lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <1400195227-21265-2-git-send-email-horms@verge.net.au> Date: Fri, 16 May 2014 08:07:07 +0900 From: Simon Horman <horms@...ge.net.au> To: dev@...nvswitch.org, netdev@...r.kernel.org, Jesse Gross <jesse@...ira.com>, Pravin B Shelar <pshelar@...ira.com> Cc: Ben Pfaff <blp@...ira.com>, Ravi K <rkerur@...il.com>, Joe Stringer <joe@...d.net.nz> Subject: [PATCH v2.57] datapath: Add basic MPLS support to kernel Allow datapath to recognize and extract MPLS labels into flow keys and execute actions which push, pop, and set labels on packets. Based heavily on work by Leo Alterman, Ravi K, Isaku Yamahata and Joe Stringer. Cc: Ravi K <rkerur@...il.com> Cc: Leo Alterman <lalterman@...ira.com> Cc: Isaku Yamahata <yamahata@...inux.co.jp> Cc: Joe Stringer <joe@...d.net.nz> Signed-off-by: Simon Horman <horms@...ge.net.au> --- v2.57 * The sample action has been changed such that its nested actions no longer have side affects. Accordingly remove the complex logic to verify multiple possible ethtype changes resulting from MPLS actions inside the nested actions of a sample action. Instead provide much simpler logic that tracks changes to the single possible ethtype a packet may have. By my calculations this reduces the size of the patch by about 25%. v2.56 * Update whitelist of ethtypes where mpls_push may be used to include the MPLS ethtypes. The whitelist is now: - ETH_P_IP (0x0800) - ETH_P_ARP (0x0806) - ETH_P_RARP (0x0835) - ETH_P_IPV6 (0x86DD) - ETH_P_MPLS_UC (0x8847) - ETH_P_MPLS_MC (0x8847) * Rebase for - 6d328fa23ddf5c75 ("ofproto: Honour Table Mod settings for table-miss handling") - 708fb4c50aa5547f ("datapath: Compact sw_flow_key.") - 0962036c0ec3db8a ("recirculation: Adjust ovs_key_attr ABI") v2.55 * Use a whitelist of ethtypes where mpls_push may be used rather than a blacklist of ethtypes where mpls_push may not be used. This is a more restrictive and more conservative approach that guarantees that the tag order is known and defined. The new whitelist is: - ETH_P_IP (0x0800) - ETH_P_ARP (0x0806) - ETH_P_RARP (0x0835) - ETH_P_IPV6 (0x86DD) The old blacklist was: - ETH_P_8021Q (0x8100) - ETH_P_8021AD (0x88A8) - ETH_P_QINQ1 (0x0x9100) - ETH_P_QINQ2 (0x0x9200) - ETH_P_QINQ3 (0x0x9300) * Rebase for 29c71cfa0c137abd ("datapath: Add support for Linux 3.12") 982a47eceac1be71 ("datapath: Use ether_addr_copy") v2.54 * Do not allow push MPLS in the presence of VLANs * Remove support for push MPLS in the presence of VLANs from actions.c v2.53 * Push MPLS labels after VLAN tags - This is consistent with OF1.2 and plans for OF1.3.4, and OF1.5+. It is inconsistent with OF1.4, which appears to be an aberration v2.52 * Do not guard __skb_network_protocol with KERNEL_VERSION(3.11.0) It was not guarded before this patch and should not be guarded afterwards as it is currently needed regardless of the kernel version v2.50 - v2.51 * No change v2.49 * Remove MPLS items from OPENFLOW-1.1+. They should now be complete. v2.47 * Rebase for HAVE_RHEL_OVS_HOOK and OVS_KEY_ATTR_TCP_FLAGS v2.43 - v2.46 * No change v2.42 * Rebase for: + 0585f7a ("datapath: Simplify mega-flow APIs.") + a097c0b ("datapath: Restructure datapath.c and flow.c") * As suggested by Jesse Gross + Take into account that push_mpls() will have freed the skb on error + Remove dubious !eth_p_mpls(skb->protocol) condition from push_mpls The !eth_p_mpls(skb->protocol) condition on setting inner_protocol has no effect. Its motivation was to ensure that inner_protocol was only set the first time that mpls_push occured. However this is already ensured by the !ovs_skb_get_inner_protocol(skb) condition. + Return -EINVAL instead of -ENOMEM from pop_mpls() if the skb is too short + Do not add @inner_protocol to kernel doc for struct ovs_skb_cb. The patch no longer adds an inner_protocol member to struct ovs_skb_cb + Do not add and set otherwise unsued inner_protocol variable in rpl_dev_queue_xmit() * As suggested by Pravin Shelar + Implement compatibility code in existing rpl_skb_gso_segment rather than introducing to use rpl___skb_gso_segment v2.41 * No change v2.40 * Rebase for: + New dev_queue_xmit compat code + Updated put_vlan() * As suggested by Jesse Gross + Remove bogus mac_len update from push_mpls() + Slightly simplify push_mpls() by using eth_hdr() + Remove dubious condition !eth_p_mpls(inner_protocol) on an skb being considered to be MPLS in netdev_send() + Only use compatibility code for MPLS GSO segmentation on kernels older than 3.11 + Revamp setting of inner_protocol 1. Do not unconditionally set inner_protocol to the value of skb->protocol in ovs_execute_actions(). 2. Initialise inner_protocol it to zero only if compatibility code is in use. In the case where compatibility code is not in use it will either be zero due since the allocation of the skb or some other value set by some other user. 3. Conditionally set the inner_protocol in push_mpls() to the value of skb->protocol when entering push_mpls(). The condition is that inner_protocol is zero and the value of skb->protocol is not an MPLS ethernet type. - This new scheme: + Pushes logic to set inner_protocol closer to the case where it is needed. + Avoids over-writing values set by other users. * As suggested by Pravin Shelar + Only set and restore skb->protocol in rpl___skb_gso_segment() in the case of MPLS + Add inner_protocol field to struct ovs_gso_cb instead of ovs_skb_cb. This moves compatibility code closer to where it is used and creates fewer differences with mainline. * Update comment on mac_len updates in datapath/actions.c * Remove HAVE_INNER_PROCOTOL and instead just check against kernel version 3.11 directly. HAVE_INNER_PROCOTOL is a hang-over from work done prior to the merge of inner_protocol into the kernel. * Remove dubious condition !eth_p_mpls(inner_protocol) on using inner_protocol as the type in rpl_skb_network_protocol() * Do not update type of features in rpl_dev_queue_xmit. Though arguably correct this is not an inherent part of the changes made by this patch. * Use skb_cow_head() in push_mpls() + Call skb_cow_head(skb, MPLS_HLEN) instead of make_writable(skb, skb->mac_len) to ensure that there is enough head room to push an MPLS LSE regardless of whether the skb is cloned or not. + This is consistent with the behaviour of rpl__vlan_put_tag(). + This is a fix for crashes reported when performing mpls_push with headroom less than 4. This problem was introduced in v3.36. * Skip popping in mpls_pop if the skb is too short to contain an MPLS LSE v2.39 * Rebase for removal of vlan, checksum and skb->mark compat code v2.38 * Rebase for SCTP support * Refactor validate_tp_port() to iterate over eth_types rather than open-coding the loop. With the addition of SCTP this logic is now used three times. v2.37 * Rebase v2.36 * Do not add set_ethertype() to datapath/actions.c. As this patch has evolved this function had devolved into to sets of functionality wrapped into a single function with only one line of common code. Refactor things to simply open-code setting the ether type in the two locations where set_ethertype() was previously used. The aim here is to improve readability. * Update setting skb->protocol after mpls push and pop. - In the case of push_mpls it should be set unconditionally as in v2.35 the behaviour of this function to always push an MPLS LSE before any VLAN tags. - In the case of mpls_pop eth_p_mpls(skb->protocol) is a better test than skb->protocol != htons(ETH_P_8021Q) as it will give the correct behaviour in the presence of other VLAN ethernet types, for example 0x88a8 which is used by 802.1ad. Moreover, it seems correct to update the ethernet type if it was previously set according to the top-most MPLS LSE. * Deaccelerate VLANs when pushing MPLS tags the - Since v2.35 MPLS push will insert an MPLS LSE before any VLAN tags. This means that if an accelerated tag is present it should be deaccelerated to ensure it ends up in the correct position. * Update skb->mac_len in push_mpls() so that it will be correct when used by a subsequent call to pop_mpls(). As things stand I do not believe this is strictly necessary as ovs-vswitchd will not send a pop MPLS action after a push MPLS action. However, I have added this in order to code more defensively as I believe that if such a sequence did occur it would be rather unobvious why it didn't work. * Do not add skb_cow_head() call in push_mpls(). It is unnecessary as there is a make_writable() call. This change was also made in v2.30 but some how the code regressed between then and v2.35. v2.35 * Rebase * Move MPLS constants to mpls.h * Push MPLS tags after ethernet, before VLAN tags - This is consistent with the OpenFlow 1.3 specification - Compatibility with OpenFlow 1.2 and earlier versions may be provided by ovs-vswitchd. * Correct GSO behaviour in the presence of MPLS but absence of VLANs v2.34 * Rebase for megaflow changes v2.33 * Ensure that inner_protocol is always set to to the current skb->protocol value in ovs_execute_actions(). This ensures it is set to the correct value in the absence of a push_mpls action. Also remove setting of inner_protocol in push_mpls() as it duplicates the code now in ovs_execute_actions(). * Call __skb_gso_segment() instead of skb_gso_segment() from rpl___skb_gso_segment() in the case that HAVE___SKB_GSO_SEGMENT is set. This was a typo. v2.32 * As suggested by Jesse Gross - Use int instead of size_t in validate_and_copy_actions__(). - Fix crazy edit mess in pop_mpls() action comment - Move eth_p_mpls() into mpls.h - Refactor skb_gso_segment MPLS handling into rpl_skb_gso_segment Address Jesse's comments regarding this code: "Can we push this completely into the skb_gso_segment() compatibility code? It's both nicer and may make the interactions with the vlan code less confusing." - Move GSO compatibility code into linux/compat/gso.* - Set skb->protocol on mpls_push and mpls_pop in the presence of an offloaded VLAN. v2.31 * As suggested by Jesse Gross - There is no need to make mac_header_end inline as it is not in a header file - Remove dubious if (*skb_ethertype == ethertype) optimisation from set_ethertype - Only set skb->protocol in push_mpls() or pop_mpls() for non-VLAN packets - Use MAX_ETH_TYPES instead of SAMPLE_ACTION_DEPTH for array size of types in struct eth_types. This corrects a typo/thinko. - Correct eth type tracking logic such that start isn't advanced when entering a sample action, ensuring that all possibly types are checked when verifying nested actions. * Define HAVE_INNER_PROTOCOL based on kernel version. inner_protocol has been merged into net-next and should appear in v3.11 so there is no longer a need for a acinclude.m4 test to check for it. * Add MPLS GSO compatibility code. This is for use on kernels that do not have MPLS GSO support. Thanks to Joe Stringer for his work on this. v2.30 * As suggested by Jesse Gross - Use skb_cow_head in push_mpls to ensure there is sufficient headroom for skb_push - Call make_writable with skb->mac_len instead of skb->mac_len + MPLS_HLEN in push_mpls as only the first skb->mac_len bytes of existing packet data are modified. - Rename skb_mac_header_end as mac_header_end, this seems to be a more appropriate name for a local function. - Remove OVS_CSUM_COMPLETE code from set_ethertype(). Inside OVS the ethernet header is not covered by OVS_CSUM_COMPLETE. - Use __skb_pull() instead of skb_pull() in pop_mpls() - Decrement and decrement skb->mac_len when poping and pushing VLAN tags. Previously mac_len was reset, but this would result in forgetting the MPLS label stack. - Remove spurious comment from before do_execute_actions(). - Move OVS_KEY_ATTR_MPLS attribute to its final, upstreamable, location. - Correct ethertype check for OVS_ACTION_ATTR_POP_MPLS case in validate_and_copy_actions() to check for MPLS ethertypes rather than ETH_P_IP. - Rewrite tracking of eth types used to verify actions in the presence of sample actions. There is a large comment above struct eth_types describing the new implementation. v2.29 * Break include/ and lib/ portions of the patch out into a separate patch "datapath: Add basic MPLS support to kernel" * Update for new MPLS GSO scheme - skb->protocol is set to the new ethertype of the packet on MPLS push and pop - When pushing the first MPLS LSE onto a previously non-MPLS packet set skb->inner_protocol to the original ethertype. - skb->inner_protocol may be used by the network stack for GSO of the inner-packet. * Drop const from ethertype parameter of set_ethertype. This appears to be a legacy of this parameter being a pointer. * Pass the ethertype patrameter of pop_mpls as a value rather than a pointer. v2.28 * Kernel Datapath changes as suggested by Jarno Rajahalme + Correct the logic introduced in v2.27 to set the network_header to after the MPLS label stack in the case of an MPLS packet. - Increment stack_len offset so that label stacks of depth greater than two do not cause an infinite loop. - Correct offset passed to check_header to include skb->mac len v2.27 * Kernel Datapath changes as suggested by Jarno Rajahalme and Jesse Gross: + Previously the mac_len and network_header of an skb corresponded to the end of the L2 header. To support GSO, just before transmission, do_output, with the results as follows: Input: non-MPLS skb: Output: network header and mac_len correspond to the beginning of the L3 headers Input: MPLS: Output: network header and mac_len correspond to the end of the L2 headers. This is somewhat confusing. + The new scheme is as follows: - The mac_len always corresponds to the end of the L2 header. - The network header always corresponds to the beginning of the L3 header. + Note that in the case of MPLS output the end of the L2 headers and the beginning of the L3 headers will differ. * Remove unused declaration of skb_cb_mpls_stack() v2.26 * Rebase on master * Kernel Datapath changes as suggested by Jarno Rajahalme - Use skb_network_header() instead of skb_mac_header() to locate the ethertype to set in set_ethertype() as the latter will be wrong in the presence of VLAN tags. This resolves a regression introduced in v2.24. - Enhance comment in do_output() - do_execute_actions(): Do not alter mpls_stack_depth if a MPLS push or pop action fail. This is achieved by altering mpls_stack_depth at the end of push_mpls() and pop_mpls(). v2.25 * Rebase on master * Pass big-endian value as the last argument of eth_types_set() in validate_and_copy_actions__() * Use revised GSO support as provided by the patch series "[PATCH 0/2] Small Modifications to GSO to allow segmentation of MPLS" - Set skb->mac_len to the length of the l2 header + MPLS stack length - Update skb->network_header accordingly - Set skb->encapsulated_features v2.24 * Use skb_mac_header() in set_ethertype() * Set skb->encapsulation in set_ethertype() to support MPLS GSO. Also add a note about the other requirements for MPLS GSO. MPLS GSO support will be posted as a patch net-next (Linux mainline) "MPLS: Add limited GSO support" * Do not add ETH_TYPE_MIN, it is no longer used v2.23 * As suggested by Jesse Gross: - Verify the current ethernet type when validating sample actions both for the taken and not-taken path if the sample action. - Document that the OVS_KEY_ATTR_MPLS attribute accepts a list of struct ovs_key_mpls but that an implementation may restrict the length it accepts. - Restrict the array length of the OVS_KEY_ATTR_MPLS to one. + Don't add ovs_flow_verify_key_len as it was added to handle attributes whose values are arrays but there are no attributes with values that are arrays (of length greater than one). v2.22 * As suggested by Jesse Gross: - Fix sparse warning in validate_and_copy_actions() I have no idea why sparse doesn't show this up this on my system. - Remove call to skb_cow_head() from push_mpls() as it is already covered by a call to make_writable() - Check (key_type > OVS_KEY_ATTR_MAX) in ovs_flow_verify_key_len() - Disallow set actions on l2.5+ data and MPLS push and pop actions after an MPLS pop action as there is no verification that the packet is actually of the new ethernet type. This may later be supported using recirculation or by other means. - Do not add spurious debuging message to ovs_flow_cmd_new_or_set() v2.21 * As suggested by Jesse Gross: - Verify that l3 and l4 actions always always occur prior to a push_mpls action and use the network header pointer of an skb to track the top of the MPLS stack. This avoids adding an l2_size element to the skb callback. v2.20 * As suggested by Jesse Gross: - Do not add ovs_dp_ioctl_hook + This appears to be garbage from a rebase - Do not add skb_cb_set_l2_size. Instead set OVS_CB(skb)->l2_size in ovs_flow_extract(). - Do not free skb on error in push_mpls(), it is freed in the caller - Call skb_reset_mac_len() in pop_mpls() and push_mpls() - Update checksums in pop_mpls(), push_mpls() and set_mpls(). - Rename skb_cb_mpls_bos() as skb_cb_mpls_stack(). It returns the top not the bottom of the stack. - Track the current eth_type in validate_and_copy_actions which is initially the eth_type of the flow and may be modified by push_mpls and pop_mpls actions. Use this to correctly validate mpls_set actions. This is to allow mpls_set actions to be applied to a non-MPLS frame after an mpls_push action (although ovs-vswitchd doesn't currently do that). Also: + Remove the check of the eth_type in set_mpls() as the new validation scheme should ensure it cannot be incorrect. + Use the current eth_type to validate mpls_pop actions and remove the eth_type check from pop_mpls(). - Move OVS_KEY_ATTR_MPLS to non-upstream group in ovs_key_lens - Remove unnecessary memset of mpls_key in ovs_flow_to_nlattrs() - Make a union of the mpls and ip elements of struct sw_flow_key. Currently the code stops parsing after an MPLS header so it is not possible for the ip and mpls elements to be used simultaneously and some space can be saved by using a union. - Allow an array of MPLS key attributes + Currently all but the first element is ignored + User-space needs to be updated to accept more than one element, currently it will treat their presence as an error - Do not update network header in ovs_flow_extract() for after parsing the MPLS stack as it is never used because no l3+ processing occurs on MPLS frames. - Allow multiple MPLS entries in a match by allowing the OVS_KEY_ATTR_MPLS to be an array of struct ovs_key_mpls with at least one entry. Currently only one entry is used which is byte-for-byte compatible with the previous scheme of having OVS_KEY_ATTR_MPLS as a struct ovs_key_mpls. * Make skb writable in pop_mpls(), push_mpls() and set_mpls(). v2.18 - v2.19 * No change v2.17 * As suggested by Ben Pfaff - Use consistent terminology for MPLS. + Consistently refer to the MPLS component of a packet as the MPLS label stack and entries in the stack as MPLS label stack entries (LSE). An MPLS label is a component of an MPLS label stack entry. The other components are the traffic class (TC), time to live (TTL) and bottom of stack (BoS) bit. - Rename compose_.*mpls_ functions as execute_.*mpls_ v2.16 * No change v2.15 * As suggested by Ben Pfaff - Use OVS_ACTION_SET to set OVS_KEY_ATTR_MPLS instead of OVS_ACTION_ATTR_SET_MPLS v2.14 * Remove include/linux/openvswitch.h portion which added add new key and action attributes. This now present in "User-Space MPLS actions and matches" which is now a dependency of this patch v2.13 * As suggested by Jarno Rajahalme - Rename mpls_bos element of ovs_skb_cb as l2_size as it is set and used regardless of if an MPLS stack is present or not. Update the name of helper functions and documentation accordingly. - Ensure that skb_cb_mpls_bos() never returns NULL * Correct endieness in eth_p_mpls() v2.12 * Update skb and network header on MPLS extraction in ovs_flow_extract() * Use NULL in skb_cb_mpls_bos() * Add eth_p_mpls helper v2.10 - v2.11 * No change v2.9 * datapath: Always update the mpls bos if vlan_pop is successful Regardless of the details of how a successful vlan_pop is achieved, the mpls bos needs to be updated. Without this fix it has been observed that the following results in malformed packets v2.8 * No change v2.7 * Rebase v2.6 * As suggested by Yamahata-san - Do not guard against label == 0 for OVS_ACTION_ATTR_SET_MPLS in validate_actions(). A label of 0 is valid - Remove comment stupulating that if the top_label element of struct sw_flow_key is 0 then there is no MPLS label. An MPLS label of 0 is valid and the correct check if ethertype is ntohs(ETH_TYPE_MPLS) or ntohs(ETH_TYPE_MPLS_MCAST) v2.4 - v2.5 * No change v2.3 * s/mpls_stack/mpls_bos/ This is in keeping with the naming used in the OpenFlow 1.3 specification v2.2 * Call skb_reset_mac_header() in skb_cb_set_mpls_stack() eth_hdr(skb) is non-NULL when called in skb_cb_set_mpls_stack(). * Add a call to skb_cb_set_mpls_stack() in ovs_packet_cmd_execute(). I apologise that I have mislaid my notes on this but it avoids a kernel panic. I can investigate again if necessary. * Use struct ovs_action_push_mpls instead of __be16 to decode OVS_ACTION_ATTR_PUSH_MPLS in validate_actions(). This is consistent with the data format for the attribute. * Indentation fix in skb_cb_mpls_stack(). [cosmetic] v2.1 * Manual rebase Conflicts: datapath/linux/compat/include/linux/netdevice.h datapath/linux/compat/netdevice.c wip: remove eth_types logic wip: prohibit push/pop MPLS inside sample Allow MPLS inside sample actions without side-effects Signed-off-by: Simon Horman <horms@...ge.net.au> --- OPENFLOW-1.1+ | 4 - datapath/Modules.mk | 1 + datapath/actions.c | 118 ++++++++++++++++++++++- datapath/datapath.c | 6 +- datapath/flow.c | 29 ++++++ datapath/flow.h | 17 ++-- datapath/flow_netlink.c | 119 ++++++++++++++++++++---- datapath/flow_netlink.h | 2 +- datapath/linux/compat/gso.c | 70 +++++++++++--- datapath/linux/compat/gso.h | 41 +++++++- datapath/linux/compat/include/linux/netdevice.h | 6 +- datapath/linux/compat/netdevice.c | 10 +- datapath/mpls.h | 15 +++ include/linux/openvswitch.h | 9 +- 14 files changed, 394 insertions(+), 53 deletions(-) create mode 100644 datapath/mpls.h diff --git a/OPENFLOW-1.1+ b/OPENFLOW-1.1+ index 1789f17..4d7f836 100644 --- a/OPENFLOW-1.1+ +++ b/OPENFLOW-1.1+ @@ -54,10 +54,6 @@ OpenFlow 1.1 The list of remaining work items for OpenFlow 1.1 is below. It is probably incomplete. - * MPLS. Simon Horman maintains a patch series that adds this - feature. This is partially merged. - [optional for OF1.1+] - * Match and set double-tagged VLANs (QinQ). This requires kernel work for reasonable performance. [optional for OF1.1+] diff --git a/datapath/Modules.mk b/datapath/Modules.mk index b652411..6aa80e5 100644 --- a/datapath/Modules.mk +++ b/datapath/Modules.mk @@ -26,6 +26,7 @@ openvswitch_headers = \ flow.h \ flow_netlink.h \ flow_table.h \ + mpls.h \ vlan.h \ vport.h \ vport-internal_dev.h \ diff --git a/datapath/actions.c b/datapath/actions.c index 603c7cb..7c3ae0c 100644 --- a/datapath/actions.c +++ b/datapath/actions.c @@ -35,6 +35,8 @@ #include <net/sctp/checksum.h> #include "datapath.h" +#include "gso.h" +#include "mpls.h" #include "vlan.h" #include "vport.h" @@ -49,6 +51,101 @@ static int make_writable(struct sk_buff *skb, int write_len) return pskb_expand_head(skb, 0, 0, GFP_ATOMIC); } +/* The end of the mac header. + * + * For non-MPLS skbs this will correspond to the network header. + * For MPLS skbs it will be before the network_header as the MPLS + * label stack lies between the end of the mac header and the network + * header. That is, for MPLS skbs the end of the mac header + * is the top of the MPLS label stack. + */ +static unsigned char *mac_header_end(const struct sk_buff *skb) +{ + return skb_mac_header(skb) + skb->mac_len; +} + +static int push_mpls(struct sk_buff *skb, + const struct ovs_action_push_mpls *mpls) +{ + __be32 *new_mpls_lse; + struct ethhdr *hdr; + + if (skb_cow_head(skb, MPLS_HLEN) < 0) { + kfree_skb(skb); + return -ENOMEM; + } + + skb_push(skb, MPLS_HLEN); + memmove(skb_mac_header(skb) - MPLS_HLEN, skb_mac_header(skb), + skb->mac_len); + skb_reset_mac_header(skb); + + new_mpls_lse = (__be32 *)mac_header_end(skb); + *new_mpls_lse = mpls->mpls_lse; + + if (skb->ip_summed == CHECKSUM_COMPLETE) + skb->csum = csum_add(skb->csum, csum_partial(new_mpls_lse, + MPLS_HLEN, 0)); + + hdr = eth_hdr(skb); + hdr->h_proto = mpls->mpls_ethertype; + skb->protocol = mpls->mpls_ethertype; + return 0; +} + +static int pop_mpls(struct sk_buff *skb, const __be16 ethertype) +{ + struct ethhdr *hdr; + int err; + + if (unlikely(skb->len < skb->mac_len + MPLS_HLEN)) + return -EINVAL; + + err = make_writable(skb, skb->mac_len + MPLS_HLEN); + if (unlikely(err)) + return err; + + if (skb->ip_summed == CHECKSUM_COMPLETE) + skb->csum = csum_sub(skb->csum, + csum_partial(mac_header_end(skb), + MPLS_HLEN, 0)); + + memmove(skb_mac_header(skb) + MPLS_HLEN, skb_mac_header(skb), + skb->mac_len); + + __skb_pull(skb, MPLS_HLEN); + skb_reset_mac_header(skb); + + /* mac_header_end() is used to locate the ethertype + * field correctly in the presence of VLAN tags. + */ + hdr = (struct ethhdr *)(mac_header_end(skb) - ETH_HLEN); + hdr->h_proto = ethertype; + if (eth_p_mpls(skb->protocol)) + skb->protocol = ethertype; + return 0; +} + +static int set_mpls(struct sk_buff *skb, const __be32 *mpls_lse) +{ + __be32 *stack = (__be32 *)mac_header_end(skb); + int err; + + err = make_writable(skb, skb->mac_len + MPLS_HLEN); + if (unlikely(err)) + return err; + + if (skb->ip_summed == CHECKSUM_COMPLETE) { + __be32 diff[] = { ~(*stack), *mpls_lse }; + skb->csum = ~csum_partial((char *)diff, sizeof(diff), + ~skb->csum); + } + + *stack = *mpls_lse; + + return 0; +} + /* remove VLAN header from packet and update csum accordingly. */ static int __pop_vlan_tci(struct sk_buff *skb, __be16 *current_tci) { @@ -71,7 +168,8 @@ static int __pop_vlan_tci(struct sk_buff *skb, __be16 *current_tci) vlan_set_encap_proto(skb, vhdr); skb->mac_header += VLAN_HLEN; - skb_reset_mac_len(skb); + /* Update mac_len for subsequent MPLS actions */ + skb->mac_len -= VLAN_HLEN; return 0; } @@ -116,6 +214,9 @@ static int push_vlan(struct sk_buff *skb, const struct ovs_action_push_vlan *vla if (!__vlan_put_tag(skb, skb->vlan_proto, current_tag)) return -ENOMEM; + /* Update mac_len for subsequent MPLS actions */ + skb->mac_len += VLAN_HLEN; + if (skb->ip_summed == CHECKSUM_COMPLETE) skb->csum = csum_add(skb->csum, csum_partial(skb->data + (2 * ETH_ALEN), VLAN_HLEN, 0)); @@ -545,6 +646,10 @@ static int execute_set_action(struct sk_buff *skb, case OVS_KEY_ATTR_SCTP: err = set_sctp(skb, nla_data(nested_attr)); break; + + case OVS_KEY_ATTR_MPLS: + err = set_mpls(skb, nla_data(nested_attr)); + break; } return err; @@ -604,6 +709,15 @@ static int do_execute_actions(struct datapath *dp, struct sk_buff *skb, case OVS_ACTION_ATTR_HASH: execute_hash(skb, a); + + case OVS_ACTION_ATTR_PUSH_MPLS: + err = push_mpls(skb, nla_data(a)); + if (unlikely(err)) /* skb already freed. */ + return err; + break; + + case OVS_ACTION_ATTR_POP_MPLS: + err = pop_mpls(skb, nla_get_be16(a)); break; case OVS_ACTION_ATTR_PUSH_VLAN: @@ -701,6 +815,8 @@ int ovs_execute_actions(struct datapath *dp, struct sk_buff *skb, bool recirc) goto out_loop; } + ovs_skb_init_inner_protocol(skb); + OVS_CB(skb)->tun_key = NULL; error = do_execute_actions(dp, skb, acts->actions, acts->actions_len); diff --git a/datapath/datapath.c b/datapath/datapath.c index 81ecc0f..cd52d92 100644 --- a/datapath/datapath.c +++ b/datapath/datapath.c @@ -576,7 +576,7 @@ static int ovs_packet_cmd_execute(struct sk_buff *skb, struct genl_info *info) goto err_flow_free; err = ovs_nla_copy_actions(a[OVS_PACKET_ATTR_ACTIONS], - &flow->key, 0, &acts); + &flow->key, &acts); rcu_assign_pointer(flow->sf_acts, acts); if (err) goto err_flow_free; @@ -861,7 +861,7 @@ static int ovs_flow_cmd_new(struct sk_buff *skb, struct genl_info *info) goto err_kfree_flow; error = ovs_nla_copy_actions(a[OVS_FLOW_ATTR_ACTIONS], &new_flow->key, - 0, &acts); + &acts); if (error) { OVS_NLERR("Flow actions may not be safe on all matching packets.\n"); goto err_kfree_acts; @@ -985,7 +985,7 @@ static int ovs_flow_cmd_set(struct sk_buff *skb, struct genl_info *info) ovs_flow_mask_key(&masked_key, &key, &mask); error = ovs_nla_copy_actions(a[OVS_FLOW_ATTR_ACTIONS], - &masked_key, 0, &acts); + &masked_key, &acts); if (error) { OVS_NLERR("Flow actions may not be safe on all matching packets.\n"); goto err_kfree_acts; diff --git a/datapath/flow.c b/datapath/flow.c index c52081b..cbba1cf 100644 --- a/datapath/flow.c +++ b/datapath/flow.c @@ -45,6 +45,7 @@ #include <net/ipv6.h> #include <net/ndisc.h> +#include "mpls.h" #include "vlan.h" u64 ovs_flow_used_time(unsigned long flow_jiffies) @@ -480,6 +481,7 @@ int ovs_flow_extract(struct sk_buff *skb, u16 in_port, struct sw_flow_key *key) return -ENOMEM; skb_reset_network_header(skb); + skb_reset_mac_len(skb); __skb_push(skb, skb->data - skb_mac_header(skb)); /* Network layer. */ @@ -563,6 +565,33 @@ int ovs_flow_extract(struct sk_buff *skb, u16 in_port, struct sw_flow_key *key) ether_addr_copy(key->ipv4.arp.sha, arp->ar_sha); ether_addr_copy(key->ipv4.arp.tha, arp->ar_tha); } + } else if (eth_p_mpls(key->eth.type)) { + size_t stack_len = MPLS_HLEN; + + /* In the presence of an MPLS label stack the end of the L2 + * header and the beginning of the L3 header differ. + * + * Advance network_header to the beginning of the L3 + * header. mac_len corresponds to the end of the L2 header. + */ + while (1) { + __be32 lse; + + error = check_header(skb, skb->mac_len + stack_len); + if (unlikely(error)) + return 0; + + memcpy(&lse, skb_network_header(skb), MPLS_HLEN); + + if (stack_len == MPLS_HLEN) + memcpy(&key->mpls.top_lse, &lse, MPLS_HLEN); + + skb_set_network_header(skb, skb->mac_len + stack_len); + if (lse & htonl(MPLS_BOS_MASK)) + break; + + stack_len += MPLS_HLEN; + } } else if (key->eth.type == htons(ETH_P_IPV6)) { int nh_len; /* IPv6 Header + Extensions */ diff --git a/datapath/flow.h b/datapath/flow.h index 2018691..ca29d56 100644 --- a/datapath/flow.h +++ b/datapath/flow.h @@ -82,12 +82,17 @@ struct sw_flow_key { __be16 tci; /* 0 if no VLAN, VLAN_TAG_PRESENT set otherwise. */ __be16 type; /* Ethernet frame type. */ } eth; - struct { - u8 proto; /* IP protocol or lower 8 bits of ARP opcode. */ - u8 tos; /* IP ToS. */ - u8 ttl; /* IP TTL/hop limit. */ - u8 frag; /* One of OVS_FRAG_TYPE_*. */ - } ip; + union { + struct { + __be32 top_lse; /* top label stack entry */ + } mpls; + struct { + u8 proto; /* IP protocol or lower 8 bits of ARP opcode. */ + u8 tos; /* IP ToS. */ + u8 ttl; /* IP TTL/hop limit. */ + u8 frag; /* One of OVS_FRAG_TYPE_*. */ + } ip; + }; struct { __be16 src; /* TCP/UDP/SCTP source port. */ __be16 dst; /* TCP/UDP/SCTP destination port. */ diff --git a/datapath/flow_netlink.c b/datapath/flow_netlink.c index 803a94c..4166c98 100644 --- a/datapath/flow_netlink.c +++ b/datapath/flow_netlink.c @@ -20,6 +20,7 @@ #include "flow.h" #include "datapath.h" +#include "mpls.h" #include <linux/uaccess.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -123,7 +124,8 @@ static bool match_validate(const struct sw_flow_match *match, | (1ULL << OVS_KEY_ATTR_ICMP) | (1ULL << OVS_KEY_ATTR_ICMPV6) | (1ULL << OVS_KEY_ATTR_ARP) - | (1ULL << OVS_KEY_ATTR_ND)); + | (1ULL << OVS_KEY_ATTR_ND) + | (1ULL << OVS_KEY_ATTR_MPLS)); /* Always allowed mask fields. */ mask_allowed |= ((1ULL << OVS_KEY_ATTR_TUNNEL) @@ -138,6 +140,13 @@ static bool match_validate(const struct sw_flow_match *match, mask_allowed |= 1ULL << OVS_KEY_ATTR_ARP; } + + if (eth_p_mpls(match->key->eth.type)) { + key_expected |= 1ULL << OVS_KEY_ATTR_MPLS; + if (match->mask && (match->mask->key.eth.type == htons(0xffff))) + mask_allowed |= 1ULL << OVS_KEY_ATTR_MPLS; + } + if (match->key->eth.type == htons(ETH_P_IP)) { key_expected |= 1ULL << OVS_KEY_ATTR_IPV4; if (match->mask && (match->mask->key.eth.type == htons(0xffff))) @@ -255,6 +264,7 @@ static const int ovs_key_lens[OVS_KEY_ATTR_MAX + 1] = { [OVS_KEY_ATTR_DP_HASH] = sizeof(u32), [OVS_KEY_ATTR_RECIRC_ID] = sizeof(u32), [OVS_KEY_ATTR_TUNNEL] = -1, + [OVS_KEY_ATTR_MPLS] = sizeof(struct ovs_key_mpls), }; static bool is_all_zero(const u8 *fp, size_t size) @@ -643,6 +653,16 @@ static int ovs_key_from_nlattrs(struct sw_flow_match *match, u64 attrs, attrs &= ~(1ULL << OVS_KEY_ATTR_ARP); } + if (attrs & (1ULL << OVS_KEY_ATTR_MPLS)) { + const struct ovs_key_mpls *mpls_key; + + mpls_key = nla_data(a[OVS_KEY_ATTR_MPLS]); + SW_FLOW_KEY_PUT(match, mpls.top_lse, + mpls_key->mpls_lse, is_mask); + + attrs &= ~(1ULL << OVS_KEY_ATTR_MPLS); + } + if (attrs & (1ULL << OVS_KEY_ATTR_TCP)) { const struct ovs_key_tcp *tcp_key; @@ -1009,6 +1029,14 @@ int ovs_nla_put_flow(const struct sw_flow_key *swkey, arp_key->arp_op = htons(output->ip.proto); ether_addr_copy(arp_key->arp_sha, output->ipv4.arp.sha); ether_addr_copy(arp_key->arp_tha, output->ipv4.arp.tha); + } else if (eth_p_mpls(swkey->eth.type)) { + struct ovs_key_mpls *mpls_key; + + nla = nla_reserve(skb, OVS_KEY_ATTR_MPLS, sizeof(*mpls_key)); + if (!nla) + goto nla_put_failure; + mpls_key = nla_data(nla); + mpls_key->mpls_lse = output->mpls.top_lse; } if ((swkey->eth.type == htons(ETH_P_IP) || @@ -1200,9 +1228,15 @@ static inline void add_nested_action_end(struct sw_flow_actions *sfa, a->nla_len = sfa->actions_len - st_offset; } +static int ovs_nla_copy_actions__(const struct nlattr *attr, + const struct sw_flow_key *key, + int depth, struct sw_flow_actions **sfa, + __be16 eth_type); + static int validate_and_copy_sample(const struct nlattr *attr, const struct sw_flow_key *key, int depth, - struct sw_flow_actions **sfa) + struct sw_flow_actions **sfa, + __be16 eth_type) { const struct nlattr *attrs[OVS_SAMPLE_ATTR_MAX + 1]; const struct nlattr *probability, *actions; @@ -1239,7 +1273,7 @@ static int validate_and_copy_sample(const struct nlattr *attr, if (st_acts < 0) return st_acts; - err = ovs_nla_copy_actions(actions, key, depth + 1, sfa); + err = ovs_nla_copy_actions__(actions, key, depth + 1, sfa, eth_type); if (err) return err; @@ -1249,10 +1283,10 @@ static int validate_and_copy_sample(const struct nlattr *attr, return 0; } -static int validate_tp_port(const struct sw_flow_key *flow_key) +static int validate_tp_port(const struct sw_flow_key *flow_key, + __be16 eth_type) { - if ((flow_key->eth.type == htons(ETH_P_IP) || - flow_key->eth.type == htons(ETH_P_IPV6)) && + if ((eth_type == htons(ETH_P_IP) || eth_type == htons(ETH_P_IPV6)) && (flow_key->tp.src || flow_key->tp.dst)) return 0; @@ -1301,7 +1335,7 @@ static int validate_and_copy_set_tun(const struct nlattr *attr, static int validate_set(const struct nlattr *a, const struct sw_flow_key *flow_key, struct sw_flow_actions **sfa, - bool *set_tun) + bool *set_tun, __be16 eth_type) { const struct nlattr *ovs_key = nla_data(a); int key_type = nla_type(ovs_key); @@ -1333,7 +1367,7 @@ static int validate_set(const struct nlattr *a, break; case OVS_KEY_ATTR_IPV4: - if (flow_key->eth.type != htons(ETH_P_IP)) + if (eth_type != htons(ETH_P_IP)) return -EINVAL; if (!flow_key->ip.proto) @@ -1349,7 +1383,7 @@ static int validate_set(const struct nlattr *a, break; case OVS_KEY_ATTR_IPV6: - if (flow_key->eth.type != htons(ETH_P_IPV6)) + if (eth_type != htons(ETH_P_IPV6)) return -EINVAL; if (!flow_key->ip.proto) @@ -1371,19 +1405,24 @@ static int validate_set(const struct nlattr *a, if (flow_key->ip.proto != IPPROTO_TCP) return -EINVAL; - return validate_tp_port(flow_key); + return validate_tp_port(flow_key, eth_type); case OVS_KEY_ATTR_UDP: if (flow_key->ip.proto != IPPROTO_UDP) return -EINVAL; - return validate_tp_port(flow_key); + return validate_tp_port(flow_key, eth_type); + + case OVS_KEY_ATTR_MPLS: + if (!eth_p_mpls(eth_type)) + return -EINVAL; + break; case OVS_KEY_ATTR_SCTP: if (flow_key->ip.proto != IPPROTO_SCTP) return -EINVAL; - return validate_tp_port(flow_key); + return validate_tp_port(flow_key, eth_type); default: return -EINVAL; @@ -1427,10 +1466,10 @@ static int copy_action(const struct nlattr *from, return 0; } -int ovs_nla_copy_actions(const struct nlattr *attr, - const struct sw_flow_key *key, - int depth, - struct sw_flow_actions **sfa) +static int ovs_nla_copy_actions__(const struct nlattr *attr, + const struct sw_flow_key *key, + int depth, struct sw_flow_actions **sfa, + __be16 eth_type) { const struct nlattr *a; int rem, err; @@ -1444,6 +1483,8 @@ int ovs_nla_copy_actions(const struct nlattr *attr, [OVS_ACTION_ATTR_OUTPUT] = sizeof(u32), [OVS_ACTION_ATTR_RECIRC] = sizeof(u32), [OVS_ACTION_ATTR_USERSPACE] = (u32)-1, + [OVS_ACTION_ATTR_PUSH_MPLS] = sizeof(struct ovs_action_push_mpls), + [OVS_ACTION_ATTR_POP_MPLS] = sizeof(__be16), [OVS_ACTION_ATTR_PUSH_VLAN] = sizeof(struct ovs_action_push_vlan), [OVS_ACTION_ATTR_POP_VLAN] = 0, [OVS_ACTION_ATTR_SET] = (u32)-1, @@ -1502,14 +1543,49 @@ int ovs_nla_copy_actions(const struct nlattr *attr, case OVS_ACTION_ATTR_RECIRC: break; + case OVS_ACTION_ATTR_PUSH_MPLS: { + const struct ovs_action_push_mpls *mpls = nla_data(a); + + if (!eth_p_mpls(mpls->mpls_ethertype)) + return -EINVAL; + /* Prohibit push MPLS other than to a white list + * of ethertypes that have a known tag order. + */ + if (eth_type != htons(ETH_P_IP) && + eth_type != htons(ETH_P_IPV6) && + eth_type != htons(ETH_P_ARP) && + eth_type != htons(ETH_P_RARP) && + !eth_p_mpls(eth_type)) + return -EINVAL; + eth_type = mpls->mpls_ethertype; + break; + } + + case OVS_ACTION_ATTR_POP_MPLS: + if (!eth_p_mpls(eth_type)) + return -EINVAL; + + /* Disallow subsequent L2.5+ set and mpls_pop actions + * as there is no check here to ensure that the new + * eth_type is valid and thus set actions could + * write off the end of the packet or otherwise + * corrupt it. + * + * Support for these actions is planned using packet + * recirculation. + */ + eth_type = htons(0); + break; + case OVS_ACTION_ATTR_SET: - err = validate_set(a, key, sfa, &skip_copy); + err = validate_set(a, key, sfa, &skip_copy, eth_type); if (err) return err; break; case OVS_ACTION_ATTR_SAMPLE: - err = validate_and_copy_sample(a, key, depth, sfa); + err = validate_and_copy_sample(a, key, depth, sfa, + eth_type); if (err) return err; skip_copy = true; @@ -1531,6 +1607,13 @@ int ovs_nla_copy_actions(const struct nlattr *attr, return 0; } +int ovs_nla_copy_actions(const struct nlattr *attr, + const struct sw_flow_key *key, + struct sw_flow_actions **sfa) +{ + return ovs_nla_copy_actions__(attr, key, 0, sfa, key->eth.type); +} + static int sample_action_to_attr(const struct nlattr *attr, struct sk_buff *skb) { const struct nlattr *a; diff --git a/datapath/flow_netlink.h b/datapath/flow_netlink.h index 4401510..b471ece 100644 --- a/datapath/flow_netlink.h +++ b/datapath/flow_netlink.h @@ -49,7 +49,7 @@ int ovs_nla_get_match(struct sw_flow_match *match, const struct nlattr *); int ovs_nla_copy_actions(const struct nlattr *attr, - const struct sw_flow_key *key, int depth, + const struct sw_flow_key *key, struct sw_flow_actions **sfa); int ovs_nla_put_actions(const struct nlattr *attr, int len, struct sk_buff *skb); diff --git a/datapath/linux/compat/gso.c b/datapath/linux/compat/gso.c index 9ded17c..d9b4485 100644 --- a/datapath/linux/compat/gso.c +++ b/datapath/linux/compat/gso.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/if.h> #include <linux/if_tunnel.h> +#include <linux/if_vlan.h> #include <linux/icmp.h> #include <linux/in.h> #include <linux/ip.h> @@ -38,6 +39,8 @@ #include <net/xfrm.h> #include "gso.h" +#include "mpls.h" +#include "vlan.h" #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) && \ !defined(HAVE_VLAN_BUG_WORKAROUND) @@ -50,10 +53,12 @@ MODULE_PARM_DESC(vlan_tso, "Enable TSO for VLAN packets"); #define vlan_tso true #endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0) static bool dev_supports_vlan_tx(struct net_device *dev) { -#if defined(HAVE_VLAN_BUG_WORKAROUND) +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) + return true; +#elif defined(HAVE_VLAN_BUG_WORKAROUND) return dev->features & NETIF_F_HW_VLAN_TX; #else /* Assume that the driver is buggy. */ @@ -61,24 +66,64 @@ static bool dev_supports_vlan_tx(struct net_device *dev) #endif } +/* Strictly this is not needed and will be optimised out + * as this code is guarded by if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0). + * It is here to make things explicit should the compatibility + * code be extended in some way prior extending its life-span + * beyond v3.11. + */ +static bool supports_mpls_gso(void) +{ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0) + return true; +#else + return false; +#endif +} + int rpl_dev_queue_xmit(struct sk_buff *skb) { #undef dev_queue_xmit int err = -ENOMEM; + bool vlan, mpls; + + vlan = mpls = false; + + if (eth_p_mpls(skb->protocol) && !supports_mpls_gso()) + mpls = true; + + if (vlan_tx_tag_present(skb) && !dev_supports_vlan_tx(skb->dev)) + vlan = true; - if (vlan_tx_tag_present(skb) && !dev_supports_vlan_tx(skb->dev)) { + if (vlan || mpls) { int features; features = netif_skb_features(skb); - if (!vlan_tso) - features &= ~(NETIF_F_TSO | NETIF_F_TSO6 | - NETIF_F_UFO | NETIF_F_FSO); + if (vlan) { + if (!vlan_tso) + features &= ~(NETIF_F_TSO | NETIF_F_TSO6 | + NETIF_F_UFO | NETIF_F_FSO); - skb = __vlan_put_tag(skb, skb->vlan_proto, vlan_tx_tag_get(skb)); - if (unlikely(!skb)) - return err; - vlan_set_tci(skb, 0); + skb = __vlan_put_tag(skb, skb->vlan_proto, + vlan_tx_tag_get(skb)); + if (unlikely(!skb)) + return err; + vlan_set_tci(skb, 0); + } + + /* As of v3.11 the kernel provides an mpls_features field in + * struct net_device which allows devices to advertise which + * features its supports for MPLS. This value defaults to + * NETIF_F_SG and as of v3.11. + * + * This compatibility code is intended for kernels older + * than v3.11 that do not support MPLS GSO and thus do not + * provide mpls_features. Thus this code uses NETIF_F_SG + * directly in place of mpls_features. + */ + if (mpls) + features &= NETIF_F_SG; if (netif_needs_gso(skb, features)) { struct sk_buff *nskb; @@ -117,13 +162,16 @@ drop: kfree_skb(skb); return err; } -#endif /* kernel version < 2.6.37 */ +#endif /* kernel version < 3.11.0 */ static __be16 __skb_network_protocol(struct sk_buff *skb) { __be16 type = skb->protocol; int vlan_depth = ETH_HLEN; + if (eth_p_mpls(skb->protocol)) + type = ovs_skb_get_inner_protocol(skb); + while (type == htons(ETH_P_8021Q) || type == htons(ETH_P_8021AD)) { struct vlan_hdr *vh; diff --git a/datapath/linux/compat/gso.h b/datapath/linux/compat/gso.h index b83a4c3..98b2aba 100644 --- a/datapath/linux/compat/gso.h +++ b/datapath/linux/compat/gso.h @@ -4,6 +4,7 @@ #include <linux/version.h> #if LINUX_VERSION_CODE < KERNEL_VERSION(3,12,0) +#include <linux/netdevice.h> #include <linux/skbuff.h> #include <net/protocol.h> @@ -14,6 +15,9 @@ struct ovs_gso_cb { sk_buff_data_t inner_network_header; sk_buff_data_t inner_mac_header; void (*fix_segment)(struct sk_buff *); +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0) + __be16 inner_protocol; +#endif }; #define OVS_GSO_CB(skb) ((struct ovs_gso_cb *)(skb)->cb) @@ -72,6 +76,41 @@ static inline void skb_reset_inner_headers(struct sk_buff *skb) #define ip_local_out rpl_ip_local_out int ip_local_out(struct sk_buff *skb); - #endif /* 3.12 */ + +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0) +static inline void ovs_skb_init_inner_protocol(struct sk_buff *skb) { + OVS_GSO_CB(skb)->inner_protocol = htons(0); +} + +static inline void ovs_skb_set_inner_protocol(struct sk_buff *skb, + __be16 ethertype) { + OVS_GSO_CB(skb)->inner_protocol = ethertype; +} + +static inline __be16 ovs_skb_get_inner_protocol(struct sk_buff *skb) +{ + return OVS_GSO_CB(skb)->inner_protocol; +} + +#else + +static inline void ovs_skb_init_inner_protocol(struct sk_buff *skb) { + /* Nothing to do. The inner_protocol is either zero or + * has been set to a value by another user. + * Either way it may be considered initialised. + */ +} + +static inline void ovs_skb_set_inner_protocol(struct sk_buff *skb, + __be16 ethertype) +{ + skb->inner_protocol = ethertype; +} + +static inline __be16 ovs_skb_get_inner_protocol(struct sk_buff *skb) +{ + return skb->inner_protocol; +} +#endif /* 3.11 */ #endif diff --git a/datapath/linux/compat/include/linux/netdevice.h b/datapath/linux/compat/include/linux/netdevice.h index d726390..0381002 100644 --- a/datapath/linux/compat/include/linux/netdevice.h +++ b/datapath/linux/compat/include/linux/netdevice.h @@ -64,11 +64,13 @@ static inline struct net_device *dev_get_by_index_rcu(struct net *net, int ifind typedef u32 netdev_features_t; #endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0) #define skb_gso_segment rpl_skb_gso_segment struct sk_buff *rpl_skb_gso_segment(struct sk_buff *skb, netdev_features_t features); +#endif +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #define netif_skb_features rpl_netif_skb_features netdev_features_t rpl_netif_skb_features(struct sk_buff *skb); @@ -113,7 +115,7 @@ static inline struct net_device *netdev_master_upper_dev_get(struct net_device * } #endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0) #define dev_queue_xmit rpl_dev_queue_xmit int dev_queue_xmit(struct sk_buff *skb); #endif diff --git a/datapath/linux/compat/netdevice.c b/datapath/linux/compat/netdevice.c index 1dc5abf..d22fced 100644 --- a/datapath/linux/compat/netdevice.c +++ b/datapath/linux/compat/netdevice.c @@ -1,6 +1,9 @@ #include <linux/netdevice.h> #include <linux/if_vlan.h> +#include "mpls.h" +#include "gso.h" + #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) #ifndef HAVE_CAN_CHECKSUM_PROTOCOL static bool can_checksum_protocol(netdev_features_t features, __be16 protocol) @@ -69,7 +72,9 @@ netdev_features_t rpl_netif_skb_features(struct sk_buff *skb) return harmonize_features(skb, protocol, features); } } +#endif /* kernel version < 2.6.38 */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0) struct sk_buff *rpl_skb_gso_segment(struct sk_buff *skb, netdev_features_t features) { @@ -78,6 +83,9 @@ struct sk_buff *rpl_skb_gso_segment(struct sk_buff *skb, __be16 skb_proto; struct sk_buff *skb_gso; + if (eth_p_mpls(skb->protocol)) + type = ovs_skb_get_inner_protocol(skb); + while (type == htons(ETH_P_8021Q)) { struct vlan_hdr *vh; @@ -98,4 +106,4 @@ struct sk_buff *rpl_skb_gso_segment(struct sk_buff *skb, skb->protocol = skb_proto; return skb_gso; } -#endif /* kernel version < 2.6.38 */ +#endif /* kernel version < 3.11.0 */ diff --git a/datapath/mpls.h b/datapath/mpls.h new file mode 100644 index 0000000..7eab104 --- /dev/null +++ b/datapath/mpls.h @@ -0,0 +1,15 @@ +#ifndef MPLS_H +#define MPLS_H 1 + +#include <linux/if_ether.h> + +#define MPLS_BOS_MASK 0x00000100 +#define MPLS_HLEN 4 + +static inline bool eth_p_mpls(__be16 eth_type) +{ + return eth_type == htons(ETH_P_MPLS_UC) || + eth_type == htons(ETH_P_MPLS_MC); +} + +#endif diff --git a/include/linux/openvswitch.h b/include/linux/openvswitch.h index d7f85ff..1095ece 100644 --- a/include/linux/openvswitch.h +++ b/include/linux/openvswitch.h @@ -318,15 +318,14 @@ enum ovs_key_attr { OVS_KEY_ATTR_DP_HASH, /* u32 hash value. Value 0 indicates the hash is not computed by the datapath. */ OVS_KEY_ATTR_RECIRC_ID, /* u32 recirc id */ + OVS_KEY_ATTR_MPLS, /* array of struct ovs_key_mpls. + * The implementation may restrict + * the accepted length of the array. */ + #ifdef __KERNEL__ /* Only used within kernel data path. */ OVS_KEY_ATTR_IPV4_TUNNEL, /* struct ovs_key_ipv4_tunnel */ #endif - /* Experimental */ - - OVS_KEY_ATTR_MPLS = 62, /* array of struct ovs_key_mpls. - * The implementation may restrict - * the accepted length of the array. */ __OVS_KEY_ATTR_MAX }; -- 1.8.5.2 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists