[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGVrzcbBQFhw-dUh+tFm8H5m9-fmVgutChS8wUG-F6sTBoRq-g@mail.gmail.com>
Date: Wed, 21 May 2014 15:02:42 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
Cc: netdev <netdev@...r.kernel.org>,
David Miller <davem@...emloft.net>,
Pantelis Antoniou <pantelis.antoniou@...il.com>,
Vitaly Bordug <vbordug@...mvista.com>,
Li Yang <leoli@...escale.com>,
Grant Likely <grant.likely@...aro.org>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Aida Mynzhasova <aida.mynzhasova@...tlab.ru>,
Richard Cochran <richardcochran@...il.com>,
Claudiu Manoil <claudiu.manoil@...escale.com>,
"open list:OPEN FIRMWARE AND..." <devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
"open list:LINUX FOR POWERPC..." <linuxppc-dev@...ts.ozlabs.org>
Subject: Re: [PATCH RESEND net-next 4/9] net: systemport: use the new fixed
PHY helpers
2014-05-21 14:55 GMT-07:00 Sergei Shtylyov <sergei.shtylyov@...entembedded.com>:
> On 05/22/2014 01:38 AM, Florian Fainelli wrote:
>
>> of_phy_connect_fixed_link() is becoming obsolete, and also required
>> platform code to register the fixed PHYs at the specified addresses for
>> those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
>> plus of_phy_register_fixed_link() helpers to transition over the new
>> scheme.
>
>
>> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
>> ---
>> drivers/net/ethernet/broadcom/bcmsysport.c | 17 +++++++++++++++--
>> drivers/net/ethernet/broadcom/bcmsysport.h | 1 +
>> 2 files changed, 16 insertions(+), 2 deletions(-)
>
>
>> diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c
>> b/drivers/net/ethernet/broadcom/bcmsysport.c
>> index d40c5b969e9e..dc708a888f80 100644
>> --- a/drivers/net/ethernet/broadcom/bcmsysport.c
>> +++ b/drivers/net/ethernet/broadcom/bcmsysport.c
>> @@ -1327,8 +1327,8 @@ static int bcm_sysport_open(struct net_device *dev)
>> /* Read CRC forward */
>> priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD);
>>
>> - priv->phydev = of_phy_connect_fixed_link(dev,
>> bcm_sysport_adj_link,
>> -
>> priv->phy_interface);
>> + priv->phydev = of_phy_connect(dev, priv->phy_dn,
>> bcm_sysport_adj_link,
>> + 0, priv->phy_interface);
>
>
> The continuation line should start on the next character after ( on the
> above line, according to the networking coding style.
Unless I am once again not following the coding style, the patch in
patchwork has this correctly, and so does my file locally:
http://patchwork.ozlabs.org/patch/351323/
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists