[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1400249647-4643-2-git-send-email-thomas.petazzoni@free-electrons.com>
Date: Fri, 16 May 2014 16:14:03 +0200
From: Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
To: "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
devicetree@...r.kernel.org
Cc: Florian Fainelli <florian@...nwrt.org>,
Tawfik Bayouk <tawfik@...vell.com>,
Nadav Haklai <nadavh@...vell.com>,
Lior Amsalem <alior@...vell.com>,
Gregory Clement <gregory.clement@...e-electrons.com>,
Ezequiel Garcia <ezequiel.garcia@...e-electrons.com>,
linux-arm-kernel@...ts.infradead.org,
Grant Likely <grant.likely@...retlab.ca>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sascha Hauer <s.hauer@...gutronix.de>,
Christian Gmeiner <christian.gmeiner@...il.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
Subject: [PATCHv4 1/5] net: phy: decouple PHY id and PHY address in fixed PHY driver
Until now, the fixed_phy_add() function was taking as argument
'phy_id', which was used both as the PHY address on the fake fixed
MDIO bus, and as the PHY id, as available in the MII_PHYSID1 and
MII_PHYSID2 registers. However, those two informations are completely
unrelated.
This patch decouples them. The PHY id of fixed PHYs is hardcoded to be
0x0. Ideally, a really reserved value would be nicer, but there
doesn't seem to be an easy of making sure a dummy value can be
assigned to the Linux kernel for such usage.
The PHY address remains passed by the caller of phy_fixed_add().
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
---
drivers/net/phy/fixed.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index ba55adf..e41546d 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -31,7 +31,7 @@ struct fixed_mdio_bus {
};
struct fixed_phy {
- int id;
+ int addr;
u16 regs[MII_REGS_NUM];
struct phy_device *phydev;
struct fixed_phy_status status;
@@ -104,8 +104,8 @@ static int fixed_phy_update_regs(struct fixed_phy *fp)
if (fp->status.asym_pause)
lpa |= LPA_PAUSE_ASYM;
- fp->regs[MII_PHYSID1] = fp->id >> 16;
- fp->regs[MII_PHYSID2] = fp->id;
+ fp->regs[MII_PHYSID1] = 0;
+ fp->regs[MII_PHYSID2] = 0;
fp->regs[MII_BMSR] = bmsr;
fp->regs[MII_BMCR] = bmcr;
@@ -115,7 +115,7 @@ static int fixed_phy_update_regs(struct fixed_phy *fp)
return 0;
}
-static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
+static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
{
struct fixed_mdio_bus *fmb = bus->priv;
struct fixed_phy *fp;
@@ -124,7 +124,7 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
return -1;
list_for_each_entry(fp, &fmb->phys, node) {
- if (fp->id == phy_id) {
+ if (fp->addr == phy_addr) {
/* Issue callback if user registered it. */
if (fp->link_update) {
fp->link_update(fp->phydev->attached_dev,
@@ -138,7 +138,7 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
return 0xFFFF;
}
-static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
+static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num,
u16 val)
{
return 0;
@@ -160,7 +160,7 @@ int fixed_phy_set_link_update(struct phy_device *phydev,
return -EINVAL;
list_for_each_entry(fp, &fmb->phys, node) {
- if (fp->id == phydev->phy_id) {
+ if (fp->addr == phydev->addr) {
fp->link_update = link_update;
fp->phydev = phydev;
return 0;
@@ -171,7 +171,7 @@ int fixed_phy_set_link_update(struct phy_device *phydev,
}
EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
-int fixed_phy_add(unsigned int irq, int phy_id,
+int fixed_phy_add(unsigned int irq, int phy_addr,
struct fixed_phy_status *status)
{
int ret;
@@ -184,9 +184,9 @@ int fixed_phy_add(unsigned int irq, int phy_id,
memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM);
- fmb->irqs[phy_id] = irq;
+ fmb->irqs[phy_addr] = irq;
- fp->id = phy_id;
+ fp->addr = phy_addr;
fp->status = *status;
ret = fixed_phy_update_regs(fp);
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists