disabled" for enabled/disabled.
+ Default is "ok".
+
+Example:
+ menetclk: menetclk {
+ compatible = "apm,xgene-device-clock";
+ clock-output-names = "menetclk";
+ status = "ok";
+ };
+
+ menet: ethernet@...20000 {
+ compatible = "apm,xgene-enet";
+ status = "disabled";
+ reg = <0x0 0x17020000 0x0 0xd100>,
+ <0x0 0X17030000 0x0 0X400>,
+ <0x0 0X10000000 0x0 0X200>;
+ interrupts = <0x0 0x3c 0x4>;
+ clocks = <&menetclk 0>;
+ local-mac-address = [00 01 73 00 00 01];
+ phy-connection-type = "rgmii";
+ phy-handle = <&menetphy>;
+ mdio {
+ compatible = "apm,xgene-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ menetphy: menetphy@3 {
+ reg = <0x3>;
+ };
+
+ };
+ };
+
+/* Board-specific peripheral configurations */
+
+&menet {
+ status = "ok";
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists