[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <537E3218.6030104@cogentembedded.com>
Date: Thu, 22 May 2014 21:21:28 +0400
From: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To: Florian Fainelli <f.fainelli@...il.com>
CC: netdev <netdev@...r.kernel.org>,
David Miller <davem@...emloft.net>,
Pantelis Antoniou <pantelis.antoniou@...il.com>,
Vitaly Bordug <vbordug@...mvista.com>,
Li Yang <leoli@...escale.com>,
Grant Likely <grant.likely@...aro.org>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Aida Mynzhasova <aida.mynzhasova@...tlab.ru>,
Richard Cochran <richardcochran@...il.com>,
Claudiu Manoil <claudiu.manoil@...escale.com>,
"open list:OPEN FIRMWARE AND..." <devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
"open list:LINUX FOR POWERPC..." <linuxppc-dev@...ts.ozlabs.org>
Subject: Re: [PATCH RESEND net-next 4/9] net: systemport: use the new fixed
PHY helpers
Hello.
On 05/22/2014 02:02 AM, Florian Fainelli wrote:
>>> of_phy_connect_fixed_link() is becoming obsolete, and also required
>>> platform code to register the fixed PHYs at the specified addresses for
>>> those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
>>> plus of_phy_register_fixed_link() helpers to transition over the new
>>> scheme.
>>> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
>>> ---
>>> drivers/net/ethernet/broadcom/bcmsysport.c | 17 +++++++++++++++--
>>> drivers/net/ethernet/broadcom/bcmsysport.h | 1 +
>>> 2 files changed, 16 insertions(+), 2 deletions(-)
>>> diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c
>>> b/drivers/net/ethernet/broadcom/bcmsysport.c
>>> index d40c5b969e9e..dc708a888f80 100644
>>> --- a/drivers/net/ethernet/broadcom/bcmsysport.c
>>> +++ b/drivers/net/ethernet/broadcom/bcmsysport.c
>>> @@ -1327,8 +1327,8 @@ static int bcm_sysport_open(struct net_device *dev)
>>> /* Read CRC forward */
>>> priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD);
>>>
>>> - priv->phydev = of_phy_connect_fixed_link(dev,
>>> bcm_sysport_adj_link,
>>> -
>>> priv->phy_interface);
>>> + priv->phydev = of_phy_connect(dev, priv->phy_dn,
>>> bcm_sysport_adj_link,
>>> + 0, priv->phy_interface);
>> The continuation line should start on the next character after ( on the
>> above line, according to the networking coding style.
> Unless I am once again not following the coding style, the patch in
> patchwork has this correctly, and so does my file locally:
> http://patchwork.ozlabs.org/patch/351323/
Don't know about your local file but the patchwork still has the
indentation wrong. -- you've used only tabs while the last several characters
should have been spaces. However, if David himself finds it correct, I guess I
just need to shut up. :-)
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists