| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1401456988-11395-3-git-send-email-sathya.perla@emulex.com>
Date: Fri, 30 May 2014 19:06:24 +0530
From: Sathya Perla <sathya.perla@...lex.com>
To: <netdev@...r.kernel.org>
Subject: [PATCH net-next v2 2/6] be2net: fixup TX-rate setting code for Skyhawk-R
From: Ravikumar Nelavelli <ravikumar.nelavelli@...lex.com>
Skyhawk-R FW supports TX-rate setting only as a % value of the link
speed, set via the SET_PROFILE_CONFIG cmd.
This patch makes the necessary changes to the FW cmd descriptors to support
the above change and also introduces checks in be_set_vf_tx_rate() to allow
only discrete values (that map to % of the link-speed).
Signed-off-by: Sathya Perla <sathya.perla@...lex.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 40 +++++++++++-----
drivers/net/ethernet/emulex/benet/be_cmds.h | 13 ++++--
drivers/net/ethernet/emulex/benet/be_main.c | 66 ++++++++++++++++++---------
3 files changed, 81 insertions(+), 38 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 476752d..216463b 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -3562,33 +3562,47 @@ void be_reset_nic_desc(struct be_nic_res_desc *nic)
nic->cq_count = 0xFFFF;
nic->toe_conn_count = 0xFFFF;
nic->eq_count = 0xFFFF;
+ nic->iface_count = 0xFFFF;
nic->link_param = 0xFF;
+ nic->channel_id_param = cpu_to_le16(0xF000);
nic->acpi_params = 0xFF;
nic->wol_param = 0x0F;
- nic->bw_min = 0xFFFFFFFF;
+ nic->tunnel_iface_count = 0xFFFF;
+ nic->direct_tenant_iface_count = 0xFFFF;
nic->bw_max = 0xFFFFFFFF;
}
-int be_cmd_config_qos(struct be_adapter *adapter, u32 bps, u8 domain)
+int be_cmd_config_qos(struct be_adapter *adapter, u32 max_rate, u16 link_speed,
+ u8 domain)
{
- if (lancer_chip(adapter)) {
- struct be_nic_res_desc nic_desc;
+ struct be_nic_res_desc nic_desc;
+ u32 bw_percent;
+ u16 version = 0;
+
+ if (BE3_chip(adapter))
+ return be_cmd_set_qos(adapter, max_rate / 10, domain);
- be_reset_nic_desc(&nic_desc);
+ be_reset_nic_desc(&nic_desc);
+ nic_desc.pf_num = adapter->pf_number;
+ nic_desc.vf_num = domain;
+ if (lancer_chip(adapter)) {
nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V0;
nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V0;
nic_desc.flags = (1 << QUN_SHIFT) | (1 << IMM_SHIFT) |
(1 << NOSV_SHIFT);
- nic_desc.pf_num = adapter->pf_number;
- nic_desc.vf_num = domain;
- nic_desc.bw_max = cpu_to_le32(bps);
-
- return be_cmd_set_profile_config(adapter, &nic_desc,
- RESOURCE_DESC_SIZE_V0,
- 0, domain);
+ nic_desc.bw_max = cpu_to_le32(max_rate / 10);
} else {
- return be_cmd_set_qos(adapter, bps, domain);
+ version = 1;
+ nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V1;
+ nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V1;
+ nic_desc.flags = (1 << IMM_SHIFT) | (1 << NOSV_SHIFT);
+ bw_percent = max_rate ? (max_rate * 100) / link_speed : 100;
+ nic_desc.bw_max = cpu_to_le32(bw_percent);
}
+
+ return be_cmd_set_profile_config(adapter, &nic_desc,
+ nic_desc.hdr.desc_len,
+ version, domain);
}
int be_cmd_manage_iface(struct be_adapter *adapter, u32 iface, u8 op)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 228d4b6..9df9d3b 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1891,16 +1891,20 @@ struct be_nic_res_desc {
u16 cq_count;
u16 toe_conn_count;
u16 eq_count;
- u32 rsvd5;
+ u16 vlan_id;
+ u16 iface_count;
u32 cap_flags;
u8 link_param;
- u8 rsvd6[3];
+ u8 rsvd6;
+ u16 channel_id_param;
u32 bw_min;
u32 bw_max;
u8 acpi_params;
u8 wol_param;
u16 rsvd7;
- u32 rsvd8[7];
+ u16 tunnel_iface_count;
+ u16 direct_tenant_iface_count;
+ u32 rsvd8[6];
} __packed;
/************ Multi-Channel type ***********/
@@ -2101,7 +2105,8 @@ int be_cmd_get_seeprom_data(struct be_adapter *adapter,
int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
u8 loopback_type, u8 enable);
int be_cmd_get_phy_info(struct be_adapter *adapter);
-int be_cmd_config_qos(struct be_adapter *adapter, u32 bps, u8 domain);
+int be_cmd_config_qos(struct be_adapter *adapter, u32 max_rate,
+ u16 link_speed, u8 domain);
void be_detect_error(struct be_adapter *adapter);
int be_cmd_get_die_temperature(struct be_adapter *adapter);
int be_cmd_get_cntl_attributes(struct be_adapter *adapter);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 9116d5e..d39a1c6 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1352,7 +1352,10 @@ static int be_set_vf_tx_rate(struct net_device *netdev, int vf,
int min_tx_rate, int max_tx_rate)
{
struct be_adapter *adapter = netdev_priv(netdev);
- int status = 0;
+ struct device *dev = &adapter->pdev->dev;
+ int percent_rate, status = 0;
+ u16 link_speed = 0;
+ u8 link_status;
if (!sriov_enabled(adapter))
return -EPERM;
@@ -1363,18 +1366,47 @@ static int be_set_vf_tx_rate(struct net_device *netdev, int vf,
if (min_tx_rate)
return -EINVAL;
- if (max_tx_rate < 100 || max_tx_rate > 10000) {
- dev_err(&adapter->pdev->dev,
- "max tx rate must be between 100 and 10000 Mbps\n");
- return -EINVAL;
+ if (!max_tx_rate)
+ goto config_qos;
+
+ status = be_cmd_link_status_query(adapter, &link_speed,
+ &link_status, 0);
+ if (status)
+ goto err;
+
+ if (!link_status) {
+ dev_err(dev, "TX-rate setting not allowed when link is down\n");
+ status = -EPERM;
+ goto err;
+ }
+
+ if (max_tx_rate < 100 || max_tx_rate > link_speed) {
+ dev_err(dev, "TX-rate must be between 100 and %d Mbps\n",
+ link_speed);
+ status = -EINVAL;
+ goto err;
}
- status = be_cmd_config_qos(adapter, max_tx_rate / 10, vf + 1);
+ /* On Skyhawk the QOS setting must be done only as a % value */
+ percent_rate = link_speed / 100;
+ if (skyhawk_chip(adapter) && (max_tx_rate % percent_rate)) {
+ dev_err(dev, "TX-rate must be a multiple of %d Mbps\n",
+ percent_rate);
+ status = -EINVAL;
+ goto err;
+ }
+
+config_qos:
+ status = be_cmd_config_qos(adapter, max_tx_rate, link_speed, vf + 1);
if (status)
- dev_err(&adapter->pdev->dev,
- "max tx rate %d on VF %d failed\n", max_tx_rate, vf);
- else
- adapter->vf_cfg[vf].tx_rate = max_tx_rate;
+ goto err;
+
+ adapter->vf_cfg[vf].tx_rate = max_tx_rate;
+ return 0;
+
+err:
+ dev_err(dev, "TX-rate setting of %dMbps on VF%d failed\n",
+ max_tx_rate, vf);
return status;
}
static int be_set_vf_link_state(struct net_device *netdev, int vf,
@@ -3135,7 +3167,6 @@ static int be_vf_setup(struct be_adapter *adapter)
struct be_vf_cfg *vf_cfg;
int status, old_vfs, vf;
u32 privileges;
- u16 lnk_speed;
old_vfs = pci_num_vf(adapter->pdev);
if (old_vfs) {
@@ -3191,16 +3222,9 @@ static int be_vf_setup(struct be_adapter *adapter)
vf);
}
- /* BE3 FW, by default, caps VF TX-rate to 100mbps.
- * Allow full available bandwidth
- */
- if (BE3_chip(adapter) && !old_vfs)
- be_cmd_config_qos(adapter, 1000, vf + 1);
-
- status = be_cmd_link_status_query(adapter, &lnk_speed,
- NULL, vf + 1);
- if (!status)
- vf_cfg->tx_rate = lnk_speed;
+ /* Allow full available bandwidth */
+ if (!old_vfs)
+ be_cmd_config_qos(adapter, 0, 0, vf + 1);
if (!old_vfs) {
be_cmd_enable_vf(adapter, vf + 1);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists