netdev - [RFC net-next 11/11] net: dsa: bcm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1400043637-9799-12-git-send-email-f.fainelli@gmail.com>
Date:	Tue, 13 May 2014 22:00:37 -0700
From:	Florian Fainelli <f.fainelli@...il.com>
To:	netdev@...r.kernel.org
Cc:	davem@...emloft.net, Florian Fainelli <f.fainelli@...il.com>,
	nhorman@...driver.com, andy@...yhouse.net, tgraf@...g.ch,
	dborkman@...hat.com, ogerlitz@...lanox.com, jesse@...ira.com,
	pshelar@...ira.com, azhou@...ira.com, ben@...adent.org.uk,
	stephen@...workplumber.org, jeffrey.t.kirsher@...el.com,
	vyasevic@...hat.com, xiyou.wangcong@...il.com,
	john.r.fastabend@...el.com, edumazet@...gle.com, jhs@...atatu.com,
	sfeldma@...ulusnetworks.com, roopa@...ulusnetworks.com,
	linville@...driver.com, jasowang@...hat.com, ebiederm@...ssion.com,
	nicolas.dichtel@...nd.com, ryazanov.s.a@...il.com,
	buytenh@...tstofly.org, aviadr@...lanox.com, nbd@...nwrt.org,
	alexei.starovoitov@...il.com, Neil.Jerram@...aswitch.com
Subject: [RFC net-next 11/11] net: dsa: bcm_sf2: enable Broadcom tags

Select the Broadcom tag mangler/unmangler and configure the IMP port of
the switch to dispatch the frames to/from the per-port network devices.

Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
 drivers/net/dsa/Kconfig        |  1 +
 drivers/net/dsa/bcm_sf2.c      | 19 +++++++++++++++++--
 drivers/net/dsa/bcm_sf2_regs.h | 40 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 58 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 9b51960a4227..d1d049682a8c 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -39,6 +39,7 @@ config NET_DSA_MV88E6123_61_65
 config NET_DSA_BCM_SF2
 	tristate "Broadcom Starfighter 2 Ethernet switch support"
 	select NET_DSA
+	select NET_DSA_TAG_BRCM
 	select FIXED_PHY
 	select BCM7XXX_PHY
 	select MDIO_UNIMAC
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 1f8ac8d45c90..110ea7993c3c 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -164,15 +164,30 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 		break;
 	}
 
-	/* Disable Broadcom tags for IMP port */
+	/* Enable Broadcom tags for IMP port */
 	reg = core_readl(priv, CORE_BRCM_HDR_CTRL);
-	reg &= ~val;
+	reg |= val;
 	core_writel(priv, reg, CORE_BRCM_HDR_CTRL);
 
+	/* Enable reception Broadcom tag for CPU TX (switch RX) to
+	 * allow us to tag outgoing frames
+	 */
+	reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS);
+	reg &= ~(1 << port);
+	core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS);
+
+	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
+	 * allow delivering frames to the per-port net_devices
+	 */
+	reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
+	reg &= ~(1 << port);
+	core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
+
 	/* Force link status for IMP port */
 	reg = core_readl(priv, CORE_STS_OVERRIDE_IMP);
 	reg |= (MII_SW_OR | LINK_STS);
 	core_writel(priv, reg, CORE_STS_OVERRIDE_IMP);
+
 }
 
 static void bcm_sf2_port_setup(struct dsa_switch *ds, int port)
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index e183cac3d7c8..92a59fb4eec3 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -127,6 +127,19 @@
 #define  GMII_SPEED_UP_2G		(1 << 6)
 #define  MII_SW_OR			(1 << 7)
 
+#define CORE_NEW_CTRL			0x00084
+#define  IP_MC				(1 << 0)
+#define  OUTRANGEERR_DISCARD		(1 << 1)
+#define  INRANGEERR_DISCARD		(1 << 2)
+#define  CABLE_DIAG_LEN			(1 << 3)
+#define  OVERRIDE_AUTO_PD_WAR		(1 << 4)
+#define  EN_AUTO_PD_WAR			(1 << 5)
+#define  UC_FWD_EN			(1 << 6)
+#define  MC_FWD_EN			(1 << 7)
+
+#define CORE_SFT_LRN_CTRL		0x000f8
+#define  SW_LEARN_CNTL(x)		(1 << (x))
+
 #define CORE_STS_OVERRIDE_GMIIP_PORT(x)	(0x160 + (x) * 4)
 #define  LINK_STS			(1 << 0)
 #define  DUPLX_MODE			(1 << 1)
@@ -152,11 +165,38 @@
 #define CORE_PAUSESTS			0x00428
 #define  PAUSESTS_TX_PAUSE_SHIFT	9
 
+#define CORE_GMNCFGCFG			0x0800
+#define  RST_MIB_CNT			(1 << 0)
+#define  RXBPDU_EN			(1 << 1)
+
 #define CORE_BRCM_HDR_CTRL		0x0080c
 #define  BRCM_HDR_EN_P8			(1 << 0)
 #define  BRCM_HDR_EN_P5			(1 << 1)
 #define  BRCM_HDR_EN_P7			(1 << 2)
 
+#define CORE_BRCM_HDR_CTRL2		0x0828
+
+#define CORE_HL_PRTC_CTRL		0x0940
+#define  ARP_EN				(1 << 0)
+#define  RARP_EN			(1 << 1)
+#define  DHCP_EN			(1 << 2)
+#define  ICMPV4_EN			(1 << 3)
+#define  ICMPV6_EN			(1 << 4)
+#define  ICMPV6_FWD_MODE		(1 << 5)
+#define  IGMP_DIP_EN			(1 << 8)
+#define  IGMP_RPTLVE_EN			(1 << 9)
+#define  IGMP_RTPLVE_FWD_MODE		(1 << 10)
+#define  IGMP_QRY_EN			(1 << 11)
+#define  IGMP_QRY_FWD_MODE		(1 << 12)
+#define  IGMP_UKN_EN			(1 << 13)
+#define  IGMP_UKN_FWD_MODE		(1 << 14)
+#define  MLD_RPTDONE_EN			(1 << 15)
+#define  MLD_RPTDONE_FWD_MODE		(1 << 16)
+#define  MLD_QRY_EN			(1 << 17)
+#define  MLD_QRY_FWD_MODE		(1 << 18)
+
+#define CORE_RST_MIB_CNT_EN		0x0950
+
 #define CORE_BRCM_HDR_RX_DIS		0x0980
 #define CORE_BRCM_HDR_TX_DIS		0x0988
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html