From: Stefan Raspl The existing options for priority queueing within OSA devices were based on the now partially defunct TOS field. This patch adds two new options as follows: - prio_queueing_skb: bases priority queueing on skb-priority - prio_queueing_vlan: uses the priority code point in the 802.1Q header Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Reviewed-by: Ursula Braun --- drivers/s390/net/qeth_core.h | 2 ++ drivers/s390/net/qeth_core_main.c | 15 +++++++++++---- drivers/s390/net/qeth_core_sys.c | 14 ++++++++++++++ 3 files changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 0a4148d..a2088af 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -268,6 +268,8 @@ static inline int qeth_is_ipa_enabled(struct qeth_ipa_info *ipa, #define QETH_NO_PRIO_QUEUEING 0 #define QETH_PRIO_Q_ING_PREC 1 #define QETH_PRIO_Q_ING_TOS 2 +#define QETH_PRIO_Q_ING_SKB 3 +#define QETH_PRIO_Q_ING_VLAN 4 /* Packing */ #define QETH_LOW_WATERMARK_PACK 2 diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index dca5161..34993009 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3677,12 +3677,9 @@ EXPORT_SYMBOL_GPL(qeth_qdio_output_handler); int qeth_get_priority_queue(struct qeth_card *card, struct sk_buff *skb, int ipv, int cast_type) { + __be16 *tci; u8 tos; - if (!ipv && (card->info.type == QETH_CARD_TYPE_OSD || - card->info.type == QETH_CARD_TYPE_OSX)) - return card->qdio.default_out_queue; - if (cast_type && card->info.is_multicast_different) return card->info.is_multicast_different & (card->qdio.no_out_queues - 1); @@ -3710,6 +3707,16 @@ int qeth_get_priority_queue(struct qeth_card *card, struct sk_buff *skb, return 1; if (tos & IPTOS_LOWDELAY) return 0; + break; + case QETH_PRIO_Q_ING_SKB: + if (skb->priority > 5) + return 0; + return ~skb->priority >> 1 & 3; + case QETH_PRIO_Q_ING_VLAN: + tci = &((struct ethhdr *)skb->data)->h_proto; + if (*tci == ETH_P_8021Q) + return ~*(tci + 1) >> (VLAN_PRIO_SHIFT + 1) & 3; + break; default: break; } diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index 8547de8..8a25a2b 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -217,6 +217,10 @@ static ssize_t qeth_dev_prioqing_show(struct device *dev, return sprintf(buf, "%s\n", "by precedence"); case QETH_PRIO_Q_ING_TOS: return sprintf(buf, "%s\n", "by type of service"); + case QETH_PRIO_Q_ING_SKB: + return sprintf(buf, "%s\n", "by skb-priority"); + case QETH_PRIO_Q_ING_VLAN: + return sprintf(buf, "%s\n", "by VLAN headers"); default: return sprintf(buf, "always queue %i\n", card->qdio.default_out_queue); @@ -253,9 +257,19 @@ static ssize_t qeth_dev_prioqing_store(struct device *dev, if (!strcmp(tmp, "prio_queueing_prec")) { card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_PREC; card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; + } else if (!strcmp(tmp, "prio_queueing_skb")) { + card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_SKB; + card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; } else if (!strcmp(tmp, "prio_queueing_tos")) { card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_TOS; card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; + } else if (!strcmp(tmp, "prio_queueing_vlan")) { + if (!card->options.layer2) { + rc = -ENOTSUPP; + goto out; + } + card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_VLAN; + card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; } else if (!strcmp(tmp, "no_prio_queueing:0")) { card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; card->qdio.default_out_queue = 0; -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html