[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <E603DC592C92B54A89CEF6B0919A0B1CAFDE223D13@SOLO.hq.farsitecommunications.com>
Date: Mon, 2 Jun 2014 09:56:26 +0100
From: Kevin Curtis <Kevin.Curtis@...site.com>
To: Manuel Schölling <manuel.schoelling@....de>
CC: "davem@...emloft.net" <davem@...emloft.net>,
"joe@...ches.com" <joe@...ches.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] wan: Use usleep_range()
Hi Manuel,
This look fine to me.
Regards
Kevin
-----Original Message-----
From: Manuel Schölling [mailto:manuel.schoelling@....de]
Sent: 31 May 2014 16:08
To: Kevin Curtis
Cc: davem@...emloft.net; joe@...ches.com; netdev@...r.kernel.org; linux-kernel@...r.kernel.org; Manuel Schölling
Subject: [PATCH] wan: Use usleep_range()
Instead of using a jiffies hack we can use the standard api for delays.
Signed-off-by: Manuel Schölling <manuel.schoelling@....de>
---
drivers/net/wan/farsync.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index bcfff0d..02f6d1c 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -26,6 +26,7 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
#include <linux/if.h>
#include <linux/hdlc.h>
#include <asm/io.h>
@@ -678,7 +679,6 @@ static inline void
fst_cpureset(struct fst_card_info *card) {
unsigned char interrupt_line_register;
- unsigned long j = jiffies + 1;
unsigned int regval;
if (card->family == FST_FAMILY_TXU) {
@@ -696,16 +696,12 @@ fst_cpureset(struct fst_card_info *card)
/*
* We are delaying here to allow the 9054 to reset itself
*/
- j = jiffies + 1;
- while (jiffies < j)
- /* Do nothing */ ;
+ usleep_range(10, 20);
outw(0x240f, card->pci_conf + CNTRL_9054 + 2);
/*
* We are delaying here to allow the 9054 to reload its eeprom
*/
- j = jiffies + 1;
- while (jiffies < j)
- /* Do nothing */ ;
+ usleep_range(10, 20);
outw(0x040f, card->pci_conf + CNTRL_9054 + 2);
if (pci_write_config_byte
--
1.7.10.4
Powered by blists - more mailing lists