netdev - [PATCH RFC 1/2] Documentation: add Device tree bindings for QCA7000

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1398707697-43785-2-git-send-email-stefan.wahren@i2se.com>
Date:	Mon, 28 Apr 2014 19:54:56 +0200
From:	Stefan Wahren <stefan.wahren@...e.com>
To:	davem@...emloft.net, robh+dt@...nel.org, pawel.moll@....org,
	mark.rutland@....org, ijc+devicetree@...lion.org.uk,
	galak@...eaurora.org
Cc:	f.fainelli@...il.com, netdev@...r.kernel.org,
	devicetree@...r.kernel.org
Subject: [PATCH RFC 1/2] Documentation: add Device tree bindings for QCA7000

This patch adds the Device tree bindings for the Ethernet over SPI
protocol driver of the Qualcomm QCA7000 HomePlug GreenPHY.

Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
---
 .../devicetree/bindings/net/qca-qca7000-spi.txt    |   51 ++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/qca-qca7000-spi.txt

diff --git a/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt b/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt
new file mode 100644
index 0000000..132c10f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt
@@ -0,0 +1,51 @@
+* Qualcomm QCA7000 (Ethernet over SPI protocol)
+
+Note: The QCA7000 is useable as a SPI device. In this case it must be defined
+as a child of a spi master in the device tree.
+
+Required properties:
+- compatible : Should be "qca,qca7000"
+- reg : Should specify the SPI chip select
+- intr-gpios : Should specify the GPIO for SPI interrupt
+- spi-cpha : Must be set
+- spi-cpol: Must be set
+
+Optional properties:
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at.
+  Numbers smaller than 1000000 or greater than 16000000 are invalid. Missing
+  the property will set the SPI frequency to 8000000 Hertz.
+- local-mac-address: 6 bytes, mac address
+- qca,legacy-mode : Should specify the data transfer mode of the QCA7000
+  (0 = burst mode, 1 = legacy mode). Missing the property will use the
+  burst mode.
+- linux,burst-length : Number of data bytes per burst. Numbers smaller than 1
+  or greater than 5000 are invalid. Missing the property will set the
+  burst length to 5000 bytes. This property has only an effect in burst mode.
+- linux,pluggable-connection : Should be set to skip signature check while
+  probing. This property is useful if the SPI master and QCA7000 are not on the
+  same board.
+
+Example:
+
+/* Freescale i.MX28 SPI master*/
+ssp2: ssp@...14000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	qca7000@0 {
+		compatible = "qca,qca7000";
+		reg = <0x0>;
+		spi-cpha;                         /* SPI mode: CPHA=1 */
+		spi-cpol;                         /* SPI mode: CPOL=1 */
+		spi-max-frequency = <8000000>;    /* freq: 8 MHz */
+		intr-gpios = <&gpio3 25 0>;       /* GPIO3_25 */
+		qca,legacy-mode = <0>;            /* Burst mode */
+		local-mac-address = [ A0 B0 C0 D0 E0 F0 ];
+		linux,burst-length = <5000>;
+		linux,pluggable-connection;
+	};
+};
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html