netdev - Re: [PATCH net-next v2 1/6] be2net: skip multicast promiscuos setting in already set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <53888CD0.50403@cogentembedded.com>
Date:	Fri, 30 May 2014 17:51:12 +0400
From:	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To:	Sathya Perla <sathya.perla@...lex.com>, netdev@...r.kernel.org
Subject: Re: [PATCH net-next v2 1/6] be2net: skip multicast promiscuos setting
 in already set

Hello.

On 05/30/2014 05:36 PM, Sathya Perla wrote:

> From: Kalesh AP <kalesh.purayil@...lex.com>

> Set mc-promisc (multicast promiscuous) mode on an interface, only if it is
> *not already* in that mode.

> Also removed logs that report interface being set to multicast
> promiscous mode. In an earlier comment on the netdev list such log messages
> were deemed unnecessary as this behaviour is common across most of the
> ethernet drivers.

> Signed-off-by: Kalesh AP <kalesh.purayil@...lex.com>
> Signed-off-by: Sathya Perla <sathya.perla@...lex.com>

[...]

> diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
> index e1d445d..9116d5e 100644
> --- a/drivers/net/ethernet/emulex/benet/be_main.c
> +++ b/drivers/net/ethernet/emulex/benet/be_main.c
[...]
> @@ -1244,15 +1242,22 @@ static void be_set_rx_mode(struct net_device *netdev)
>   	}
>
>   	status = be_cmd_rx_filter(adapter, IFF_MULTICAST, ON);
> -
> -	/* Set to MCAST promisc mode if setting MULTICAST address fails */
> -	if (status) {
> -		dev_info(&adapter->pdev->dev,
> -			 "Exhausted multicast HW filters.\n");
> -		dev_info(&adapter->pdev->dev,
> -			 "Disabling HW multicast filtering.\n");
> -		be_cmd_rx_filter(adapter, IFF_ALLMULTI, ON);
> +	if (!status) {
> +		if (adapter->flags & BE_FLAGS_MCAST_PROMISC)
> +			adapter->flags &= ~BE_FLAGS_MCAST_PROMISC;

    Why not just clear it without prior check?

> +		goto done;
>   	}
[...]

WBR, Sergei


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html