[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <537D20EA.1000305@cogentembedded.com>
Date: Thu, 22 May 2014 01:55:54 +0400
From: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To: Florian Fainelli <f.fainelli@...il.com>, netdev@...r.kernel.org
CC: davem@...emloft.net,
Pantelis Antoniou <pantelis.antoniou@...il.com>,
Vitaly Bordug <vbordug@...mvista.com>,
Li Yang <leoli@...escale.com>,
Grant Likely <grant.likely@...aro.org>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Aida Mynzhasova <aida.mynzhasova@...tlab.ru>,
Richard Cochran <richardcochran@...il.com>,
Claudiu Manoil <claudiu.manoil@...escale.com>,
"open list:OPEN FIRMWARE AND..." <devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
"open list:LINUX FOR POWERPC..." <linuxppc-dev@...ts.ozlabs.org>
Subject: Re: [PATCH RESEND net-next 4/9] net: systemport: use the new fixed
PHY helpers
On 05/22/2014 01:38 AM, Florian Fainelli wrote:
> of_phy_connect_fixed_link() is becoming obsolete, and also required
> platform code to register the fixed PHYs at the specified addresses for
> those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
> plus of_phy_register_fixed_link() helpers to transition over the new
> scheme.
> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
> ---
> drivers/net/ethernet/broadcom/bcmsysport.c | 17 +++++++++++++++--
> drivers/net/ethernet/broadcom/bcmsysport.h | 1 +
> 2 files changed, 16 insertions(+), 2 deletions(-)
> diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
> index d40c5b969e9e..dc708a888f80 100644
> --- a/drivers/net/ethernet/broadcom/bcmsysport.c
> +++ b/drivers/net/ethernet/broadcom/bcmsysport.c
> @@ -1327,8 +1327,8 @@ static int bcm_sysport_open(struct net_device *dev)
> /* Read CRC forward */
> priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD);
>
> - priv->phydev = of_phy_connect_fixed_link(dev, bcm_sysport_adj_link,
> - priv->phy_interface);
> + priv->phydev = of_phy_connect(dev, priv->phy_dn, bcm_sysport_adj_link,
> + 0, priv->phy_interface);
The continuation line should start on the next character after ( on the
above line, according to the networking coding style.
[...]
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists